-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition 
  
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
-- It contains ZyXEL products OIDs, and common managed objects.

-- $Log: ZYXEL-DIAGNOSTIC-MIB.mib $ 
-- Revision 1.1  2014/06/03 20:02:35  
-- Initial revision 

ZYXEL-CABLE-DIAGNOSTIC-MIB DEFINITIONS ::= BEGIN

    IMPORTS
  enterprises		FROM RFC1155-SMI  
                             
	OBJECT-TYPE
		FROM SNMPv2-SMI			-- RFC2578	
	ifIndex
    FROM IF-MIB					-- RFC2863
	esMgmt			
		FROM ZYXEL-ES-SMI;

	zyxelCableDiagnostic MODULE-IDENTITY
		LAST-UPDATED	"201406030000Z"    
		ORGANIZATION "Enterprise Solution ZyXEL"     
		CONTACT-INFO
			""	   
		DESCRIPTION
			"The subtree for cable diagnostic"
		::= { esMgmt 96 }

	zyxelCableDiagnosticsStatus OBJECT IDENTIFIER ::= { zyxelCableDiagnostic 1 }
	
	zyxelCableDiagnosticsPortTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF ZyxelCableDiagnosticsPortEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table containing information about cable diagnostic 
        test on the device's interfaces. An entry appears in 
        this table for each interface which is capable to run 
        cable diagnostic test."
    ::= { zyxelCableDiagnosticsStatus 1 }
    
	zyxelCableDiagnosticsResultPortTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF ZyxelCableDiagnosticsResultPortEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table containing information about cable diagnostic 
        test result on the device's interfaces."
    ::= { zyxelCableDiagnosticsStatus 2 }
	
	zyxelCableDiagnosticsPortEntry OBJECT-TYPE
    SYNTAX     ZyxelCableDiagnosticsPortEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "An entry in the zyxelCableDiagnosticsPortTable, containing the information 
        about cable diagnostic test on an interface."
    INDEX      { ifIndex }
    ::= { zyxelCableDiagnosticsPortTable 1 }

	ZyxelCableDiagnosticsPortEntry ::= SEQUENCE {
    zyCableDiagnosticsPortAction
        INTEGER,
    zyCableDiagnosticsPortActionStatus
        INTEGER
    }

	zyCableDiagnosticsPortAction OBJECT-TYPE
    SYNTAX     INTEGER {
    							 none(0),
                   start(1),
                   clear(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Indicates the cable diagnostic test action to be executed on the interface."
            
    ::= { zyxelCableDiagnosticsPortEntry 1 }

	zyCableDiagnosticsPortActionStatus OBJECT-TYPE
    SYNTAX     INTEGER { 
    							 none(0),
    							 success(1),
    							 fail(2),
    							 under-action(3)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Indicates the status of the last cable diagnostic test action set on the interface." 
    ::= { zyxelCableDiagnosticsPortEntry 2 }
    
	zyxelCableDiagnosticsResultPortEntry OBJECT-TYPE
    SYNTAX     ZyxelCableDiagnosticsResultPortEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry in the zyxelCableDiagnosticsResultPortTable, containing 
            the information about cable diagnostic test on an interface."
    INDEX      { ifIndex, zyCableDiagnosticsResultPortPairIndex } 
    ::= { zyxelCableDiagnosticsResultPortTable 1 }
    
	ZyxelCableDiagnosticsResultPortEntry ::= SEQUENCE {
    zyCableDiagnosticsResultPortPairIndex
        INTEGER,
    zyCableDiagnosticsResultPortPairStatus
        INTEGER,
    zyCableDiagnosticsResultPortPairLength
        INTEGER,
    zyCableDiagnosticsResultPortPairDistanceToFault
        INTEGER
    }

	zyCableDiagnosticsResultPortPairIndex OBJECT-TYPE
    SYNTAX     INTEGER {
                         pairA(0),
                         pairB(1),
                         pairC(2),
                         pairD(3) 
               } 
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The pair index."

    REFERENCE 
        "IEEE 802.3-2002: Sections 40.8.1"
    ::= { zyxelCableDiagnosticsResultPortEntry 1 }


	zyCableDiagnosticsResultPortPairStatus OBJECT-TYPE
    SYNTAX     INTEGER {
                   ok(1),
                   open(2),
                   short(3),
                   open-short(4),
                   crosstalk(5),
                   unknown(6),
                   unsupported(7)
               } 
    MAX-ACCESS read-only 
    STATUS     current
    DESCRIPTION
        "The status of the cable pair."
    ::= { zyxelCableDiagnosticsResultPortEntry 2 }	


	zyCableDiagnosticsResultPortPairLength OBJECT-TYPE
    SYNTAX     INTEGER {
                   none(-1),
                   unsupport(-2)
        }
    MAX-ACCESS read-only 
    STATUS     current
    DESCRIPTION
        "The length of the cable pair. A value of -1 indicates 
        the length value is invalid. The unit of this value 
        is centimeter." 
    ::= { zyxelCableDiagnosticsResultPortEntry 3 }

	zyCableDiagnosticsResultPortPairDistanceToFault OBJECT-TYPE
    SYNTAX     INTEGER {
                   none(-1),
                   unsupport(-2)
        }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The distance to the fault point of the cable pair. 
        A value of -1 indicates this value is invalid. 
        The unit of this value is centimeter."
    ::= { zyxelCableDiagnosticsResultPortEntry 4 }       
      
END