ZTE-AN-SERVICE-PORT-MIB DEFINITIONS ::= BEGIN

    IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    RowStatus, DisplayString, TruthValue
        FROM SNMPv2-TC
    ifIndex
        FROM IF-MIB
    zxAnSubIfIndex
        FROM ZTE-AN-IF-MIB
    ZxAnSubIfIndex
        FROM ZTE-AN-TC-MIB
    zxAnServiceProvision
        FROM ZTE-AN-SMI;

    zxAnServicePort MODULE-IDENTITY
        LAST-UPDATED    "201107260000Z"
        ORGANIZATION    "ZTE Corporation"
        CONTACT-INFO    "Wang Yuke     ZTE Corporation
                        Mail: wang.yuke@zte.com.cn
                        Tel : +86-21-68897487"
        DESCRIPTION
            "This MIB defines managed objects of zte service port."
        REVISION        "201107260000Z"
        DESCRIPTION
            "Add multi-variables usage rules for variables of service port
             configuration."
        REVISION        "201105260000Z"
        DESCRIPTION
            "Initial version of this MIB module."
         ::= {zxAnServiceProvision 5}

    zxAnServicePortGlobalObjects   OBJECT IDENTIFIER ::= { zxAnServicePort 1 }
    zxAnServicePortObjects         OBJECT IDENTIFIER ::= { zxAnServicePort 2 }


--------------------------------------------------------------------------------
-- Following objects are defined.
-- 1. Service Port Global Objects
-- 2. Service Port Table
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
-- 1. Service Port Global Objects
--------------------------------------------------------------------------------

    zxAnServicePortCapabilities OBJECT-TYPE
        SYNTAX      BITS {
            supportDoubleTlsVlanTag(0),
            supportTlsCVidInTlsMode(1),
            notSupportQueueId(2),
            supportCosList(3),
            supportExpand(4),
            supportTlsCos(5)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The service port capabilities.
             The bit value 1 means the function represented by this bit is
             supported by this equipment.
             bit 0: value 1 means supporting doubleTlsVlan(13) and 
                    zxAnSrvPortTlsCVid in zxAnSrvPortConfTable.
             bit 1: value 1 means supporting zxAnSrvPortTlsCVid, otherwise 
                    supporting zxAnSrvPortTlsSVid, zxAnSrvPortStagCos in tls(5) 
                    mode.
                    Note: The parameter zxAnSrvPortTlsCVid is supported by the 
                    device when value of supportDoubleTlsVlanTag(0) is 1.
             bit 2: value 1 means not supporting zxAnSrvPortQueueId in 
                    zxAnSrvPortConfTable.
             bit 3: value 1 means supporting zxAnSrvPortCosList and
                    zxAnSrvPortCarThresh in zxAnSrvPortConfTable.
             bit 4: value 1 means supporting zxAnSrvPortUserVidExpandMode,
                    zxAnSrvPortCvidExpandMode, zxAnSrvPortSvidExpandMode and
                    zxAnSrvPortExpandNumber in zxAnSrvPortConfTable.
             bit 5: value 1 means supporting zxAnSrvPortCtagCos in tls(5) mode
                    and supporting zxAnSrvPortCtagCos, zxAnSrvPortStagCos in
                    doubleTlsVlan(13) mode.
             NOTE: No recommended to display it in NMS."
        ::=  { zxAnServicePortGlobalObjects  100 }

--------------------------------------------------------------------------------
-- 2. Service Port Table
--------------------------------------------------------------------------------

    zxAnSrvPortConfTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF ZxAnSrvPortConfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table includes interface service port configuration.
            It uses  in user's traffic scene, a service port indicates
            an user's service,for example VOIP/CATV/POTS/DATA service.
            We can create a service port as the same time finished some
            functions which are QinQ and translate etc."
        ::= { zxAnServicePortObjects 2 }

    zxAnSrvPortConfEntry OBJECT-TYPE
        SYNTAX      ZxAnSrvPortConfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry in zxAnSrvPortConfTable.
            When a manager wants to create a service port,it must comply
            with the multi-variables usage rule that all the mib variables
            related to same function must be in one snmp set operation, the
            variables have two type: mandatory and optional.

