All MIBs › A3COM0420-SWITCH-EXTENSIONS › prConStackPaceMode
prConStackPaceMode
Module: A3COM0420-SWITCH-EXTENSIONS
OID (symbolic): A3COM0420-SWITCH-EXTENSIONS::prConStackPaceMode
OID (numeric): 1.3.6.1.4.1.43.10.34.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the type of backoff algorithm used on the
units in the stack. Any suitable port can use the standard
ethernet algorithm or, for PACE applications, it can be set into
low latency mode. In this mode, the backoff algorithm is
optimised to minimise the possibility of collisions. The value
of this object defines the setting that those ports will use
which have prConPortPaceMode set to useDefault(2).
PACE mode can be set for the whole stack or for individual
ports. When a unit is initialised to factory defaults,
prconPortPaceMode for every port is set to useDefault(2), and
the actual setting for the port is decided by the value of this
object. The manager has the choice, therefore, of varying the
mode for every port in the stack, or for individual ports only.
What is prConStackPaceMode?
This configures the backoff algorithm for collision handling in stacked switches, choosing between standard Ethernet or optimized low-latency PACE mode. PACE mode reduces collision probability for specialized time-sensitive applications. This setting applies globally to all ports using the default backoff method.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.34.1.2 snmpwalk -v2c -c public <target> A3COM0420-SWITCH-EXTENSIONS::prConStackPaceMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.34.1.2.1 snmpget -v2c -c public <target> A3COM0420-SWITCH-EXTENSIONS::prConStackPaceMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.34.1.2.1 i <value>
Start monitoring Legacy 3Com switch stacking equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0420-SWITCH-EXTENSIONS::prConStackPaceMode OID value, configure state conditions and alerts, and monitor any Legacy 3Com switch stacking equipment from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.34 | brasica2 | A3COM0004-GENERIC |
| 1.3.6.1.4.1.43.10.34.1 | stackConfigGroup | A3COM0054-BRASICA2-SPECIFIC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.2 | prConStackPaceMode | A3COM0420-SWITCH-EXTENSIONS |