All MIBs › A3COM-HUAWEI-IPX-MIB › h3cIpxIfSplitHorizon
h3cIpxIfSplitHorizon
Module: A3COM-HUAWEI-IPX-MIB
OID (symbolic): A3COM-HUAWEI-IPX-MIB::h3cIpxIfSplitHorizon
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.34.1.2.1.4
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-create
Description: This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable.
What is h3cIpxIfSplitHorizon?
This EnabledStatus controls split-horizon on IPX interfaces to prevent routing loops. When enabled (default), the interface cannot send back packets received on the same interface, avoiding round-trip routing. Disabling it is used only for special point-to-point topologies.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.34 | h3cIpx | A3COM-HUAWEI-IPX-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.34.1 | h3cIpxConfig | A3COM-HUAWEI-IPX-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.34.1.2 | h3cIpxIfConfigTable | A3COM-HUAWEI-IPX-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.34.1.2.1 | h3cIpxIfConfigEntry | A3COM-HUAWEI-IPX-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.34.1.2.1.4 | h3cIpxIfSplitHorizon | A3COM-HUAWEI-IPX-MIB |