All MIBs › A3COM0420-SWITCH-EXTENSIONS › prConPortIFM
prConPortIFM
Module: A3COM0420-SWITCH-EXTENSIONS
OID (symbolic): A3COM0420-SWITCH-EXTENSIONS::prConPortIFM
OID (numeric): 1.3.6.1.4.1.43.10.34.2.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls Intelligent Flow Management for the port,
which specifies what action the port takes whenever it is unable
to receive a packet because its buffers are full. When set to
off(2), the packet is dropped immediately. If it is set to any
of the values maxJams6(3) to maxJams13(10), a jam signal is
transmitted to the segment attached to the port to force a
collision so that the originator will stop and retransmit the
frame. This will be repeated a maximum of 6 to 13 times
depending on the setting. If the port is then still unable to
receive the packet it is dropped. Intelligent Flow Management
should be disabled on ports which are connected to ree Rapid Spanning Tree Protocol,
defined by IEEE Std. 802.1w.
What is prConPortIFM?
This OID manages Intelligent Flow Management, controlling how a port handles packets when its buffers are full. When set to off(2), packets are dropped; other values enable jam signals to force senders to retransmit. Engineers configure this to balance network congestion handling, for example using maxJams8(5) to allow several retry attempts before dropping.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.34.2.1.1.13 snmpwalk -v2c -c public <target> A3COM0420-SWITCH-EXTENSIONS::prConPortIFM
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.34.2.1.1.13.1 snmpget -v2c -c public <target> A3COM0420-SWITCH-EXTENSIONS::prConPortIFM.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.34.2.1.1.13.1 i <value>
Start monitoring Legacy 3Com switch stacking equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0420-SWITCH-EXTENSIONS::prConPortIFM OID value, configure state conditions and alerts, and monitor any Legacy 3Com switch stacking equipment from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.34 | brasica2 | A3COM0004-GENERIC |
| 1.3.6.1.4.1.43.10.34.2 | switchConfigGroup | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.2.1 | prConfigPortTable | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.2.1.1 | prConfigPortEntry | A3COM0054-BRASICA2-SPECIFIC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.34.2.1.1.13 | prConPortIFM | A3COM0420-SWITCH-EXTENSIONS |