--- ArubaOS 6.5.2.0_59123
-- vim:set ts=4 sw=4:
WLSX-HA-MIB DEFINITIONS ::= BEGIN

   IMPORTS
    TEXTUAL-CONVENTION, TDomain, DisplayString, PhysAddress,
    TAddress, TimeInterval, RowStatus, StorageType,
    TestAndIncr, MacAddress, TruthValue
        FROM SNMPv2-TC
    MODULE-IDENTITY, OBJECT-TYPE, snmpModules, Integer32,
    Unsigned32, Counter32, IpAddress, Gauge32,
    NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    OBJECT-GROUP
        FROM SNMPv2-CONF
    wlsxEnterpriseMibModules
        FROM ARUBA-MIB
    ArubaEnableValue, ArubaHaRole, ArubaHaConnectivityStatus
        FROM ARUBA-TC;

   wlsxHaMIB MODULE-IDENTITY 
       LAST-UPDATED "1606072030Z"
       ORGANIZATION "Aruba Wireless Networks"
       CONTACT-INFO
            "Postal:    1322 Crossman Avenue
                        Sunnyvale, CA 94089	
            E-mail:     dl-support@arubanetworks.com
            Phone:      +1 408 227 4500"
       DESCRIPTION
           "This MIB module defines MIB objects which provide 
            information about High Availability on Aruba controller."
       REVISION        "1606072030Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 20 }

   wlsxHighAvalabilityInfoGroup     	OBJECT IDENTIFIER ::= { wlsxHaMIB 1 }
   wlsxHighAvalabilityTraps     	    OBJECT IDENTIFIER ::= { wlsxHaMIB 2 }

-- wlsxHighAvalabilityInfoGroup contains information about the High Availability on Aruba controller

   wlsxHighAvalabilityConfigTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxHighAvalabilityConfigEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists High Avalability configuration on the Aruba controller.
		"
	
      ::= { wlsxHighAvalabilityInfoGroup 1 } 

   wlsxHighAvalabilityConfigEntry OBJECT-TYPE 
	  SYNTAX       WlsxHighAvalabilityConfigEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             " HA profile config entry " 
	  INDEX { haProfileName }
      ::= { wlsxHighAvalabilityConfigTable 1 } 

   WlsxHighAvalabilityConfigEntry ::=
     SEQUENCE {

		haProfileName 					DisplayString,
		haMembership				    DisplayString,
		haState    					    ArubaEnableValue,
		haRole    					    ArubaHaRole,
		haPreemption				    ArubaEnableValue,
		haOversubscription			    ArubaEnableValue,
		haStateSync					    ArubaEnableValue,
		haPresharedKey				    DisplayString,
		haIntercontrollerHbt		    ArubaEnableValue,
		haHbtThreshold					Unsigned32,
		haHbtInterval        			Unsigned32
     }

    haProfileName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..63))
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			The name of the HA profile.
            "
        ::= { wlsxHighAvalabilityConfigEntry 1 }

    haMembership OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..63))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The name of the HA profile enabled.
            "
        ::= { wlsxHighAvalabilityConfigEntry 2 }

    haState OBJECT-TYPE
         SYNTAX       ArubaEnableValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The HA state.
            "
        ::= { wlsxHighAvalabilityConfigEntry 3 }
    haRole OBJECT-TYPE
         SYNTAX       ArubaHaRole
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The HA role of the controller.
            "
        ::= { wlsxHighAvalabilityConfigEntry 4 }

    haPreemption OBJECT-TYPE
         SYNTAX       ArubaEnableValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			HA preemption.
            "
        ::= { wlsxHighAvalabilityConfigEntry 5 }

    haOversubscription OBJECT-TYPE
         SYNTAX       ArubaEnableValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Standby capacity extension.
            "
        ::= { wlsxHighAvalabilityConfigEntry 6 }

    haStateSync OBJECT-TYPE
         SYNTAX       ArubaEnableValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The HA state sync.
            "
        ::= { wlsxHighAvalabilityConfigEntry 7 }

