All MIBs › Fore-DS1-MIB › ds1SendCode
ds1SendCode
Module: Fore-DS1-MIB
OID (symbolic): Fore-DS1-MIB::ds1SendCode
OID (numeric): 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable indicates what type of code is being sent across the DS1 interface by the device.
The values mean: ds1SendNoCode sending looped or normal data ds1SendLineCode sending request for a line loopback ds1SendPayloadCode sending a request for a payload loopback ds1SendResetCode sending a loopback termination request ds1SendQRS sending a Quasi-Random Signal (QRS) test pattern ds1Send511Pattern sending a 511 bit fixed test pattern ds1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24 ds1SendTestPattern sending a test pattern other than the above.
What is ds1SendCode?
Controls what test or loopback code the switch is currently transmitting on this DS1 interface, such as a request for a line or payload loopback, a QRS pattern, or normal (looped/normal) data. A technician sets this to ds1SendPayloadCode(3), for example, to remotely request the far end enter payload loopback for circuit testing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.6 snmpwalk -v2c -c public <target> Fore-DS1-MIB::ds1SendCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.6.1 snmpget -v2c -c public <target> Fore-DS1-MIB::ds1SendCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ds1SendCode.1
Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (DS1/T1 trunk port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-DS1-MIB::ds1SendCode OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (DS1/T1 trunk port module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1 | hardware | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1.1 | asx | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.7 | foreDs1 | Fore-DS1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.7.1 | ds1ConfGroup | Fore-DS1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1 | ds1ConfTable | Fore-DS1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1 | ds1ConfEntry | Fore-DS1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.6 | ds1SendCode | Fore-DS1-MIB |