EdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB :: agentSwitchDenialOfServiceICMPv6Size

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB › agentSwitchDenialOfServiceICMPv6Size

agentSwitchDenialOfServiceICMPv6Size

Module: EdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB

OID (symbolic): EdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPv6Size

OID (numeric): 1.3.6.1.4.1.4413.1.1.31.1.18

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Configures the Maximum allowed ICMPv6 data size. This is active if the ICMPv6 Denial of Service protection feature is enabled.

What is agentSwitchDenialOfServiceICMPv6Size?

This read-write Integer32 (0..1023) sets the maximum allowed ICMPv6 data size the switch will accept, active only when ICMPv6 DoS protection is enabled. It caps oversized ICMPv6 payloads that are characteristic of a flood attack, causing the switch to drop packets exceeding this limit. The default value is 1023, matching the maximum of its own range, but an admin could reduce it, for example to 512, to be more restrictive.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.31.1.18
snmpwalk -v2c -c public <target> EdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPv6Size

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.31.1.18.1
snmpget -v2c -c public <target> EdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPv6Size.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.31.1.18.1 i <value>

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (hardware DoS attack protection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPv6Size OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (hardware DoS attack protection) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.31fastPathDenialOfServiceEdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.31.1agentSwitchDenialOfServiceGroupEdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.31.1.18agentSwitchDenialOfServiceICMPv6SizeEdgeSwitch-DENIALOFSERVICE-PRIVATE-MIB