-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition 
  
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
-- It contains ZyXEL products OIDs, and common managed objects.

-- $Log: ZYXEL-MULTICAST-MIB.mib $
-- Revision 1.4  2013/12/06 07:07:15  ccho
-- remove uncessary imports
-- Revision 1.3  2012/09/19 07:42:34  Kevin
-- if it's leaf node, revise the vender name from zyxel to zy
-- Revision 1.2  2012/07/05 06:23:47  Kevin
-- 1. upgrade from SNMP to SNMPv2 
-- 2. clean warning
-- Revision 1.1  2012/05/30 07:50:20  Kevin
-- Initial revision

ZYXEL-MULTICAST-MIB DEFINITIONS ::= BEGIN

    IMPORTS
    OBJECT-TYPE, MODULE-IDENTITY
        FROM SNMPv2-SMI
    esMgmt
        FROM ZYXEL-ES-SMI;

	zyxelMulticast MODULE-IDENTITY
	LAST-UPDATED	"201207010000Z"    
	ORGANIZATION "Enterprise Solution ZyXEL"     
	CONTACT-INFO
		""	   
	DESCRIPTION
		"The subtree for multicast"
	::= { esMgmt 54 }
	
	zyxelMulticastSetup     OBJECT IDENTIFIER ::= { zyxelMulticast 1 }

	
  
-- *******************************************************************
-- *
-- * zyxelMulticastSetup
-- *
-- *******************************************************************
       
-- zyxelMulticastUnknownMulticastFrameForwarding
        zyMulticastUnknownMulticastFrameForwarding OBJECT-TYPE
        SYNTAX  INTEGER {
         	flooding(1),
         	drop(2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
			"Specify the action to perform when the switch receives an unknown multicast frame. Unknown multicast 
			frames are addressed to multicast groups for which the Switch has not recorded any group members. 
			Select Drop to discard the frame(s). Select Flooding to send the frame(s) to all ports of the same 
			domain."
        ::= { zyxelMulticastSetup 1 }

-- zyxelMulticastReservedMulticastFrameForwarding
        zyMulticastReservedMulticastFrameForwarding OBJECT-TYPE
        SYNTAX  INTEGER {
         	flooding(1),
         	drop(2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
			"The IP address range of 224.0.0.0 to 224.0.0.255 are reserved for multicasting on the local 
			network only. For example, 224.0.0.1 is for all hosts on a local network segment and 224.0.0.9 is 
			used to send RIP routing information to all RIP v2 routers on the same network segment. A multicast 
			router will not forward a packet with the destination IP address within this range to other networks. 
			See the IANA web site for more information. 
			The layer-2 multicast MAC addresses are also included in this group. 
			Specify the action to perform when the Switch receives a frame with a reserved multicast address. 
			Select Drop to discard the frame(s). Select Flooding to send the frame(s) to all ports of the same domain. "
        ::= { zyxelMulticastSetup 2 }  

 

END