All MIBs › DES3810-52-SWITCH-RESOURCE-MGMT-MIB › swSwitchResourceMgmtSRMMode
swSwitchResourceMgmtSRMMode
Module: DES3810-52-SWITCH-RESOURCE-MGMT-MIB
OID (symbolic): DES3810-52-SWITCH-RESOURCE-MGMT-MIB::swSwitchResourceMgmtSRMMode
OID (numeric): 1.3.6.1.4.1.171.11.114.1.3.4.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The switch configure SRM mode, it need be saved and will be taken effect after reboot.
What is swSwitchResourceMgmtSRMMode?
This value configures which Switch Resource Management (SRM) mode, routing or vpws (virtual private wire service), the switch should operate in, and any change here needs to be saved and only takes effect after the device is rebooted. Administrators set this to reallocate the switch's internal hardware resources toward either standard IP routing workloads or Layer-2 VPWS pseudowire services, depending on how the switch is being deployed. For example, an admin repurposing a switch from a routed-access role to a Metro-Ethernet pseudowire role would set this to vpws(2) and then reboot the device to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.114.1.3.4.1.2 snmpwalk -v2c -c public <target> DES3810-52-SWITCH-RESOURCE-MGMT-MIB::swSwitchResourceMgmtSRMMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.114.1.3.4.1.2.1 snmpget -v2c -c public <target> DES3810-52-SWITCH-RESOURCE-MGMT-MIB::swSwitchResourceMgmtSRMMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.114.1.3.4.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> swSwitchResourceMgmtSRMMode.1
Start monitoring D-Link DES-3810-52 switch (hardware resource utilization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3810-52-SWITCH-RESOURCE-MGMT-MIB::swSwitchResourceMgmtSRMMode OID value, configure state conditions and alerts, and monitor any D-Link DES-3810-52 switch (hardware resource utilization) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.114 | dlink_Des3810Series | SW3810PRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.114.1 | des3810 | SW3810PRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.114.1.3 | des3810_52 | SW3810PRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.114.1.3.4 | swSwitchResourceMgmtMIB | DES3810-52-SWITCH-RESOURCE-MGMT-MIB |
| 1.3.6.1.4.1.171.11.114.1.3.4.1 | swSwitchResourceMgmtMIBObjects | DES3810-52-SWITCH-RESOURCE-MGMT-MIB |
| 1.3.6.1.4.1.171.11.114.1.3.4.1.2 | swSwitchResourceMgmtSRMMode | DES3810-52-SWITCH-RESOURCE-MGMT-MIB |