All MIBs › Fore-DS1-MIB › ds1LineLength
ds1LineLength
Module: Fore-DS1-MIB
OID (symbolic): Fore-DS1-MIB::ds1LineLength
OID (numeric): 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable represents the length of the physical cable connected to the ds1 port. The user has to set this object to match the physical cable in order to get the netmod to receive the signal on the cable.
The different values are: ds1LineLt110 (1) means the line is shorter than 110 ft, ds1Line110-220 (2) means the line length is between 110 and 220 ft, ds1Line220-330 (3) means the line length is between 220 and 330 ft, ds1Line330-440 (4) means the line length is between 330 and 440 ft, ds1Line440-550 (5) means the line length is between 440 and 550 ft, ds1Line550-660 (6) means the line length is between 550 and 660 ft, ds1LineGt655 (7) means the line is longer than 655 ft.
What is ds1LineLength?
Specifies the physical cable length range connecting this DS1 port to its cross-connect or far-end equipment, in bands like ds1Line110-220 (110-220 ft) up through ds1LineGt655 (over 655 ft). It must be set to match the actual cable run so the line driver applies the correct equalization to receive the signal cleanly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.15 snmpwalk -v2c -c public <target> Fore-DS1-MIB::ds1LineLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.15.1 snmpget -v2c -c public <target> Fore-DS1-MIB::ds1LineLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.15.1 i <value>
Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (DS1/T1 trunk port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fore-DS1-MIB::ds1LineLength OID value, configure state conditions and alerts, and monitor any Fore Systems (later Marconi) ForeRunner ATM switch (DS1/T1 trunk port module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.2 | atmSwitch | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1 | hardware | Fore-Common-MIB |
| 1.3.6.1.4.1.326.2.2.1.1 | asx | Fore-Common-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.7 | foreDs1 | Fore-DS1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.7.1 | ds1ConfGroup | Fore-DS1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1 | ds1ConfTable | Fore-DS1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1 | ds1ConfEntry | Fore-DS1-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.15 | ds1LineLength | Fore-DS1-MIB |