ZTE-AN-REMOTE-UNIT-CHANNEL-MIB DEFINITIONS ::= BEGIN

    IMPORTS 
        MODULE-IDENTITY, OBJECT-TYPE, 
        Integer32                           FROM SNMPv2-SMI
        RowStatus                           FROM SNMPv2-TC
        OBJECT-GROUP,MODULE-COMPLIANCE      FROM SNMPv2-CONF           
        ifIndex                             FROM IF-MIB
        zxAnSystem                          FROM ZTE-AN-SMI
        zxAnSubIfIndex                      FROM ZTE-AN-IF-MIB;

    zxAnRemoteUnitChannelMib  MODULE-IDENTITY
        LAST-UPDATED  "201305171651Z"
        ORGANIZATION  "ZTE Corporation"
        CONTACT-INFO  "TongTao ZTE Corporation
                       Mail: tong.tao@zte.com.cn
                       Tel : +86-021-68897257"
        DESCRIPTION   "This MIB defines managed objects of Remote Unit channel."
        REVISION      "201305171651Z"
        DESCRIPTION   "Initial version of this MIB module."
        ::= { zxAnSystem 41 }
    
    zxAnRuGlobalObjects  OBJECT IDENTIFIER ::= {zxAnRemoteUnitChannelMib 1}
    zxAnRuChannelObjects    OBJECT IDENTIFIER ::= { zxAnRemoteUnitChannelMib 2 }

--------------------------------------------------------------------------------
-- Following management objects are defined.
-- 1.  Remote Unit Channel Global Objects
-- 2.  Remote Unit Channel TCP Port Allocation Objects
-- 2.1 Remote Unit Channel TCP Port Allocation Global Ojbects
-- 2.2 Remote Unit Channel TCP Port Allocation Table
-- 3.  zxAnRuChannelConformance
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
-- 1.  Remote Unit Channel Global Objects
--------------------------------------------------------------------------------
    zxAnRuMngGlobalEnable OBJECT-TYPE
        SYNTAX      INTEGER {
                enabled(1),
                disabled(2)
            }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The global switch of remote unit management function.
             enabled(1) means the global switch is on,
             disabled(2) means the global switch is off."
        DEFVAL      { disabled }
        ::= { zxAnRuGlobalObjects 1 }  
    
    zxAnRuMngTransTblAgeTime OBJECT-TYPE
        SYNTAX      Integer32 (30..600)
        UNITS       "seconds" 
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The aging time of remote unit management transition table."
        DEFVAL      { 60 }
        ::= { zxAnRuGlobalObjects 2 }  
    
    zxAnRuFtpAgeTime OBJECT-TYPE
        SYNTAX      Integer32 (1..30)
        UNITS       "minutes" 
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The aging time of remote unit ftp control link."
        DEFVAL      { 5 }
        ::= { zxAnRuGlobalObjects 3 } 
    
    zxAnRuFtpDataAgeTime OBJECT-TYPE
        SYNTAX      Integer32 (5..60)
        UNITS       "seconds" 
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The aging time of remote unit ftp data link."
        DEFVAL      { 5 }
        ::= { zxAnRuGlobalObjects 4 } 
    
    zxAnRuTelnetIdleTimeout OBJECT-TYPE
        SYNTAX      Integer32 (1..1000)
        UNITS       "minutes" 
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The idle timeout of remote unit telnet link."
        DEFVAL      { 3 }
        ::= { zxAnRuGlobalObjects 5 }  
    
    zxAnRuMngVid OBJECT-TYPE
        SYNTAX      Integer32 (1..4094 | 0)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The VLAN ID of the remote unit management interface.
             A value of '0' means that the VLAN ID is not 
             configured."
        DEFVAL      { 0 }
        ::= { zxAnRuGlobalObjects 6 }
    
--------------------------------------------------------------------------------
-- 2.  Remote Unit Channel TCP Port Allocation Objects
--------------------------------------------------------------------------------   

    zxAnRuChannelTcpPortAllocObjects  
                                OBJECT IDENTIFIER ::= { zxAnRuChannelObjects 2 }

--------------------------------------------------------------------------------
-- 2.1 Remote Unit Channel TCP Port Allocation Global Ojbects
--------------------------------------------------------------------------------

    zxAnRuChanTcpPortAllocGlbObjects      
                    OBJECT IDENTIFIER ::= { zxAnRuChannelTcpPortAllocObjects 1 } 

    zxAnRuChannelTcpPortAutoAllocEn  OBJECT-TYPE
        SYNTAX      INTEGER {
            enabled(1),
            disabled(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Enable/disable the remote unit channel TCP port automatic 
             allocation.
             The TCP port used for identifying managed unit will be allocated 
             automatically when zxAnRuChannelTcpPortAutoAllocEn is 
             set to enabled(1)."
        DEFVAL  { disabled }
        ::= { zxAnRuChanTcpPortAllocGlbObjects 1 }

