All MIBs › BLADETYPE2-ACL-MIB › aclBlockNewCfgAddAcl
aclBlockNewCfgAddAcl
Module: BLADETYPE2-ACL-MIB
OID (symbolic): BLADETYPE2-ACL-MIB::aclBlockNewCfgAddAcl
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The index of the ACL entry to be added into this ACL block. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclBlockNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
What is aclBlockNewCfgAddAcl?
Allows an operator to add a specific ACL entry (by index) to an ACL block in the pending configuration. Writing the ACL index sets the corresponding bit in the aclBlockNewCfgMemberAcls bitmap; reading always returns zero.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.3 snmpwalk -v2c -c public <target> BLADETYPE2-ACL-MIB::aclBlockNewCfgAddAcl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.3.1 snmpget -v2c -c public <target> BLADETYPE2-ACL-MIB::aclBlockNewCfgAddAcl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.3.1 i <value>
Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-ACL-MIB::aclBlockNewCfgAddAcl OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.1 | hpSwitchModuleBladetype2 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2 | hpSwitchBladeType2_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9 | acl | BLADETYPE2-ACL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1 | acConfig | BLADETYPE2-ACL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2 | aclBlock | BLADETYPE2-ACL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2 | aclBlockNewCfgTable | BLADETYPE2-ACL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1 | aclBlockNewCfgEntry | BLADETYPE2-ACL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.9.1.2.2.1.3 | aclBlockNewCfgAddAcl | BLADETYPE2-ACL-MIB |