ADH3-NETCOM-MIB :: lowerAlarmLimit

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ADH3-NETCOM-MIB › lowerAlarmLimit

lowerAlarmLimit

Module: ADH3-NETCOM-MIB

OID (symbolic): ADH3-NETCOM-MIB::lowerAlarmLimit

OID (numeric): 1.3.6.1.4.1.32185.2.2.3

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: The pressure, in PSI, below which the unit declares a low pressure alarm

What is lowerAlarmLimit?

This OID records the pressure threshold below which the device triggers a low-pressure alarm condition, expressed in PSI as a 10-character string. You would check this value to understand at what point the system stops operating normally and alerts you to dangerously low pressure, or tune it if your process tolerates lower pressures than the default. A typical value like "20.0 PSI" means any reading below 20 PSI triggers an alarm.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.32185.2.2.3
snmpwalk -v2c -c public <target> ADH3-NETCOM-MIB::lowerAlarmLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.32185.2.2.3.1
snmpget -v2c -c public <target> ADH3-NETCOM-MIB::lowerAlarmLimit.1

Start monitoring Environmental Technology Inc. compressor/environment controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADH3-NETCOM-MIB::lowerAlarmLimit OID value, configure state conditions and alerts, and monitor any Environmental Technology Inc. compressor/environment controllers from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.32185environmentalTechnologyADH-NETCOM-MIB
1.3.6.1.4.1.32185.2netcomADH-NETCOM-MIB
1.3.6.1.4.1.32185.2.2paramsInfoADH-NETCOM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.32185.2.2.3lowerAlarmLimitADH3-NETCOM-MIB