EdgeSwitch-PORTSECURITY-PRIVATE-MIB :: agentPortSecurityMACAddressRemove

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-PORTSECURITY-PRIVATE-MIB › agentPortSecurityMACAddressRemove

agentPortSecurityMACAddressRemove

Module: EdgeSwitch-PORTSECURITY-PRIVATE-MIB

OID (symbolic): EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressRemove

OID (numeric): 1.3.6.1.4.1.4413.1.1.20.1.2.1.9

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This MIB variable accepts a VLAN id and MAC address to be removed from the list of statically locked MAC addresses on a port.. The VLAN id and MAC address combination would be entered in a particular fashion like :- 2 a0:b0:c0:d1:e2:a1(the vlan-id and MAC address separated by a blank-space).

What is agentPortSecurityMACAddressRemove?

This read-write value accepts a VLAN ID and MAC address to remove a matching entry from this port's list of statically locked MAC addresses. An admin writes to this object to revoke access for a device that was previously whitelisted, such as decommissioned hardware, without having to clear the entire static list. For example, writing "2 a0:b0:c0:d1:e2:a1" removes that specific VLAN and MAC pairing from the port's static allow-list.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.20.1.2.1.9
snmpwalk -v2c -c public <target> EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressRemove

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.20.1.2.1.9.1
snmpget -v2c -c public <target> EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressRemove.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.20.1.2.1.9.1 s <value>

Start monitoring Ubiquiti EdgeSwitch managed switch (port security/MAC locking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressRemove OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch managed switch (port security/MAC locking) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.20fastPathPortSecurityEdgeSwitch-PORTSECURITY-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.20.1agentPortSecurityGroupEdgeSwitch-PORTSECURITY-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.20.1.2agentPortSecurityTableEdgeSwitch-PORTSECURITY-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.20.1.2.1agentPortSecurityEntryEdgeSwitch-PORTSECURITY-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.20.1.2.1.9agentPortSecurityMACAddressRemoveEdgeSwitch-PORTSECURITY-PRIVATE-MIB