WILAN-120-58-MIB DEFINITIONS ::= BEGIN -- TITLE: Wi-LAN AWE 120-58 MIB Version 1 IMPORTS OBJECT-TYPE, IpAddress FROM SNMPv2-SMI enterprises, Counter, Gauge FROM RFC1155-SMI DisplayString, PhysAddress FROM RFC1213-MIB; wilan OBJECT IDENTIFIER ::= { enterprises 2686 } awe120-58 OBJECT IDENTIFIER ::= { wilan 2 } -- Groups in the Wi-LAN AWE 120-58 MIB -- 120-58 Configuration Group config OBJECT IDENTIFIER ::= { awe120-58 1 } serialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Unit Serial Number" ::= { config 1 } productionDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Unit Date of Manufacture" ::= { config 2 } macAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet MAC address" ::= { config 3 } systemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "System Name" ::= { config 4 } unitLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Unit Location" ::= { config 5 } contactName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Contact Name" ::= { config 6 } config7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 7 } config8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 8 } config9 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 9 } ipAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Internet IP Address" ::= { config 10 } ipNewAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet IP Address" ::= { config 11 } ipSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Subnet Mask" ::= { config 12 } ipGatewayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Default Gateway Address (currently unused)" ::= { config 13 } ipNetmanAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Network Management Station IP Address" ::= { config 14 } ipPacketFiltering OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Packet Filtering: Disabled, Enabled" ::= { config 15 } ipAddressFiltering OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address Filtering: Disabled, Enabled" ::= { config 16 } ipFilter1Range OBJECT-TYPE SYNTAX INTEGER ( 0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address Filter 1 Range" ::= { config 17 } ipFilter1Base OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter 1 Base Address" ::= { config 18 } ipFilter2Range OBJECT-TYPE SYNTAX INTEGER ( 0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address Filter 2 Range" ::= { config 19 } ipFilter2Base OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter 2 Base Address" ::= { config 20 } ipFilter3Range OBJECT-TYPE SYNTAX INTEGER ( 0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address Filter 3 Range" ::= { config 21 } ipFilter3Base OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter 3 Base Address" ::= { config 22 } ipFilter4Range OBJECT-TYPE SYNTAX INTEGER ( 0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address Filter 4 Range" ::= { config 23 } ipFilter4Base OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter 4 Base Address" ::= { config 24 } ipFilter5Range OBJECT-TYPE SYNTAX INTEGER ( 0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address Filter 5 Range" ::= { config 25 } ipFilter5Base OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Filter 5 Base Address" ::= { config 26 } macFilterEntryAge OBJECT-TYPE SYNTAX INTEGER ( 1..60 ) MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Filter Entry Age Time Minutes (1-60)" ::= { config 27 } config28 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 28 } config29 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 29 } stationType OBJECT-TYPE SYNTAX INTEGER { remote(0), base-stn(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Station Type" ::= { config 30 } stationRank OBJECT-TYPE SYNTAX INTEGER ( 1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Station RF Rank" ::= { config 31 } centerFreq OBJECT-TYPE SYNTAX INTEGER ( 57410..58338 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Center Frequency (57410 - 58338)" ::= { config 32 } securityWord1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Security Password 1" ::= { config 33 } securityWord2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Security Password 2" ::= { config 34 } securityWord3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Security Password 3" ::= { config 35 } securityWord4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Security Password 4" ::= { config 36 } securityWord5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Security Password 5" ::= { config 37 } scramblingCode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Scrambling Code Word" ::= { config 38 } acquisitionCode OBJECT-TYPE SYNTAX