Fore-SONET-MIB :: sonetPathPointerDiagnostic

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsFore-SONET-MIBsonetPathPointerDiagnostic

sonetPathPointerDiagnostic

Module: Fore-SONET-MIB

OID (symbolic): Fore-SONET-MIB::sonetPathPointerDiagnostic

OID (numeric): 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.29

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This variable controls the insertion of various types of path pointer diagnostic bit patterns in the transmit stream. It is a bit map that is netmod specific. Under normal operation it should be set to:

1 None -- No diagnostics

2 FTPTR -- Controls the insertion of the pointer value contained in the Arbitrary Pointer Registers into the stream. This allows upstream payload mapping circuitry to continue functioning normally and a valid SPE to continue to be generated, although it is unlikely to be extraced by downstream circuitry which should be in a loss of pointer state. If FTPTR is on, the APTR[9:0] bits of the Arbitrary Pointer Registers are inserted into the H1 and H2 bytes of the stream. At least one corrupted pointer is guaranteed to be sent.

What is sonetPathPointerDiagnostic?

A bitmapped control for path-pointer diagnostics on this port's transmit stream: FTPTR (bit 2) forces the value from sonetArbitraryPointer into the H1/H2 pointer bytes, guaranteeing at least one corrupted pointer while keeping the SPE valid; 1 means no diagnostics. An admin uses FTPTR together with sonetArbitraryPointer to test whether downstream circuitry correctly enters a loss-of-pointer state.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.29
snmpwalk -v2c -c public <target> Fore-SONET-MIB::sonetPathPointerDiagnostic

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.29.1
snmpget -v2c -c public <target> Fore-SONET-MIB::sonetPathPointerDiagnostic.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.29.1 i <value>

Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch with SONET/SDH port modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-SONET-MIB::sonetPathPointerDiagnostic OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch with SONET/SDH port modules from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.326marconiES1000-MIB
1.3.6.1.4.1.326.2systemsES1000-MIB
1.3.6.1.4.1.326.2.2atmSwitchFore-Common-MIB
1.3.6.1.4.1.326.2.2.1hardwareFore-Common-MIB
1.3.6.1.4.1.326.2.2.1.1asxFore-Common-MIB
Numeric OIDNameModule
1.3.6.1.4.1.326.2.2.1.1.4foreSonetModuleFore-SONET-MIB
1.3.6.1.4.1.326.2.2.1.1.4.1sonetConfGroupFore-SONET-MIB
1.3.6.1.4.1.326.2.2.1.1.4.1.1sonetConfTableFore-SONET-MIB
1.3.6.1.4.1.326.2.2.1.1.4.1.1.1sonetConfEntryFore-SONET-MIB
1.3.6.1.4.1.326.2.2.1.1.4.1.1.1.29sonetPathPointerDiagnosticFore-SONET-MIB