EdgeSwitch-PORTSECURITY-PRIVATE-MIB :: agentPortSecurityMACAddressAdd

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-PORTSECURITY-PRIVATE-MIB › agentPortSecurityMACAddressAdd

agentPortSecurityMACAddressAdd

Module: EdgeSwitch-PORTSECURITY-PRIVATE-MIB

OID (symbolic): EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressAdd

OID (numeric): 1.3.6.1.4.1.4413.1.1.20.1.2.1.8

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This MIB variable accepts a VLAN id, MAC address and the sticky value to be added to the list of statically locked MAC addresses on a port. The VLAN id, MAC address and sticky value combination would be entered in a particular fashion like :- 2 a0:b0:c0:d1:e2:a1 1(the vlan-id, MAC address and sticky value separated by blank-spaces).

What is agentPortSecurityMACAddressAdd?

This read-write value accepts a VLAN ID, MAC address, and sticky flag to add a new entry to this port's list of statically locked MAC addresses. An admin writes to this object to whitelist a specific known device on a locked port, using the sticky flag to control whether the entry persists like a manually configured static entry. For example, writing "2 a0:b0:c0:d1:e2:a1 1" statically permits that MAC on VLAN 2 for this port as a sticky entry.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.20.1.2.1.8
snmpwalk -v2c -c public <target> EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressAdd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.20.1.2.1.8.1
snmpget -v2c -c public <target> EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressAdd.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.20.1.2.1.8.1 s <value>

Start monitoring Ubiquiti EdgeSwitch managed switch (port security/MAC locking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressAdd OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch managed switch (port security/MAC locking) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.20fastPathPortSecurityEdgeSwitch-PORTSECURITY-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.20.1agentPortSecurityGroupEdgeSwitch-PORTSECURITY-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.20.1.2agentPortSecurityTableEdgeSwitch-PORTSECURITY-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.20.1.2.1agentPortSecurityEntryEdgeSwitch-PORTSECURITY-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.20.1.2.1.8agentPortSecurityMACAddressAddEdgeSwitch-PORTSECURITY-PRIVATE-MIB