INTEGER ( 0..15 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Acquisition Code" ::= { config 39 } configMinutes OBJECT-TYPE SYNTAX INTEGER ( 1..120 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Configuration Test Minutes" ::= { config 40 } repeaterMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Base Station Repeater Mode (Disabled, Enabled)" ::= { config 41 } systemType OBJECT-TYPE SYNTAX INTEGER { asymmetric(0), symmetric(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Base Station Symmetry Type (Asymmetric, Symmetric)" ::= { config 42 } remoteGroup OBJECT-TYPE SYNTAX INTEGER ( 0..63 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Group Identifier" ::= { config 43 } numOfPollRounds OBJECT-TYPE SYNTAX INTEGER ( 1..60 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Current Number of Polling Rounds (1-60)" ::= { config 44 } txPwrLevelAdj OBJECT-TYPE SYNTAX INTEGER { dB0(31), dB-1(30), dB-2(29), dB-3(28), dB-4(27), dB-5(26), dB-6(25), dB-7(24), dB-8(23), dB-9(22), dB-10(21), dB-11(20), dB-12(19), dB-13(18), dB-14(17), dB-15(16), dB-16(15), dB-17(14), dB-18(13), dB-19(12), dB-20(11), dB-21(10), dB-22(9), dB-23(8), dB-24(7), dB-25(6), dB-26(5), dB-27(4), dB-28(3), dB-29(2), dB-30(1), dB-31(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Tx Power Level Adjust (-31 to 0) dB" ::= { config 45 } defStationType OBJECT-TYPE SYNTAX INTEGER { remote(0), base-stn(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Default Station Type" ::= { config 46 } defStationRank OBJECT-TYPE SYNTAX INTEGER ( 1..1000 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Default Station RF Rank" ::= { config 47 } defCenterFreq OBJECT-TYPE SYNTAX INTEGER ( 57410..58338 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Center Frequency (57410 - 58338)" ::= { config 48 } defSecurityWord1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Security Password 1" ::= { config 49 } defSecurityWord2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Security Password 2" ::= { config 50 } defSecurityWord3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Security Password 3" ::= { config 51 } defSecurityWord4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Security Password 4" ::= { config 52 } defSecurityWord5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Security Password 5" ::= { config 53 } defScramblingCode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Scrambling Code Word" ::= { config 54 } defAcquisitionCode OBJECT-TYPE SYNTAX INTEGER ( 0..15 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Acquisition Code" ::= { config 55 } defConfigMinutes OBJECT-TYPE SYNTAX INTEGER ( 1..120 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Configuration Test Minutes" ::= { config 56 } defRepeaterMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Default Base Station Repeater Mode (Disabled, Enabled)" ::= { config 57 } defSystemType OBJECT-TYPE SYNTAX INTEGER { asymmetric(0), symmetric(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Default Base Station Symmetry Type (Asymmetric, Symmetric)" ::= { config 58 } defRemoteGroup OBJECT-TYPE SYNTAX INTEGER ( 0..63 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Group Identifier" ::= { config 59 } defNumOfPollRounds OBJECT-TYPE SYNTAX INTEGER ( 1..60 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Default Number of Polling Rounds (1-60)" ::= { config 60 } defTxPwrLevelAdj OBJECT-TYPE SYNTAX INTEGER { dB0(31), dB-1(30), dB-2(29), dB-3(28), dB-4(27), dB-5(26), dB-6(25), dB-7(24), dB-8(23), dB-9(22), dB-10(21), dB-11(20), dB-12(19), dB-13(18), dB-14(17), dB-15(16), dB-16(15), dB-17(14), dB-18(13), dB-19(12), dB-20(11), dB-21(10), dB-22(9), dB-23(8), dB-24(7), dB-25(6), dB-26(5), dB-27(4), dB-28(3), dB-29(2), dB-30(1), dB-31(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Default RF Tx Power Level Adjust (-31 to 0) dB" ::= { config 61 } newStationType OBJECT-TYPE SYNTAX INTEGER { remote(0), base-stn(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "New Station Type" ::= { config 62 } newStationRank OBJECT-TYPE SYNTAX INTEGER ( 1..1000 ) MAX-ACCESS read-write STATUS current DESCRIPTION "New Station RF Rank" ::= { config 63 } newCenterFreq OBJECT-TYPE SYNTAX INTEGER ( 57410..58338 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Current RF Center Frequency (57410 - 58338)" ::= { config 64 } newSecurityWord1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Security Password 1" ::= { config 65 } newSecurityWord2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Security Password 2" ::= { config 66 } newSecurityWord3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Security Password 3" ::= { config 67 } newSecurityWord4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Security Password 4" ::= { config 68 } newSecurityWord5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Security Password 5" ::= { config 69 } newScramblingCode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Scrambling Code Word" ::= { config 70 } newAcquisitionCode OBJECT-TYPE SYNTAX INTEGER ( 0..15 ) MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Acquisition Code" ::= { config 71 } newConfigMinutes OBJECT-TYPE SYNTAX INTEGER ( 1..120 ) MAX-ACCESS read-write STATUS current DESCRIPTION "RF New Configuration Test Minutes" ::= { config 72 } newRepeaterMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "New Base Station Repeater Mode (Disabled, Enabled)" ::= { config 73 } newSystemType OBJECT-TYPE SYNTAX INTEGER { asymmetric(0), symmetric(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "New Base Station Symmetry Type (Asymmetric, Symmetric)" ::= { config 74 } newRemoteGroup OBJECT-TYPE SYNTAX INTEGER ( 0..63 ) MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Group Identifier" ::= { config 75 } newNumOfPollRounds OBJECT-TYPE SYNTAX INTEGER ( 1..60 ) MAX-ACCESS read-write STATUS current DESCRIPTION "New Number of Polling Rounds (1-60)" ::= { config 76 } newTxPwrLevelAdj OBJECT-TYPE SYNTAX INTEGER { dB0(31), dB-1(30), dB-2(29), dB-3(28), dB-4(27), dB-5(26), dB-6(25), dB-7(24), dB-8(23), dB-9(22), dB-10(21), dB-11(20), dB-12(19), dB-13(18), dB-14(17), dB-15(16), dB-16(15), dB-17(14), dB-18(13), dB-19(12), dB-20(11), dB-21(10), dB-22(9), dB-23(8), dB-24(7), dB-25(6), dB-26(5), dB-27(4), dB-28(3), dB-29(2), dB-30(1), dB-31(0) } MAX-ACCESS read-write STATUS current DESCRIPTION "New RF Tx Power Level Adjust (-31 to 0) dB" ::= { config 77 } stationMode OBJECT-TYPE SYNTAX INTEGER { normal(0), rx-test(1), tx-test(2), rssi-test(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operating Mode (Normal, Rx-Test, Tx-Test, RSSI-Test)" ::= { config 78 } rfTransmitStatus OBJECT-TYPE SYNTAX INTEGER { blocked(0), unblocked(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RF Transmit Status (Blocked, Unblocked)" ::= { config 79 } linkMonitorPeriod OBJECT-TYPE SYNTAX INTEGER ( 0..10000 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Link Monitor Period (0=OFF, 1-10000)" ::= { config 80 } testModeTimer OBJECT-TYPE SYNTAX INTEGER ( 0..1000 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Test Mode Timer Minutes (0=OFF, 1-1000)" ::= { config 81 } remoteDistance OBJECT-TYPE SYNTAX INTEGER { km05(1), km10(2), km15(3), km20(4), km25(5), km30(6), km35(7), km40(8), km45(9), km50(10), km55(11), km60(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Remote Distance" ::= { config 82 } linkMonitorRank OBJECT-TYPE SYNTAX INTEGER ( 1..1000 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Link Monitor Remote Station Rank (1-1000)" ::= { config 83 } throttleEnable OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Throttling Enable" ::= { config 84 } throttleLevel OBJECT-TYPE SYNTAX INTEGER ( 1..50 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Throttle Level (1-50)" ::= { config 85 } config86 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 86 } config87 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 87 } config88 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 88 } config89 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 89 } communityName1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Read-Only Access Community Name" ::= { config 90 } communityName2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Read-Write Access Community Name" ::= { config 91 } ethernetAccess OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Access to Local Host" ::= { config 92 } wirelessAccess OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Access to Local Host" ::= { config 93 } config94 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 94 } currentImage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current System Image File Name" ::= { config 95 } defaultImage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Select Specified System Image As Default" ::= { config 96 } prevDefaultImage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Previous Default System Image File Name" ::= { config 97 } config98 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 98 } config99 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 99 } -- The System Image List systemImageList OBJECT-TYPE SYNTAX SEQUENCE OF SystemImageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "System Image List" ::= { config 100 } systemImageEntry OBJECT-TYPE SYNTAX SystemImageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "System Image List Entry" INDEX { systemImageNumber } ::= { systemImageList 1 } SystemImageEntry ::= SEQUENCE { systemImageNumber INTEGER, systemImageName DisplayString (SIZE (0..15)), systemImageRevn DisplayString (SIZE (0..15)), systemImageDate DisplayString (SIZE (0..15)), systemImageTime DisplayString (SIZE (0..15)), systemImageRevn DisplayString (SIZE (0..15)), systemImageSize INTEGER, systemImageText DisplayString (SIZE (0..15)) } systemImageNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "System Image Number" ::= { systemImageEntry 1 } systemImageName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "System Image File Name" ::= { systemImageEntry 2 } systemImageRevn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "System Image Revision Identifier" ::= { systemImageEntry 3 } systemImageDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "System Image File Date" ::= { systemImageEntry 4 } systemImageTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "System Image File Time" ::= { systemImageEntry 5 } systemImageSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "System Image File Size" ::= { systemImageEntry 6 } systemImageText OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "System Image Descriptive Text" ::= { systemImageEntry 7 } -- The Remote Unit Configuration Table -- remoteTable OBJECT-TYPE -- SYNTAX SEQUENCE OF RemoteEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "Remote Unit Configuration Table." -- ::= { config 101 } -- remoteEntry OBJECT-TYPE -- SYNTAX RemoteEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "Remote Unit Configuration Table Entry" -- INDEX { remoteNumber } -- ::= { remoteTable 1 } -- RemoteEntry ::= -- SEQUENCE { -- remoteNumber -- INTEGER, -- remotePrio -- INTEGER, -- remoteUnits -- INTEGER -- } -- remoteNumber OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Remote Unit Station Id" -- ::= { remoteEntry 1 } -- remotePrio OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Remote Unit Polling Priority" -- ::= { remoteEntry 2 } -- remoteUnits OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Currently Undefined" -- ::= { remoteEntry 3 } config101 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 101 } config102 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 102 } config103 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 103 } config104 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Spare" ::= { config 104 } -- System Status status OBJECT IDENTIFIER ::= { awe120-58 2 } totalHours OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Cumulative Run-Time Hours" ::= { status 1 } systemHours OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Current Run-Time Hours Since Powerup" ::= { status 2 } loginOkays OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Successful Logins" ::= { status 3 } loginFails OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Unsuccessful Login Attempts" ::= { status 4 } localUser OBJECT-TYPE SYNTAX INTEGER { none(0), user(1), supervisor(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local User Login Status" ::= { status 5 } telnetUser OBJECT-TYPE SYNTAX INTEGER { none(0), user(1), supervisor(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Telnet User Login Status" ::= { status 6 } ftpUser OBJECT-TYPE SYNTAX INTEGER { none(0), user(1), supervisor(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "FTP User Login Status" ::= { status 7 } -- Statistics statistics OBJECT IDENTIFIER ::= { awe120-58 3 } etherRxTotalPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Total Ethernet Packets Received" ::= { statistics 1 } etherRxLocalPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Packets Received For Local Host" ::= { statistics 2 } etherRxErrorPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Receive Error Packets" ::= { statistics 3 } etherRxDroppedPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Receive Packets Dropped" ::= { statistics 4 } etherRxDiscardPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Receive Packets Discarded" ::= { statistics 5 } etherRxTotalKbytes OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Total Ethernet KBytes Received Since Last Reset" ::= { statistics 6 } etherRxBcastKbytes OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Broadcast KBytes Received Since Last Reset" ::= { statistics 7 } etherTxTotalPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Total Ethernet Packets Transmitted" ::= { statistics 8 } etherTxDroppedPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Transmit Packets Dropped" ::= { statistics 9 } etherTxTotalKbytes OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Total Ethernet KBytes Transmitted Since Last Reset" ::= { statistics 10 } etherTxBcastKbytes OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Broadcast KBytes Transmitted Since Last Reset" ::= { statistics 11 } rfRxTotalPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Total RF Receive Packets" ::= { statistics 12 } rfRxLocalPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Packets Received For Local Host" ::= { statistics 13 } rfRxDroppedPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Receive Packets Dropped" ::= { statistics 14 } rfRxDiscardedPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Receive Packets Discarded" ::= { statistics 15 } rfTxTotalPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Total RF Transmitted Packets" ::= { statistics 16 } rfTxLocalPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Local Transmit Packets" ::= { statistics 17 } rfTxDroppedPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Transmit Packets Dropped" ::= { statistics 18 } rfRxSframeCount OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Total RF Super Frames Received" ::= { statistics 19 } rfRxOverrunErrors OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Overrun Errors" ::= { statistics 20 } rfRxSFrameErrors OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Super Frame Control Word Errors" ::= { statistics 21 } rfRxChecksumErrors OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Super Frame Header Checksum Errors" ::= { statistics 22 } rfRxPacketErrors OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Packet Control Word Errors" ::= { statistics 23 } rfRxLengthErrors OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Super Frame Length Errors" ::= { statistics 24 } rfTxSuperFrameCnt OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF Super Frames Transmitted" ::= { statistics 25 } rfEtoIThroughput OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet to RF Throughput in bits/s" ::= { statistics 26 } rfItoEThroughput OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "RF to Ethernet Throughput in bits/s" ::= { statistics 27 } statistics24 OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Spare" ::= { statistics 28 } linkMonitorRank1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Link Monitor Remote Station Rank" ::= { statistics 29 } linkMonRtoBber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Link Monitor Remote To Base BER" ::= { statistics 30 } linkMonBtoRber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Link Monitor Base to Remote BER" ::= { statistics 31 } linkMonMissPktCnt OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current DESCRIPTION "Link Monitor Missed Packet Count" ::= { statistics 32 } linkMonEnvPBtoR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Link Monitor Base to Remote Envelope Power" ::= { statistics 33 } linkMonEnvPRtoB OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Link Monitor Remote to Base Envelope Power" ::= { statistics 34 } linkMonCorrPBtoR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Link Monitor Base to Remote Correlation Power" ::= { statistics 35 } linkMonCorrPRtoB OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Link Monitor Remote to Base Correlation Power" ::= { statistics 36 } -- System Commands commands OBJECT IDENTIFIER ::= { awe120-58 4 } rebootCurrent OBJECT-TYPE SYNTAX INTEGER { reboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reboot Current System Image" ::= { commands 1 } rebootImage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Reboot Specified System Image" ::= { commands 2 } rebootNewRfConfig OBJECT-TYPE SYNTAX INTEGER { reboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reboot New RF Configuration" ::= { commands 3 } restFactConfReboot OBJECT-TYPE SYNTAX INTEGER { restore(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Restore Factory Configuration and Reboot" ::= { commands 4 } saveConfToFlash OBJECT-TYPE SYNTAX INTEGER { save(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Save Current Configuration To Flash" ::= { commands 5 } resetRadioStats OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset Radio Statistics" ::= { commands 6 } resetEthernetStats OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset Ethernet Statistics" ::= { commands 7 } END