EdgeSwitch-QOS-COS-MIB :: agentCosMapUntrustedTrafficClass

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-QOS-COS-MIB › agentCosMapUntrustedTrafficClass

agentCosMapUntrustedTrafficClass

Module: EdgeSwitch-QOS-COS-MIB

OID (symbolic): EdgeSwitch-QOS-COS-MIB::agentCosMapUntrustedTrafficClass

OID (numeric): 1.3.6.1.4.1.4413.1.1.3.3.1.3.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The traffic class (i.e. hardware queue) to which all untrusted traffic is assigned. This includes all traffic when the agentCosMapIntfTrustMode is set to untrusted(1), or just non-IP packets when in trustIpPrecedence(3) or trustIpDscp(4) modes.

This is a read-only object that reflects the current setting of the dot1dPortDefaultUserPriority object as mapped to a traffic class through the dot1dTrafficClassEntry.

What is agentCosMapUntrustedTrafficClass?

Reports the hardware queue that untrusted traffic on this interface is assigned to - all traffic when the port's trust mode is untrusted, or just non-IP traffic when trusting IP precedence/DSCP - reflecting the port's default user-priority mapping.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.1.3.1.3
snmpwalk -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosMapUntrustedTrafficClass

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.3.1.3.1.3.1
snmpget -v2c -c public <target> EdgeSwitch-QOS-COS-MIB::agentCosMapUntrustedTrafficClass.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agentCosMapUntrustedTrafficClass.1

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-COS-MIB::agentCosMapUntrustedTrafficClass OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (CoS queue mapping/802.1p priority) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
1.3.6.1.4.1.4413.1.1.3fastPathQOSEdgeSwitch-QOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.3.3fastPathQOSCOSEdgeSwitch-QOS-COS-MIB
1.3.6.1.4.1.4413.1.1.3.3.1agentCosMapCfgGroupEdgeSwitch-QOS-COS-MIB
1.3.6.1.4.1.4413.1.1.3.3.1.3agentCosMapIntfTrustTableEdgeSwitch-QOS-COS-MIB
1.3.6.1.4.1.4413.1.1.3.3.1.3.1agentCosMapIntfTrustEntryEdgeSwitch-QOS-COS-MIB
1.3.6.1.4.1.4413.1.1.3.3.1.3.1.3agentCosMapUntrustedTrafficClassEdgeSwitch-QOS-COS-MIB