    haPresharedKey OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(8..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The IPSec key for statesync.
            "
        ::= { wlsxHighAvalabilityConfigEntry 8 }

    haIntercontrollerHbt OBJECT-TYPE
         SYNTAX       ArubaEnableValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The state of intercontroller heart beat.
            "
        ::= { wlsxHighAvalabilityConfigEntry 9 }

    haHbtThreshold OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Intercontroller hbt threshold above which it can trigger HA failover.
            "
        ::= { wlsxHighAvalabilityConfigEntry 10 }

    haHbtInterval OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The frequency of inter controller heart beat.
            "
        ::= { wlsxHighAvalabilityConfigEntry 11 }


-- HA AP table --
   wlsxHighAvalabilityApTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxHighAvalabilityApEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists High Avalability AP counts on the Aruba controller.
		"
	
      ::= { wlsxHighAvalabilityInfoGroup 2 } 

   wlsxHighAvalabilityApEntry OBJECT-TYPE 
	  SYNTAX       WlsxHighAvalabilityApEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             " HA AP entry " 
	  INDEX { haProfileName }
      ::= { wlsxHighAvalabilityApTable 1 } 

   WlsxHighAvalabilityApEntry ::=
     SEQUENCE {

		haActiveAPs					Gauge32,
		haStandbyAPs       		    Gauge32,
		haTotalAPs       			Gauge32
     }

    haActiveAPs OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of active APs.
            "
        ::= { wlsxHighAvalabilityApEntry 1 }

    haStandbyAPs OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of standby APs.
            "
        ::= { wlsxHighAvalabilityApEntry 2 }

    haTotalAPs OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of APs.
            "
        ::= { wlsxHighAvalabilityApEntry 3 }


-- HA intercontroller hbt status table --

   wlsxIntercontrollerHbtTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxIntercontrollerHbtEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists inter controller heart beat status.
		"
	
      ::= { wlsxHighAvalabilityInfoGroup 3 } 

   wlsxIntercontrollerHbtEntry OBJECT-TYPE 
	  SYNTAX       WlsxIntercontrollerHbtEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             " HA hbt entry " 
	  INDEX { haActiveCtrl }
      ::= { wlsxIntercontrollerHbtTable 1 } 

   WlsxIntercontrollerHbtEntry ::=
     SEQUENCE {
        haActiveCtrl				DisplayString,
        haActiveCtrlIp				DisplayString,
		haReferenceCnt	  			Gauge32,
		haTotalHbtRequestsSent		Counter32,
		haTotalHbtResponsesRcvd	    Counter32,
		haLastMissedHbtCnt			Gauge32,
		haLastHbtMissedTime			DisplayString
     }

    haActiveCtrl OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			The IP address of the actve controller(Key).
            "
        ::= { wlsxIntercontrollerHbtEntry 1 }

    haActiveCtrlIp OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The IP address of the actve controller.
            "
        ::= { wlsxIntercontrollerHbtEntry 2 }


    haReferenceCnt OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of standby APs.
            "
        ::= { wlsxIntercontrollerHbtEntry 3 }

    haTotalHbtRequestsSent OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of hbt requests sent.
            "
        ::= { wlsxIntercontrollerHbtEntry 4 }

    haTotalHbtResponsesRcvd OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of heart beat responses received.
            "
        ::= { wlsxIntercontrollerHbtEntry 5 }

    haLastMissedHbtCnt OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of heart beat last missed.
            "
        ::= { wlsxIntercontrollerHbtEntry 6 }

    haLastHbtMissedTime OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The timestamp of last missed hbt.
            "
        ::= { wlsxIntercontrollerHbtEntry 7 }


-- State sync table --

   wlsxStateSyncTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxStateSyncEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
        "
            This Table lists the counts of active/replicated pmk-cache and 
            key-cache entries related to HA state sync.
        "
	
      ::= { wlsxHighAvalabilityInfoGroup 4 } 

   wlsxStateSyncEntry OBJECT-TYPE 
	  SYNTAX       WlsxStateSyncEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             " HA state sync entry " 
	  INDEX { haProfileName }
      ::= { wlsxStateSyncTable 1 } 

