All MIBs › EdgeSwitch-QOS-COS-MIB › agentCosQueueMgmtTypeIntf
agentCosQueueMgmtTypeIntf
Module: EdgeSwitch-QOS-COS-MIB
OID (symbolic): EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtTypeIntf
OID (numeric): 1.3.6.1.4.1.4413.1.1.3.3.2.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The management technique used for all queues on this interface. If taildrop(1), then all new packets presented to the queues are dropped based on some maximum threshold value(s). If wred(2), then an active queue management scheme is employed whereby packet drop precedence is considered during times of queue congestion using WRED parameters. The necessary queue management parameters are specified in the agentCosQueueMgmtTable for the corresponding agentCosQueueIntfIndex value. The default for this object is taildrop(1).
Implementations that support this object but do not support weighted RED must return taildrop(1) for this value and must not allow a value of wred(2) to be set.
What is agentCosQueueMgmtTypeIntf?
Selects the queue-congestion management technique used for all queues on this interface - taildrop (drop new packets past a threshold) or wred (weighted random early discard based on drop precedence); defaults to taildrop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.2.3.1.3 snmpwalk -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtTypeIntf
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.2.3.1.3.1 snmpget -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtTypeIntf.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.3.3.2.3.1.3.1 i <value>
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtTypeIntf OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| 1.3.6.1.4.1.4413.1.1.3 | fastPathQOS | EdgeSwitch-QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.3.3 | fastPathQOSCOS | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2 | agentCosQueueCfgGroup | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.3 | agentCosQueueControlTable | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.3.1 | agentCosQueueControlEntry | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.3.1.3 | agentCosQueueMgmtTypeIntf | EdgeSwitch-QOS-COS-MIB |