--------------------------------------------------------------------------------
-- 2.2 Remote Unit Channel TCP Port Allocation Table
--------------------------------------------------------------------------------

    zxAnRuChannelTcpPortTable   OBJECT-TYPE
        SYNTAX      SEQUENCE OF ZxAnRuChannelTcpPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "Remote unit channel TCP port allocation table.
             A row in this table can be create or delete only when 
             zxAnRuChannelTcpPortAutoAllocEn is enabled(1)."
        ::= { zxAnRuChannelTcpPortAllocObjects 2 }

    zxAnRuChannelTcpPortEntry   OBJECT-TYPE
        SYNTAX      ZxAnRuChannelTcpPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "An entry of zxAnRuChannelTcpPortTable."
        INDEX
        {
            ifIndex,
            zxAnSubIfIndex,
            zxAnRuChannelTcpPortProtoType
        }
        ::= { zxAnRuChannelTcpPortTable 1 }

    ZxAnRuChannelTcpPortEntry ::= SEQUENCE {
        zxAnRuChannelTcpPortProtoType   INTEGER,
        zxAnRuChannelTcpPortNo          Integer32,
        zxAnRuChannelTcpPortRowStatus   RowStatus
        }

    zxAnRuChannelTcpPortProtoType  OBJECT-TYPE 
        SYNTAX      INTEGER {
            telnet(1),
            http(2)
        }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION     
            "Remote unit channel protocol type.
             There are two types:
             telnet(1) - Manage the remote unit by telnet.
             http(2)   - Manage the remote unit by http."
        ::= { zxAnRuChannelTcpPortEntry 1 }
        
    zxAnRuChannelTcpPortNo  OBJECT-TYPE 
        SYNTAX      Integer32(20000..59999)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION     
            "Remote unit channel TCP port No.."
        ::= { zxAnRuChannelTcpPortEntry 2 }

    zxAnRuChannelTcpPortRowStatus    OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row.
            
            The supported actions of this conceptual row only include:
            'createAndGo' and 'destroy'.

            To create a row in this table, a manager must set this object to 
            createAndGo(4), and must comply with the multi-variables binding 
            rule described in zxAnRuChannelTcpPortEntry.
    
            To delete a row in this table, a manager must set this object to 
            destroy(6). 
             
            To get this object, the agent always returns active(1)."
        ::= { zxAnRuChannelTcpPortEntry 50 }          

--------------------------------------------------------------------------------
-- 3.  zxAnRuChannelConformance
--------------------------------------------------------------------------------

    zxAnRuChannelConformance  OBJECT IDENTIFIER ::= {zxAnRemoteUnitChannelMib 4}

    zxAnRuChannelCompliances  OBJECT IDENTIFIER ::= {zxAnRuChannelConformance 1}
    zxAnRuChannelGroups       OBJECT IDENTIFIER ::= {zxAnRuChannelConformance 2}

    zxAnRuChannelCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
            "The compliance statement for entities which implement the
             ZTE-AN-REMOTE-UNIT-CHANNEL-MIB."
             
        MODULE  -- this module        
            MANDATORY-GROUPS {
                zxAnRuChannelGroup,
                zxAnRuGlobalGroup
            }
        ::= { zxAnRuChannelCompliances 1 }

        
    zxAnRuChannelGroup OBJECT-GROUP
        OBJECTS {
            zxAnRuChannelTcpPortAutoAllocEn,
            zxAnRuChannelTcpPortNo,
            zxAnRuChannelTcpPortRowStatus
        }
        STATUS current
        DESCRIPTION
            "A collection of objects providing remote unit TCP port allocation."
        ::= { zxAnRuChannelGroups 1 }
        
    zxAnRuGlobalGroup OBJECT-GROUP
        OBJECTS {
            zxAnRuMngGlobalEnable,
            zxAnRuMngTransTblAgeTime,
            zxAnRuFtpAgeTime,
            zxAnRuFtpDataAgeTime,
            zxAnRuTelnetIdleTimeout,
            zxAnRuMngVid
        }
        STATUS current
        DESCRIPTION
            "A collection of objects providing remote unit global information."
        ::= { zxAnRuChannelGroups 2 } 
        
END