All MIBs › EdgeSwitch-PORTSECURITY-PRIVATE-MIB › agentGlobalPortSecurityStickyMode
agentGlobalPortSecurityStickyMode
Module: EdgeSwitch-PORTSECURITY-PRIVATE-MIB
OID (symbolic): EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentGlobalPortSecurityStickyMode
OID (numeric): 1.3.6.1.4.1.4413.1.1.20.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to apply the Sticky Mode to all ports. This is write-only value. It always returns 'disable' on request
What is agentGlobalPortSecurityStickyMode?
This read-write value applies sticky mode to all ports on the switch at once, though this object always reads back as disable regardless of the last value written. An admin uses this to enable sticky learning across every port in one operation instead of configuring agentPortSecurityStickyMode port by port, but must track the applied state separately since GET never reflects it. For example, writing enable(1) here would sticky-lock the first learned device on every port switch-wide, even though a subsequent GET on this object would still show disable(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.20.1.4 snmpwalk -v2c -c public <target> EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentGlobalPortSecurityStickyMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.20.1.4.1 snmpget -v2c -c public <target> EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentGlobalPortSecurityStickyMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.20.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agentGlobalPortSecurityStickyMode.1
Start monitoring Ubiquiti EdgeSwitch managed switch (port security/MAC locking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-PORTSECURITY-PRIVATE-MIB::agentGlobalPortSecurityStickyMode OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch managed switch (port security/MAC locking) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.20 | fastPathPortSecurity | EdgeSwitch-PORTSECURITY-PRIVATE-MIB |
| 1.3.6.1.4.1.4413.1.1.20.1 | agentPortSecurityGroup | EdgeSwitch-PORTSECURITY-PRIVATE-MIB |
| 1.3.6.1.4.1.4413.1.1.20.1.4 | agentGlobalPortSecurityStickyMode | EdgeSwitch-PORTSECURITY-PRIVATE-MIB |