            Mandatory variables must be in the one snmp set operation.
            Optional variables may be in the one snmp set operation with the
            mandatory variables, but must not be used alone.

            To create a service port,  there are several cases base on the
            variable zxAnSrvPortServiceMode, and the mandatory and optional
            variables for each case are different.

            Case 1: to create a service port when zxAnSrvPortServiceMode is
            untag(1):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortCVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortSVid,
            zxAnSrvPortCtagCos,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 2: To create a service port when zxAnSrvPortServiceMode is
            untagAndEtype(2):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortUserEthType,
            zxAnSrvPortUserDefinedEthType,
            zxAnSrvPortCVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortSVid,
            zxAnSrvPortCtagCos,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 3: To create a service port when zxAnSrvPortServiceMode is
            cos(3):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortUserCos,
            zxAnSrvPortCVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortSVid,
            zxAnSrvPortCtagCos,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 4: To create a service port when zxAnSrvPortServiceMode is
            tag(4):
            normal config:
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortUserVid,
            zxAnSrvPortCVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortSVid,
            zxAnSrvPortCtagCos,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 5: To create a service port when zxAnSrvPortServiceMode is
            tls(5):
            
            When value of supportTlsCVidInTlsMode(1) is 1:
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortTlsCVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus
            
            When value of supportTlsCVidInTlsMode(1) is 0:
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortTlsSVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortStagCos

            When value of supportTlsCos(5) is 1:
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortTlsCVid,
            zxAnSrvPortRowStatus
            - optional:
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortCtagCos

            Case 6: To create a service port when zxAnSrvPortServiceMode is
            tagAndEtype(6):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortUserVid,
            zxAnSrvPortUserEthType,
            zxAnSrvPortUserDefinedEthType,
            zxAnSrvPortCVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortSVid,
            zxAnSrvPortCtagCos,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 7: To create a service port when zxAnSrvPortServiceMode is
            tagAndCos(7):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortUserVid,
            zxAnSrvPortUserCos,
            zxAnSrvPortCVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortSVid,
            zxAnSrvPortCtagCos,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 8: To create a service port when zxAnSrvPortServiceMode is
            vlanRange(8):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortStartUserVid,
            zxAnSrvPortEndUserVid,
            zxAnSrvPortSVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 9: To create a service port when zxAnSrvPortServiceMode is
            vlanRangeAndEtype(9):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortStartUserVid,
            zxAnSrvPortEndUserVid,
            zxAnSrvPortUserEthType,
            zxAnSrvPortUserDefinedEthType,
            zxAnSrvPortSVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 10: To create a service port when zxAnSrvPortServiceMode is
            vlanRangeAndCos(10):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortStartUserVid,
            zxAnSrvPortEndUserVid,
            zxAnSrvPortUserCos,
            zxAnSrvPortSVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 11: To create a service port when zxAnSrvPortServiceMode is
            batchBindVlan(11):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortStartUserVid,
            zxAnSrvPortEndUserVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 12: To create a service port when zxAnSrvPortServiceMode is
            doubleVlan(12):
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortUserVid,
            zxAnSrvPortUserSVid,
            zxAnSrvPortCVid,
            zxAnSrvPortRowStatus
            - optional :
            zxAnSrvPortSVid,
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortStagCos,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,

            Case 13: To create a service port when zxAnSrvPortServiceMode is
            doubleTlsVlan(13):
            When value of supportTlsCos(1) is 0:
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortTlsSVid,
            zxAnSrvPortTlsCVid,
            zxAnSrvPortRowStatus
            - optional:
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,

