All MIBs › AISYSTEM-MIB › aiSysSTConnType
aiSysSTConnType
Module: AISYSTEM-MIB
OID (symbolic): AISYSTEM-MIB::aiSysSTConnType
OID (numeric): 1.3.6.1.4.1.539.8.4.4.1.7
Node type: OBJECT-TYPE
Type: AIIConnType
Access: read-only
Description:
Identifies the connector type for the statum. If a statum is internal to the device, aiSysSTFaceplateOpening equal to 0, then its connector type should be 'noConnType'. If a statum has a proprietary connector then its connector type should be 'propConnType'.
What is aiSysSTConnType?
This object identifies the physical connector type (such as RJ45, SC fiber, DB9 serial, or SFP slot) used by a statum (monitorable device component) in an Applied Innovation system. If a statum is internal to the device, this value is set to 'noConnType'; otherwise it indicates the external connector standard. An operator would use this to understand the physical interface requirements when adding or troubleshooting equipment connections.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.539.8.4.4.1.7 snmpwalk -v2c -c public <target> AISYSTEM-MIB::aiSysSTConnType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.539.8.4.4.1.7.1 snmpget -v2c -c public <target> AISYSTEM-MIB::aiSysSTConnType.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.539 | aii | AIDIALOUT-MIB |
| 1.3.6.1.4.1.539.8 | aiSystem | AISYSTEM-MIB |
| 1.3.6.1.4.1.539.8.4 | aiSystemDisc | AISYSTEM-MIB |
| 1.3.6.1.4.1.539.8.4.4 | aiSysDiscStatumTable | AISYSTEM-MIB |
| 1.3.6.1.4.1.539.8.4.4.1 | aiSysStatumTableEntry | AISYSTEM-MIB |
| 1.3.6.1.4.1.539.8.4.4.1.7 | aiSysSTConnType | AISYSTEM-MIB |