All MIBs › A3COM0054-BRASICA2-SPECIFIC › prConStackPaceMode
prConStackPaceMode
Module: A3COM0054-BRASICA2-SPECIFIC
OID (symbolic): A3COM0054-BRASICA2-SPECIFIC::prConStackPaceMode
OID (numeric): 1.3.6.1.4.1.43.10.34.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the type of backoff algorithm used on the units in the stack. Any port can use the standard ethernet algorithm or, for PACE applications, it can be set into low latency mode. In this mode, the backoff algorithm is optimised to minimise the possibility of collisions. The value of this object defines the setting that those ports will use which have prConPortPaceMode set to useDefault(2).
PACE mode can be set for the whole stack or for individual ports. When a unit is initialised to factory defaults, prconPortPaceMode for every port is set to useDefault(2), and the actual setting for the port is decided by the value of this object. The manager has the choice, therefore, of varying the mode for every port in the stack, or for individual ports only.
What is prConStackPaceMode?
This INTEGER determines which collision-backoff algorithm ports use—either standard Ethernet or PACE low-latency mode for optimized timing-sensitive traffic. Operators configure this to reduce retransmissions and latency on networks with PACE-compatible devices. For example, setting it to low-latency mode on a port connected to a real-time control system minimizes collisions and response time jitter.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.34.1.2 snmpwalk -v2c -c public <target> A3COM0054-BRASICA2-SPECIFIC::prConStackPaceMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.34.1.2.1 snmpget -v2c -c public <target> A3COM0054-BRASICA2-SPECIFIC::prConStackPaceMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.34.1.2.1 i <value>
Start monitoring 3Com Brasica-platform switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0054-BRASICA2-SPECIFIC::prConStackPaceMode OID value, configure state conditions and alerts, and monitor any 3Com Brasica-platform switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.34 | brasica2 | A3COM0004-GENERIC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.34.1 | stackConfigGroup | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.1.2 | prConStackPaceMode | A3COM0054-BRASICA2-SPECIFIC |