BRCM-CM-MGMT-EXT-MIB :: cmScanPushFrequency

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BRCM-CM-MGMT-EXT-MIB › cmScanPushFrequency

cmScanPushFrequency

Module: BRCM-CM-MGMT-EXT-MIB

OID (symbolic): BRCM-CM-MGMT-EXT-MIB::cmScanPushFrequency

OID (numeric): 1.3.6.1.4.1.4413.50.1.1.99.4413.2.2.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Setting this object will add a new entry to the cmScanTable. The new entry will be at index 1, and all existing entries will be re-indexed starting at 2. If the table is full, the last entry in the table will be dropped. If the value set here already exists in the table, it will be moved from its current position in the table to become entry 1 (a duplicate entry will not be added). Setting this object to a value of 0 will flush the cmScanTable. When read, this object always returns 0.

What is cmScanPushFrequency?

Allows an operator to insert a downstream frequency at the top of the cable modem's scan list, pushing the modem to try that frequency when searching for a DOCSIS channel. Writing a value here adds it as the first scan candidate and shifts all existing entries down, dropping the last if the list is full.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.99.4413.2.2.1
snmpwalk -v2c -c public <target> BRCM-CM-MGMT-EXT-MIB::cmScanPushFrequency

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.99.4413.2.2.1.1
snmpget -v2c -c public <target> BRCM-CM-MGMT-EXT-MIB::cmScanPushFrequency.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.50.1.1.99.4413.2.2.1.1 i <value>

Start monitoring Broadcom-based cable modems/gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRCM-CM-MGMT-EXT-MIB::cmScanPushFrequency OID value, configure state conditions and alerts, and monitor any Broadcom-based cable modems/gateways from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.50brcmCableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1cableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1cableDataMgmtBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1.99cableDataMgmtVendorBRCM-CABLEDATA-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.99.4413broadcomCableDataMgmtBRCM-CABLEDATA-MGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.50.1.1.99.4413.2cmMgmtExtBRCM-CM-MGMT-EXT-MIB
1.3.6.1.4.1.4413.50.1.1.99.4413.2.2cmMgmtExtScanBRCM-CM-MGMT-EXT-MIB
1.3.6.1.4.1.4413.50.1.1.99.4413.2.2.1cmScanPushFrequencyBRCM-CM-MGMT-EXT-MIB