            When value of supportTlsCos(1) is 1:
            - mandatoty:
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortTlsSVid,
            zxAnSrvPortTlsCVid,
            zxAnSrvPortRowStatus
            - optional:
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortCtagCos,
            zxAnSrvPortStagCos,

            After an entry is created , only variable zxAnSrvPortDesc and
            zxAnSrvPortAdminStatus can be modified. If a manager tries to
            modify any other variables in this entry,
            agent will return error with snmp error code inconsistentValue.
            "
        INDEX       {ifIndex,zxAnSubIfIndex}
        ::= { zxAnSrvPortConfTable 1 }

    ZxAnSrvPortConfEntry ::= SEQUENCE {
        zxAnSrvPortDesc                          DisplayString,
        zxAnSrvPortAdminStatus                   INTEGER,
        zxAnSrvPortServiceMode                   INTEGER,
        zxAnSrvPortBrgIfId                       Integer32,
        zxAnSrvPortUserVid                       Integer32,
        zxAnSrvPortUserSVid                      Integer32,
        zxAnSrvPortUserCos                       Integer32,
        zxAnSrvPortUserStagCos                   Integer32,
        zxAnSrvPortStartUserVid                  Integer32,
        zxAnSrvPortEndUserVid                    Integer32,
        zxAnSrvPortUserEthType                   INTEGER,
        zxAnSrvPortUserDefinedEthType            DisplayString,
        zxAnSrvPortCVid                          Integer32,
        zxAnSrvPortSVid                          Integer32,
        zxAnSrvPortCtagCos                       Integer32,
        zxAnSrvPortStagCos                       Integer32,
        zxAnSrvPortTlsSVid                       Integer32,
        zxAnSrvPortIngressTrafficPrf             DisplayString,
        zxAnSrvPortEgressTrafficPrf              DisplayString,
        zxAnSrvPortQueueId                       Integer32,
        zxAnSrvPortTlsCVid                       Integer32,
        zxAnSrvPortCosList                       OCTET STRING,
        zxAnSrvPortCarThresh                     INTEGER,
        zxAnSrvPortUserVidExpandMode             INTEGER,
        zxAnSrvPortCvidExpandMode                INTEGER,
        zxAnSrvPortSvidExpandMode                INTEGER,
        zxAnSrvPortExpandNumber                  INTEGER,
        zxAnSrvPortRowStatus                     RowStatus
    }

    zxAnSrvPortDesc OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..64))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "A service port description string."
        DEFVAL      {""}
        ::= {  zxAnSrvPortConfEntry 1 }

    zxAnSrvPortAdminStatus  OBJECT-TYPE
        SYNTAX      INTEGER {
            enabled(1),
            disabled(2)
        }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The administrative state of the service port."
        ::={  zxAnSrvPortConfEntry 2 }

    zxAnSrvPortServiceMode  OBJECT-TYPE
        SYNTAX      INTEGER {
            untag(1),
            untagAndEtype(2),
            cos(3),
            tag(4),
            tls(5),
            tagAndEtype(6),
            tagAndCos(7),
            vlanRange(8),
            vlanRangeAndEtype(9),
            vlanRangeAndCos(10),
            batchBindVlan(11),
            doubleVlan(12),
            doubleTlsVlan(13)
        }
        MAX-ACCESS  read-create
        STATUS    current
        DESCRIPTION
            "A traffic type for a service port. To distinguish specific
            service traffic flow type, the packet information from
            the user-side port is used, and this information is classfied
            to differnet cases that is represented by the value of variable
            zxAnSrvPortServiceMode.
            After distinguishing the service traffic flow type based on the
            packet information, a service port can be created, and additionally
            the packet can be modified if you want.
            For example:
            - translate user-vlan to new cvlan
            - add a svlan
            - modify the svlan when user-side packet is double tagged
            - translate the cos of svlan

