All MIBs › A3COM0054-BRASICA2-SPECIFIC › prConPortFlowCntlDefaultStatus
prConPortFlowCntlDefaultStatus
Module: A3COM0054-BRASICA2-SPECIFIC
OID (symbolic): A3COM0054-BRASICA2-SPECIFIC::prConPortFlowCntlDefaultStatus
OID (numeric): 1.3.6.1.4.1.43.10.34.2.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object represents the administratively-configured full duplex flow control status of the port. If auto-negotiation is not enabled for this port, the value of this object determines the operational full duplex flow control status, and in this case a set to this object will force the port into the specified state.
If auto-negotiation is enabled for this port, the operational status of the port is determined by auto-negotiation and indicated by the value of the prConPortFlowCntlStatus object.
The value of this object denotes the state to which the port will automatically revert should auto-negotiation be disabled.
The value of this object is ignored if the port is operating in half duplex mode.
What is prConPortFlowCntlDefaultStatus?
This read-write INTEGER sets the administratively-configured flow control state, acting as the default if auto-negotiation is disabled. Engineers configure this to ensure flow control matches their network topology and prevent frame loss during congestion. Setting it to 'enabled' forces the port to send pause frames to slow down upstream traffic when its buffer fills.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.34.2.1.1.7 snmpwalk -v2c -c public <target> A3COM0054-BRASICA2-SPECIFIC::prConPortFlowCntlDefaultStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.34.2.1.1.7.1 snmpget -v2c -c public <target> A3COM0054-BRASICA2-SPECIFIC::prConPortFlowCntlDefaultStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.34.2.1.1.7.1 i <value>
Start monitoring 3Com Brasica-platform switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0054-BRASICA2-SPECIFIC::prConPortFlowCntlDefaultStatus OID value, configure state conditions and alerts, and monitor any 3Com Brasica-platform switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.34 | brasica2 | A3COM0004-GENERIC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.34.2 | switchConfigGroup | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.2.1 | prConfigPortTable | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.2.1.1 | prConfigPortEntry | A3COM0054-BRASICA2-SPECIFIC |
| 1.3.6.1.4.1.43.10.34.2.1.1.7 | prConPortFlowCntlDefaultStatus | A3COM0054-BRASICA2-SPECIFIC |