All MIBs › EdgeSwitch-QOS-COS-MIB › agentCosQueueMgmtType
agentCosQueueMgmtType
Module: EdgeSwitch-QOS-COS-MIB
OID (symbolic): EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtType
OID (numeric): 1.3.6.1.4.1.4413.1.1.3.3.2.4.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The queue depth management technique used when per-queue specification is supported. If taildrop(1), then all new packets presented to the queue are dropped based on some maximum threshold value(s). If wred(2), then an active queue management scheme is employed whereby packet drop precedence is considered during times of queue congestion using WRED parameters. The necessary queue management parameters are specified in the agentCosQueueMgmtEntry for the corresponding agentCosQueueIntfIndex and agentCosQueueIndex values. The default for this object is taildrop(1).
Implementations that do not support weighted RED must return taildrop(1) for this value and must not allow a value of wred(2) to be set.
What is agentCosQueueMgmtType?
Selects the per-queue congestion management technique - taildrop or wred - overriding the interface-wide default when per-queue management is supported; defaults to taildrop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.2.4.1.5 snmpwalk -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.2.4.1.5.1 snmpget -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.3.3.2.4.1.5.1 i <value>
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtType OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| 1.3.6.1.4.1.4413.1.1.3 | fastPathQOS | EdgeSwitch-QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.3.3 | fastPathQOSCOS | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2 | agentCosQueueCfgGroup | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.4 | agentCosQueueTable | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.4.1 | agentCosQueueEntry | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.4.1.5 | agentCosQueueMgmtType | EdgeSwitch-QOS-COS-MIB |