All MIBs › A3COM0054-BRASICA2-SPECIFIC › prConPortStpFastStart
prConPortStpFastStart
Module: A3COM0054-BRASICA2-SPECIFIC
OID (symbolic): A3COM0054-BRASICA2-SPECIFIC::prConPortStpFastStart
OID (numeric): 1.3.6.1.4.1.43.10.34.2.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies whether a switch port will go to the forwarding state immediately if spanning tree is turned on. When this object is set to on(2), the normal intermediate startup states of listening and learning are skipped and the port is allowed to enter the forwarding spanning tree state immediately. This is to allow switch ports that are directly connected to just one endstation to be immediately available when the link is detected or the switch powers up.
Note that this object must be set of off(1) for all switch ports that are connected to ethernet segments or other switches, routers or bridges.
The default state for all ports is off(1).
What is prConPortStpFastStart?
This INTEGER enables fast spanning tree startup, allowing a port to reach forwarding state immediately without the normal listening and learning delays. Engineers enable fast start on edge ports connected to single end-stations to minimize device attachment latency. Setting it to 'on' skips spanning tree handshakes and allows a newly powered-on host to communicate immediately without waiting seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.34.2.1.1.5 snmpwalk -v2c -c public <target> A3COM0054-BRASICA2-SPECIFIC::prConPortStpFastStart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.34.2.1.1.5.1 snmpget -v2c -c public <target> A3COM0054-BRASICA2-SPECIFIC::prConPortStpFastStart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.34.2.1.1.5.1 i <value>
Start monitoring 3Com Brasica-platform switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0054-BRASICA2-SPECIFIC::prConPortStpFastStart OID value, configure state conditions and alerts, and monitor any 3Com Brasica-platform switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.34 | brasica2 | A3COM0004-GENERIC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.34.2 | switchConfigGroup | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.2.1 | prConfigPortTable | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.2.1.1 | prConfigPortEntry | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.2.1.1.5 | prConPortStpFastStart | A3COM0054-BRASICA2-SPECIFIC |