All MIBs › APPIAN-PPORT-ETHERNET-MIB › acEnetCfgPauseAdminMode
acEnetCfgPauseAdminMode
Module: APPIAN-PPORT-ETHERNET-MIB
OID (symbolic): APPIAN-PPORT-ETHERNET-MIB::acEnetCfgPauseAdminMode
OID (numeric): 1.3.6.1.4.1.2785.2.3.3.2.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to configure the default administrative PAUSE mode for this interface.
This object represents the administratively-configured PAUSE mode for this interface. If auto-negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines the operational PAUSE mode of the interface whenever it is operating in full-duplex mode. In this case, a set to this object will force the interface into the specified mode.
If auto-negotiation is implemented and enabled for the MAU attached to this interface, the PAUSE mode for this interface is determined by auto-negotiation, and the value of this object denotes the mode to which the interface will automatically revert if/when auto-negotiation is later disabled.
Note that the value of this object is ignored when the interface is not operating in full-duplex mode.
An attempt to set this object to 'enabledXmit(2)' or 'enabledRcv(3)' will fail on interfaces that do not support operation at greater than 100 Mb/s.
What is acEnetCfgPauseAdminMode?
Sets the administrative PAUSE flow control mode for the Ethernet interface, determining how the port signals a connected peer to pause transmission when its receive buffers are filling up. If auto-negotiation is not active, this configured value is applied directly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2785.2.3.3.2.1.20 snmpwalk -v2c -c public <target> APPIAN-PPORT-ETHERNET-MIB::acEnetCfgPauseAdminMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2785.2.3.3.2.1.20.1 snmpget -v2c -c public <target> APPIAN-PPORT-ETHERNET-MIB::acEnetCfgPauseAdminMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2785.2.3.3.2.1.20.1 i <value>
Start monitoring Appian Communications OSAP SONET/optical access platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPIAN-PPORT-ETHERNET-MIB::acEnetCfgPauseAdminMode OID value, configure state conditions and alerts, and monitor any Appian Communications OSAP SONET/optical access platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2785 | appian | APPIAN-SMI-MIB |
| 1.3.6.1.4.1.2785.2 | acOsap | APPIAN-SMI-MIB |
| 1.3.6.1.4.1.2785.2.3 | acPport | APPIAN-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2785.2.3.3 | acEnet | APPIAN-PPORT-ETHERNET-MIB |
| 1.3.6.1.4.1.2785.2.3.3.2 | acEnetCfgTable | APPIAN-PPORT-ETHERNET-MIB |
| 1.3.6.1.4.1.2785.2.3.3.2.1 | acEnetCfgEntry | APPIAN-PPORT-ETHERNET-MIB |
| 1.3.6.1.4.1.2785.2.3.3.2.1.20 | acEnetCfgPauseAdminMode | APPIAN-PPORT-ETHERNET-MIB |