All MIBs › G6-HARDWARE-MIB › cableTestConfigStartTestNow
cableTestConfigStartTestNow
Module: G6-HARDWARE-MIB
OID (symbolic): G6-HARDWARE-MIB::cableTestConfigStartTestNow
OID (numeric): 1.3.6.1.4.1.3181.10.6.1.31.6.1.4
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: May be used to manually start a cable test. ATTENTION: If the port is in link up status it will be forced to link down first. This will disrupt the current data traffic. Therefore, type start_test_now = CONFIRM.
What is cableTestConfigStartTestNow?
Read-write string used to manually kick off a cable test on this port by writing the value CONFIRM. Because a link-up port will be forced down first, disrupting traffic, an admin should only use this during a maintenance window.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3181.10.6.1.31.6.1.4 snmpwalk -v2c -c public <target> G6-HARDWARE-MIB::cableTestConfigStartTestNow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3181.10.6.1.31.6.1.4.1 snmpget -v2c -c public <target> G6-HARDWARE-MIB::cableTestConfigStartTestNow.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3181.10.6.1.31.6.1.4.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cableTestConfigStartTestNow.1
Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (cable test/LED/module diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the G6-HARDWARE-MIB::cableTestConfigStartTestNow OID value, configure state conditions and alerts, and monitor any MICROSENS Generation 6 (G6) managed Ethernet switch (cable test/LED/module diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3181 | microsens | MICROSENS-G6-MIB |
| 1.3.6.1.4.1.3181.10 | managedSwitches | MICROSENS-G6-MIB |
| 1.3.6.1.4.1.3181.10.6 | g6 | MICROSENS-G6-MIB |
| 1.3.6.1.4.1.3181.10.6.1 | device | G6-FACTORY-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3181.10.6.1.31 | hardware | G6-HARDWARE-MIB |
| 1.3.6.1.4.1.3181.10.6.1.31.6 | cableTestConfigTable | G6-HARDWARE-MIB |
| 1.3.6.1.4.1.3181.10.6.1.31.6.1 | cableTestConfigEntry | G6-HARDWARE-MIB |
| 1.3.6.1.4.1.3181.10.6.1.31.6.1.4 | cableTestConfigStartTestNow | G6-HARDWARE-MIB |