   WlsxStateSyncEntry ::=
     SEQUENCE {

		haActivePmkCacheEntries  		Gauge32,
		haReplicatedPmkCacheEntries  	Gauge32,
		haTotalPmkCacheEntries  		Gauge32,
		haActiveKeyCacheEntries 	 	Gauge32,
		haReplicatedKeyCacheEntries 	Gauge32,
		haTotalKeyCacheEntries  		Gauge32
     }

    haActivePmkCacheEntries OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of active pmk cache entries.
            "
        ::= { wlsxStateSyncEntry 1 }


    haReplicatedPmkCacheEntries OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of replicated pmk cache entries.
            "
        ::= { wlsxStateSyncEntry 2 }

    haTotalPmkCacheEntries OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of pmk cache entries.
            "
        ::= { wlsxStateSyncEntry 3 }

    haActiveKeyCacheEntries OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of active key cache entries.
            "
        ::= { wlsxStateSyncEntry 4 }

    haReplicatedKeyCacheEntries OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The nuber of replicated key cache entries.
            "
        ::= { wlsxStateSyncEntry 5 }

    haTotalKeyCacheEntries OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of key cache entries.
            "
        ::= { wlsxStateSyncEntry 6 }


-- HA tunnel table --

   wlsxHighAvalabilityTunnelTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxHighAvalabilityTunnelEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
        "
            This table lists the total number of High Availability acitve/standby tunnels
            and AP heart beat tunnels on the Aruba controller.
        "
	
      ::= { wlsxHighAvalabilityInfoGroup 5 } 

   wlsxHighAvalabilityTunnelEntry OBJECT-TYPE 
	  SYNTAX       WlsxHighAvalabilityTunnelEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             " HA tunnel entry " 
	  INDEX { haProfileName }
      ::= { wlsxHighAvalabilityTunnelTable 1 } 

   WlsxHighAvalabilityTunnelEntry ::=
     SEQUENCE {

		haActiveVapTunnels				Gauge32,
		haStandbyVapTunnels  			Gauge32,
		haTotalVapTunnels      			Gauge32,
		haAPHbtTunnels	 				Gauge32
     }

    haActiveVapTunnels OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of active per VAP GRE tunnels.
            "
        ::= { wlsxHighAvalabilityTunnelEntry 1 }

    haStandbyVapTunnels OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of standby per VAP GRE tunnels.
            "
        ::= { wlsxHighAvalabilityTunnelEntry 2 }

    haTotalVapTunnels OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The total number of per VAP GRE tunnels.
            "
        ::= { wlsxHighAvalabilityTunnelEntry 3 }

    haAPHbtTunnels OBJECT-TYPE
         SYNTAX       Gauge32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The number of AP hbt GRE tunnels.
            "
        ::= { wlsxHighAvalabilityTunnelEntry 4 }

-- High Availability Traps
-- This group defines all the traps related to High Availability. 
wlsxHaTrapObjectsGroup      OBJECT IDENTIFIER ::= { wlsxHighAvalabilityTraps 1 }
wlsxHaTrapDefinitionGroup   OBJECT IDENTIFIER ::= { wlsxHighAvalabilityTraps 2 }

    wlsxHaV4Status OBJECT-TYPE
         SYNTAX       ArubaEnableValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 This object is used in the traps to indicate the
             IPv4 status of High Availability.
            "
        ::= { wlsxHaTrapObjectsGroup 1 }
    wlsxHaV4Role OBJECT-TYPE
         SYNTAX       ArubaHaRole
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This object is used in the traps to indicate the
            IPv4 HA role of the controller.
            "
        ::= { wlsxHaTrapObjectsGroup 2 }

    wlsxHaV6Status OBJECT-TYPE
         SYNTAX       ArubaEnableValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This object is used in the traps to indicate the
            IPv6 status of High Availability.
            "
        ::= { wlsxHaTrapObjectsGroup 3 }