            The following is the explanation of each value of variable
            zxAnSrvPortServiceMode.
            - untag(1)
            create a service port when user packet is untag.
            - untagAndEtype(2)
            create a service port when user packet is untag and has a
            specific Ethernet type.
            - cos(3)
            create a service port when user packet is priority tag.
            - tag(4)
            create a service port when user packet is single VLAN tag.
            - tls(5)
            create a service port for a TLS service.
            - tagAndEtype(6)
            create a service port when user packet is single VLAN tag and
            has a specific Ethernet type.
            - tagAndCos(7)
            create a service port when user packet is single VLAN tag and
            has a specific cos.
            - vlanRange(8)
            create a service port for a QinQ service. The user packet will
            add a svlan when the vlan tag is in the vlan range.
            - vlanRangeAndEtype(9)
            create a service port for a QinQ service. The user packet will
            add a svlan when the vlan tag is in the vlan range and has a
            specific ethernet type.
            - vlanRangeAndCos(10)
            create a service port for a QinQ service. The user packet will
            add a svlan when the vlan tag is in the vlan range and has a
            specific cos.
            - batchBindVlan(11)
            create a service port for a transparent service.
            - doubleVlan(12)
            create a service port when user packet is double VLAN tag.
            - doubleTlsVlan(13)
            create a service port for a double tag TLS service.
            "
        DEFVAL      { untag }
        ::={  zxAnSrvPortConfEntry 4 }

    zxAnSrvPortBrgIfId  OBJECT-TYPE
        SYNTAX    Integer32(1..128)
        MAX-ACCESS  read-create
        STATUS    current
        DESCRIPTION
            "Vport index from 1 to 128."
        DEFVAL      { 1 }
        ::={  zxAnSrvPortConfEntry 5 }

    zxAnSrvPortUserVid  OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "User inner VLAN.
             '0' indicates untag."
        DEFVAL      { 0 }
        ::={  zxAnSrvPortConfEntry 8 }

    zxAnSrvPortUserSVid  OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "User inner SVLAN.
             '0' indicates not configured."
        DEFVAL      { 0 }
        ::={  zxAnSrvPortConfEntry 9 }

    zxAnSrvPortUserCos  OBJECT-TYPE
        SYNTAX      Integer32(0..7|255)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "User priority, from 0 to 7.
             '0xFF' indicates not configured."
        DEFVAL      { 255 }
        ::={  zxAnSrvPortConfEntry 10 }

    zxAnSrvPortUserStagCos  OBJECT-TYPE
        SYNTAX      Integer32(0..7|255)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "User SVLAN priority,from 0 to 7.
             '0xFF' indicates not configured."
        DEFVAL      { 255 }
        ::={  zxAnSrvPortConfEntry 11 }

    zxAnSrvPortStartUserVid  OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "User inner start VLAN.
             '0' indicates untag."
        DEFVAL      { 0 }
        ::={  zxAnSrvPortConfEntry 12 }

    zxAnSrvPortEndUserVid  OBJECT-TYPE
        SYNTAX    Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS    current
        DESCRIPTION
            "User inner end vlan.
             '0' indicates untag."
        DEFVAL      { 0 }
        ::={  zxAnSrvPortConfEntry 13 }

    zxAnSrvPortUserEthType  OBJECT-TYPE
        SYNTAX      INTEGER {
            noConfig(1),
            pppoe(2),
            ipoe(3),
            userDefined(4)
        }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "User Ethernet type.
            noConfig(1)   - User ethernet type is not configured.
            pppoe(2)      - User ethernet type is PPPoE.
            ipoe(3)       - User ethernet type is IPoE.
            userDefined(4)- User ethernet type is configured in
                             zxAnSrvPortUserDefinedEthType."
        DEFVAL      { noConfig }
        ::={  zxAnSrvPortConfEntry 14 }

    zxAnSrvPortUserDefinedEthType  OBJECT-TYPE
        SYNTAX      DisplayString(SIZE (0..32))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Specify the user side of ethernet packet type that is defined by
             user.
             When zxAnSrvPortUserEthType is userDefined(4), this object is
             effective.

