All MIBs › G6-HARDWARE-MIB › cableTestConfigEnableAutoCableTest
cableTestConfigEnableAutoCableTest
Module: G6-HARDWARE-MIB
OID (symbolic): G6-HARDWARE-MIB::cableTestConfigEnableAutoCableTest
OID (numeric): 1.3.6.1.4.1.3181.10.6.1.31.6.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When enabled a cable test is performed each time the link goes down. The test is only performed for copper ports or dual media ports in copper mode.
What is cableTestConfigEnableAutoCableTest?
Read-write flag that, when enabled, makes the switch automatically run a copper cable test on this port every time its link goes down, applying only to copper or dual-media ports in copper mode. Useful for automatically capturing cable-fault diagnostics right when a link drop occurs, rather than requiring a manual test later.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3181.10.6.1.31.6.1.2 snmpwalk -v2c -c public <target> G6-HARDWARE-MIB::cableTestConfigEnableAutoCableTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3181.10.6.1.31.6.1.2.1 snmpget -v2c -c public <target> G6-HARDWARE-MIB::cableTestConfigEnableAutoCableTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3181.10.6.1.31.6.1.2.1 i <value>
Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (cable test/LED/module diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the G6-HARDWARE-MIB::cableTestConfigEnableAutoCableTest OID value, configure state conditions and alerts, and monitor any MICROSENS Generation 6 (G6) managed Ethernet switch (cable test/LED/module diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3181 | microsens | MICROSENS-G6-MIB |
| 1.3.6.1.4.1.3181.10 | managedSwitches | MICROSENS-G6-MIB |
| 1.3.6.1.4.1.3181.10.6 | g6 | MICROSENS-G6-MIB |
| 1.3.6.1.4.1.3181.10.6.1 | device | G6-FACTORY-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3181.10.6.1.31 | hardware | G6-HARDWARE-MIB |
| 1.3.6.1.4.1.3181.10.6.1.31.6 | cableTestConfigTable | G6-HARDWARE-MIB |
| 1.3.6.1.4.1.3181.10.6.1.31.6.1 | cableTestConfigEntry | G6-HARDWARE-MIB |
| 1.3.6.1.4.1.3181.10.6.1.31.6.1.2 | cableTestConfigEnableAutoCableTest | G6-HARDWARE-MIB |