    wlsxHaV6Role OBJECT-TYPE
         SYNTAX       ArubaHaRole
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This object is used in the traps to indicate the
            IPv6 HA role of the controller.
            "
        ::=  { wlsxHaTrapObjectsGroup 4 }

    wlsxHaAPName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..63))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This object is used in the traps to indicate name of an AP.
            "
        ::= { wlsxHaTrapObjectsGroup 5 }


    wlsxHaActiveControllerIp OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..63))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This object is used in the traps to indicate the active controller IP address.
            "
        ::= { wlsxHaTrapObjectsGroup 6 }

    wlsxHaStandbyControllerIp OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..63))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This object is used in the traps to indicate the standby controller IP address.
            "
        ::= { wlsxHaTrapObjectsGroup 7 }

     wlsxTrapHaConnectivityStatus OBJECT-TYPE
         SYNTAX       ArubaHaConnectivityStatus
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            This object is used in the traps to indicate standby controller connectivity status
            of an AP.
            "
        ::=  { wlsxHaTrapObjectsGroup 8 }

     wlsxTrapHaIntercontrollerHbtMissCnt OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            This object is used in the traps to indicate the number of intercontroller heart beat miss. 
            "
        ::=  { wlsxHaTrapObjectsGroup 9 }

     wlsxTrapHaHbtMissTimeStamp OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..63))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            This object is used in the traps to indicate the time stamp of 
            intercontroller heart beat miss. 
            "
        ::=  { wlsxHaTrapObjectsGroup 10 }

      wlsxTrapHaStandbyApCnt OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            This object is used in the traps to indicate the number of standby APs on standby controller.
            "
        ::=  { wlsxHaTrapObjectsGroup 11 }


--Trap Definition
         wlsxHaState  NOTIFICATION-TYPE
         OBJECTS {wlsxHaV4Status, wlsxHaV4Role, wlsxHaV6Status, wlsxHaV6Role}
         STATUS  current
         DESCRIPTION
            "This trap indicates that HA state has changed."
         ::= { wlsxHaTrapDefinitionGroup 1 }

         wlsxHaStandbyIpSentFailed  NOTIFICATION-TYPE
         OBJECTS {wlsxHaStandbyControllerIp, wlsxHaAPName}
         STATUS  current
         DESCRIPTION
            "This trap indicates that standby IP is sent to an AP failed"
         ::= { wlsxHaTrapDefinitionGroup 2 }

         wlsxHaStandbyConnectivityState  NOTIFICATION-TYPE
         OBJECTS {wlsxHaAPName, wlsxHaStandbyControllerIp, wlsxTrapHaConnectivityStatus}
         STATUS  current
         DESCRIPTION
            "This trap indicates the standby connectivity status for an AP."
         ::= { wlsxHaTrapDefinitionGroup 3 }

         wlsxHaIntercontrollerHbtMiss  NOTIFICATION-TYPE
         OBJECTS {wlsxTrapHaIntercontrollerHbtMissCnt, wlsxHaActiveControllerIp, wlsxTrapHaHbtMissTimeStamp}
         STATUS  current
         DESCRIPTION
            "This trap indicates around half of the threshold intercontroller hearbeat 
             missed with serving controller.
            "
         ::= { wlsxHaTrapDefinitionGroup 4 }

         wlsxHaFailoverTrigger  NOTIFICATION-TYPE
         OBJECTS {wlsxHaActiveControllerIp, wlsxTrapHaStandbyApCnt}
         STATUS  current
         DESCRIPTION
            "This trap indicates that standby controller has triggered HA failover to aps belonging to a
            particular serving controller with which intercontroller heart beat missed above threshold."

         ::= { wlsxHaTrapDefinitionGroup 5 }

          wlsxHaFailoverRequestFromAp NOTIFICATION-TYPE
         OBJECTS {wlsxHaAPName}
         STATUS  current
         DESCRIPTION
            "This trap indicates that an ap sent failover request to the controller.
             This could be because of AP missing hbt with serving controller, on receiving failover 
             request from standby controller or AP trying to preempt back to active controller"
         ::= { wlsxHaTrapDefinitionGroup 6 }
END