All MIBs › FOUNDRY-SN-POS-GROUP-MIB › snPOSInfo2SSM
snPOSInfo2SSM
Module: FOUNDRY-SN-POS-GROUP-MIB
OID (symbolic): FOUNDRY-SN-POS-GROUP-MIB::snPOSInfo2SSM
OID (numeric): 1.3.6.1.4.1.1991.1.2.14.1.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The S(ynchronization) S(tatus) M(essage) is sent over the SONET/SDH line to tell the other end about the quality of clock being sent over the line.
t1SonetPrimaryReferenceSource(1) - SONET Primary Reference Source t1SonetTraceabilityUnknown(2} - SONET Traceability Unknown t1SonetStratum2Traceable(3) - SONET Stratum 2 Traceable t1SonetTransitNodeClock(4) - SONET Transit Node Clock t1SonetStratum3eTraceable(5) - SONET Stratum 3e Traceable t1SonetStratum3Traceable(6) - SONET Stratum 3 Traceable t1SonetMinClockTraceable(7) - SONET Minimum Clock Traceable t1SonetDus(8) - SONET Do not Use for Synchronization e1SdhTraceabilityUnknown(9) - SDH Traceability Unknown e1SdhSsmTransitNodeClockG812(10) - SDH Transit Node Clock G812 e1SdhDus(11) - SDH Do not Use for Synchronization e1SdhSsmPrimaryReferenceClockG811(12) - SDH Primary Reference Clock G811 e1SdhSsmLocalG812(13) - SDH Local G812 e1SdhSsmSyncEquipmentTimingSource(14) - SDH Synchronization Equipment Timing Source
What is snPOSInfo2SSM?
Selects which Synchronization Status Message quality level (e.g. Stratum 2, Stratum 3e, primary reference source) this POS interface advertises over the SONET/SDH line to tell the far end the quality of the clock it is sending, defaulting to traceability-unknown.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.14.1.2.1.6 snmpwalk -v2c -c public <target> FOUNDRY-SN-POS-GROUP-MIB::snPOSInfo2SSM
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1991.1.2.14.1.2.1.6.1 snmpget -v2c -c public <target> FOUNDRY-SN-POS-GROUP-MIB::snPOSInfo2SSM.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1991.1.2.14.1.2.1.6.1 i <value>
Start monitoring Brocade/Foundry FastIron switch/router with SONET/POS WAN module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FOUNDRY-SN-POS-GROUP-MIB::snPOSInfo2SSM OID value, configure state conditions and alerts, and monitor any Brocade/Foundry FastIron switch/router with SONET/POS WAN module from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1991 | foundry | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1 | products | FOUNDRY-SN-ROOT-MIB |
| 1.3.6.1.4.1.1991.1.2 | router | FOUNDRY-SN-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1991.1.2.14 | snPOS | FOUNDRY-SN-POS-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.2.14.1 | snPOSInfo | FOUNDRY-SN-POS-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.2.14.1.2 | snPOSInfo2Table | FOUNDRY-SN-POS-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.2.14.1.2.1 | snPOSInfo2Entry | FOUNDRY-SN-POS-GROUP-MIB |
| 1.3.6.1.4.1.1991.1.2.14.1.2.1.6 | snPOSInfo2SSM | FOUNDRY-SN-POS-GROUP-MIB |