CITRIX-NetScaler-SD-WAN-MIB :: sdWANStatsRuleLastActiveNMinuteAgo

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCITRIX-NetScaler-SD-WAN-MIBsdWANStatsRuleLastActiveNMinuteAgo

sdWANStatsRuleLastActiveNMinuteAgo

Module: CITRIX-NetScaler-SD-WAN-MIB

OID (symbolic): CITRIX-NetScaler-SD-WAN-MIB::sdWANStatsRuleLastActiveNMinuteAgo

OID (numeric): 1.3.6.1.4.1.3845.31.4.2.2.14.2.1.12

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-only

Description: This rule was hit last N Minutes ago. If this field value is 0 and either sdWANStatsRuleBytesSent or sdWANStatsRuleBytesReceived is not zero, then that means that this rule is currently being used. The rule statistics contain the latest values. If this field is > 0, then the rule statistics is plateaued to show that this rule was used N minutes ago.

What is sdWANStatsRuleLastActiveNMinuteAgo?

This read-only TimeTicks value reports how many minutes ago this rule was last hit; per the MIB, a value of 0 combined with nonzero sent or received bytes means the rule is currently active and its statistics reflect the latest traffic. An admin uses this to distinguish a currently busy rule from one that matched traffic a while ago but has since gone idle. For example, a rule showing a nonzero "last active" value despite configured application traffic still flowing would suggest that traffic is no longer being classified by this particular rule.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3845.31.4.2.2.14.2.1.12
snmpwalk -v2c -c public <target> CITRIX-NetScaler-SD-WAN-MIB::sdWANStatsRuleLastActiveNMinuteAgo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3845.31.4.2.2.14.2.1.12.1
snmpget -v2c -c public <target> CITRIX-NetScaler-SD-WAN-MIB::sdWANStatsRuleLastActiveNMinuteAgo.1

Start monitoring Citrix NetScaler SD-WAN appliance with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CITRIX-NetScaler-SD-WAN-MIB::sdWANStatsRuleLastActiveNMinuteAgo OID value, configure state conditions and alerts, and monitor any Citrix NetScaler SD-WAN appliance from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3845citrixCITRIX-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3845.31sdWANMIBCITRIX-NetScaler-SD-WAN-MIB
1.3.6.1.4.1.3845.31.4sdWANStatusMIBCITRIX-NetScaler-SD-WAN-MIB
1.3.6.1.4.1.3845.31.4.2sdWANObjectsCITRIX-NetScaler-SD-WAN-MIB
1.3.6.1.4.1.3845.31.4.2.2sdWANStatisticsCITRIX-NetScaler-SD-WAN-MIB
1.3.6.1.4.1.3845.31.4.2.2.14sdWANStatsRulesCITRIX-NetScaler-SD-WAN-MIB
1.3.6.1.4.1.3845.31.4.2.2.14.2sdWANStatsRuleTableCITRIX-NetScaler-SD-WAN-MIB
1.3.6.1.4.1.3845.31.4.2.2.14.2.1sdWANStatsRuleEntryCITRIX-NetScaler-SD-WAN-MIB
1.3.6.1.4.1.3845.31.4.2.2.14.2.1.12sdWANStatsRuleLastActiveNMinuteAgoCITRIX-NetScaler-SD-WAN-MIB