All MIBs › EdgeSwitch-QOS-COS-MIB › agentCosQueueMgmtPercentWredMaxThreshold
agentCosQueueMgmtPercentWredMaxThreshold
Module: EdgeSwitch-QOS-COS-MIB
OID (symbolic): EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtPercentWredMaxThreshold
OID (numeric): 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.8
Node type: OBJECT-TYPE
Type: Percent
Access: read-write
Description: Weighted RED maximum queue threshold, above which all packets are dropped for the current drop precedence level. The value specifies the threshold based on a percentage of the overall device queue size. Since device implementations vary, the actual value deployed may be rounded up or down accordingly.
The default value, for all queues, is 100% for drop precedence 1 and non-TCP traffic, 90% and 80% for drop precedences 2 and 3.
This object is only used when agentCosQueueMgmtType is set to wred(2). Any value set for this object must be equal to or greater than the value of agentCosQueueMgmtPercentWredMinThreshold.
What is agentCosQueueMgmtPercentWredMaxThreshold?
Sets the WRED maximum queue threshold for this drop-precedence level as a percentage of the overall queue size, above which all packets are dropped; defaults to 100% for drop precedence 1, 90%/80% for precedences 2/3, and must not be less than the corresponding WRED min threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.8 snmpwalk -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtPercentWredMaxThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.8.1 snmpget -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtPercentWredMaxThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.8.1 s <value>
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-COS-MIB::agentCosQueueMgmtPercentWredMaxThreshold OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| 1.3.6.1.4.1.4413.1.1.3 | fastPathQOS | EdgeSwitch-QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.3.3 | fastPathQOSCOS | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2 | agentCosQueueCfgGroup | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.5 | agentCosQueueMgmtTable | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.5.1 | agentCosQueueMgmtEntry | EdgeSwitch-QOS-COS-MIB |
| 1.3.6.1.4.1.4413.1.1.3.3.2.5.1.8 | agentCosQueueMgmtPercentWredMaxThreshold | EdgeSwitch-QOS-COS-MIB |