             Different ethernet packet type is seperated with ','.
             For example: 0x8101,0x8102,0x8848."
        ::={  zxAnSrvPortConfEntry 15 }

    zxAnSrvPortCVid  OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The network side CVLAN.
             '0' indicates not configured."
        DEFVAL      { 0 }
        ::={  zxAnSrvPortConfEntry 18 }

    zxAnSrvPortSVid  OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The network side SVLAN.
             '0' indicates not configured."
        DEFVAL      { 0 }
        ::={  zxAnSrvPortConfEntry 19 }

    zxAnSrvPortCtagCos  OBJECT-TYPE
        SYNTAX      Integer32(0..7|255)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "This object indicates network side CVLAN CoS.
             '0xFF' indicates not configured."
        DEFVAL      { 255 }
        ::={  zxAnSrvPortConfEntry 20 }

    zxAnSrvPortStagCos  OBJECT-TYPE
        SYNTAX      Integer32(0..7 | 255)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "This object indicates network side SVLAN CoS.
             '0xFF' indicates not configured."
        DEFVAL      { 255 }
        ::={  zxAnSrvPortConfEntry 21 }

    zxAnSrvPortTlsSVid  OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "TLS SVLAN.
             When zxAnServicePortServiceMode is tls(5) or doubleTlsVlan(13),
             value 0 indicates untag.
             When zxAnServicePortServiceMode is not tls(5) or doubleTlsVlan(13),
             value 0 indicates not configured."
        DEFVAL      { 0 }
        ::= { zxAnSrvPortConfEntry 22 }

    zxAnSrvPortIngressTrafficPrf OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..32))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Ingress traffic profile.
             The zero length means not configured."
        ::= {  zxAnSrvPortConfEntry 27 }

    zxAnSrvPortEgressTrafficPrf OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..32))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Egress traffic profile.
             The zero length means not configured."
        ::= {  zxAnSrvPortConfEntry 28 }

    zxAnSrvPortQueueId  OBJECT-TYPE
        SYNTAX      Integer32(0..7 | 255)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Service port queue ID.
             Value 0xFF means not configured."
        DEFVAL      { 255 }
        ::= { zxAnSrvPortConfEntry 29 }

    zxAnSrvPortTlsCVid  OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "TLS CVLAN.
             When zxAnServicePortServiceMode is not doubleTlsVlan(13), value 0
             indicates not configured."
        DEFVAL      { 0 }
        ::= { zxAnSrvPortConfEntry 33 }

    zxAnSrvPortCosList OBJECT-TYPE
        SYNTAX      OCTET STRING(SIZE(1))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "CoS list.

             |  bit 0   |  bit 1   |    ...   bit 7   |
             +----------+----------+----...-----------+
             |  CoS 0   |  CoS 1   |    ...   CoS 7   |
             +----------+----------+----...-----------+

             If one bit is set to '1', the corresponding CoS is configured to
             CoS list.
             It is valid when zxAnSrvPortUserCos, zxAnSrvPortUserStagCos,
             zxAnSrvPortCtagCos and zxAnSrvPortStagCos is set to '0xFF'(not
             configured)."
        ::= {  zxAnSrvPortConfEntry 34 }

    zxAnSrvPortCarThresh OBJECT-TYPE
        SYNTAX        INTEGER {
            percent10(1),
            percent25(2),
            percent50(3),
            percent75(4),
            percent100(5)
        }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "CAR (Commit Access Rate) threshold.
             The flow can take x% of the tokens from the token bucket at most.
             When the number of the tokens taken from the token bucket exceeds
             x%, the flow is forbidden to take any tokens.
             For example, percent100 means the flow can take
             tokens once the token bucket is not empty."
        DEFVAL  { percent100 }
        ::= {  zxAnSrvPortConfEntry 35 }

