All MIBs › EdgeSwitch-QOS-COS-MIB › agentCosQueueMgmtPercentWredMinThreshold
agentCosQueueMgmtPercentWredMinThreshold
Module: EdgeSwitch-QOS-COS-MIB
OID (symbolic): EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold
OID (numeric): 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.7
Node type: OBJECT-TYPE
Type: Percent
Access: read-write
Description: Weighted RED minimum queue threshold, below which no packets are dropped for the current drop precedence level. The value specifies the threshold based on a percentage of the overall device queue size. Since device implementations vary, the actual value deployed may be rounded up or down accordingly.
The default value, for all queues, is 100% for non-TCP traffic, 40%, 30% and 20% for TCP drop precedences 1, 2 and 3.
This object is only used when agentCosQueueMgmtType is set to wred(2). Any value set for this object must be equal to or less than the value of agentCosQueueMgmtPercentWredMaxThreshold.
What is agentCosQueueMgmtPercentWredMinThreshold?
Sets the WRED minimum queue threshold for this drop-precedence level as a percentage of the overall queue size, below which no packets are dropped; defaults to 40%/30%/20% for TCP drop precedences 1/2/3, and must not exceed the corresponding WRED max threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.7 snmpwalk -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.7.1 snmpget -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.7.1 s <value>
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| 1.3.6.1.4.1.4413.1.1.3 | fastPathQOS | EdgeSwitch-QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.3.3 | fastPathQOSCOS | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2 | agentCosQueueCfgGroup | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.5 | agentCosQueueMgmtTable | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.5.1 | agentCosQueueMgmtEntry | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.7 | agentCosQueueMgmtPercentWredMinThreshold | EdgeSwitch-QOS-COS-MIB |