Wellfleet-OC3-MIB DEFINITIONS ::= BEGIN -- Created 1998 IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfSonetGroup FROM Wellfleet-COMMON-MIB; wfOc3ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOc3ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for the SONET medium table" ::= { wfSonetGroup 12 } wfOc3ConfigEntry OBJECT-TYPE SYNTAX WfOc3ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the medium table" INDEX { wfOc3ConfigIndex } ::= { wfOc3ConfigTable 1 } WfOc3ConfigEntry ::= SEQUENCE { wfOc3ConfigDelete INTEGER, wfOc3ConfigIndex INTEGER, wfOc3ConfigType INTEGER, wfOc3ConfigTimeElapsed INTEGER, wfOc3ConfigValidIntervals INTEGER, wfOc3ConfigLineCoding INTEGER, wfOc3ConfigLineType INTEGER, wfOc3ConfigCircuitIdentifier DisplayString } wfOc3ConfigDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter" DEFVAL { created } ::= { wfOc3ConfigEntry 1 } wfOc3ConfigIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for this physical Sonet interface." ::= { wfOc3ConfigEntry 2 } wfOc3ConfigType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable identifies whether a SONET or a SDH signal is used across this interface." ::= { wfOc3ConfigEntry 3 } wfOc3ConfigTimeElapsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that have elapsed since the beginning of the current error-measurement period." ::= { wfOc3ConfigEntry 4 } wfOc3ConfigValidIntervals OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous intervals for which valid data has been stored." ::= { wfOc3ConfigEntry 5 } wfOc3ConfigLineCoding OBJECT-TYPE SYNTAX INTEGER { other(1), b3zs(2), cmi(3), nrz(4), rz(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable describes the line coding for this interface." DEFVAL { nrz } ::= { wfOc3ConfigEntry 6 } wfOc3ConfigLineType OBJECT-TYPE SYNTAX INTEGER { other(1), shortsinglemode(2), longsinglemode(3), multimode(4), coax(5), utp(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable describes the line type for this interface." DEFVAL { shortsinglemode } ::= { wfOc3ConfigEntry 7 } wfOc3ConfigCircuitIdentifier OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the transmission vendor's circuit identifier." ::= { wfOc3ConfigEntry 8 } END -- Wellfleet-OC3-MIB