    zxAnSrvPortUserVidExpandMode OBJECT-TYPE
        SYNTAX        INTEGER {
            increment(1),
            decrement(2),
            notConfigured(255)
        }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "User inner VLAN expanding mode."
        DEFVAL  { notConfigured }
        ::= {  zxAnSrvPortConfEntry 41 }

    zxAnSrvPortCvidExpandMode OBJECT-TYPE
        SYNTAX        INTEGER {
            increment(1),
            decrement(2),
            notConfigured(255)
        }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The network side CVLAN expanding mode."
        DEFVAL  { notConfigured }
        ::= {  zxAnSrvPortConfEntry 42 }

    zxAnSrvPortSvidExpandMode OBJECT-TYPE
        SYNTAX        INTEGER {
            increment(1),
            decrement(2),
            notConfigured(255)
        }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The network side SVLAN expanding mode."
        DEFVAL  { notConfigured }
        ::= {  zxAnSrvPortConfEntry 43 }

    zxAnSrvPortExpandNumber OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The number of the expanding rules of the service port.
             '0' indicates not expanding."
        DEFVAL  { 0 }
        ::= {  zxAnSrvPortConfEntry 44 }

    zxAnSrvPortRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.
            The state of this conceptual row only support
            'not exist' and  'active'.
            The action of this conceptual row only support
            'createAndGo' and 'destroy'.

            To create a row in this table, a manager must
            set this object to createAndGo(4), and must comply
            with the multi-variables usage rules in zxAnSrvPortConfEntry
            description.

            To delete a row in this table, a manager must
            set this object to destroy(6).

            To query this object, always return 1. "
        ::= { zxAnSrvPortConfEntry 50 }

    zxAnServicePortConformance   OBJECT IDENTIFIER  ::= { zxAnServicePort 4 }
    zxAnServicePortCompliances  OBJECT IDENTIFIER ::={zxAnServicePortConformance 1}
    zxAnServicePortGroups  OBJECT IDENTIFIER ::= {zxAnServicePortConformance 2 }

    zxAnServicePortBasicCompliances MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION
            "The compliance statement for device support service-port services."
        MODULE -- This Module
            MANDATORY-GROUPS { zxAnServicePortBasicGroup}
        ::= { zxAnServicePortCompliances 1 }

    zxAnServicePortBasicGroup OBJECT-GROUP
        OBJECTS {
            zxAnSrvPortDesc,
            zxAnSrvPortAdminStatus,
            zxAnSrvPortServiceMode,
            zxAnSrvPortBrgIfId,
            zxAnSrvPortUserVid,
            zxAnSrvPortUserSVid,
            zxAnSrvPortUserCos,
            zxAnSrvPortUserStagCos,
            zxAnSrvPortStartUserVid,
            zxAnSrvPortEndUserVid,
            zxAnSrvPortUserEthType,
            zxAnSrvPortUserDefinedEthType,
            zxAnSrvPortCVid,
            zxAnSrvPortSVid,
            zxAnSrvPortCtagCos,
            zxAnSrvPortStagCos,
            zxAnSrvPortTlsSVid,
            zxAnSrvPortIngressTrafficPrf,
            zxAnSrvPortEgressTrafficPrf,
            zxAnSrvPortQueueId,
            zxAnSrvPortTlsCVid,
            zxAnSrvPortCosList,
            zxAnSrvPortCarThresh,
            zxAnSrvPortUserVidExpandMode,
            zxAnSrvPortCvidExpandMode,
            zxAnSrvPortSvidExpandMode,
            zxAnSrvPortExpandNumber,
            zxAnSrvPortRowStatus
        }
        STATUS      current
        DESCRIPTION
            "A collection of objects providing basic service-port
             configuration of management targets."
        ::= { zxAnServicePortGroups 1 }

    zxAnServicePortDescriptGroup OBJECT-GROUP
        OBJECTS {
             zxAnSrvPortDesc
        }
        STATUS      current
        DESCRIPTION
            "A collection of objects descript the exist service-port."
        ::= { zxAnServicePortGroups 2 }
END