-- ***************************************************************************** -- Unisphere-Data-DS1-MIB -- -- Unisphere Networks Enterprise MIB -- DS1/E1 MIB -- -- Copyright (c) 1998, 1999 Redstone Communications, Incorporated. -- Copyright (c) 1999, 2002 Unisphere Networks, Incorporated. -- All Rights Reserved. -- ***************************************************************************** Unisphere-Data-DS1-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex, InterfaceIndexOrZero FROM IF-MIB usDataMibs FROM Unisphere-Data-MIBs UsdTimeSlotMap, UsdNextIfIndex FROM Unisphere-Data-TC; usdDs1MIB MODULE-IDENTITY LAST-UPDATED "200205131601Z" -- 13-May-02 12:01 PM EDT ORGANIZATION "Unisphere Networks, Inc." CONTACT-INFO " Unisphere Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886 USA Tel: +1 978 589 5800 Email: mib@UnisphereNetworks.com" DESCRIPTION "The DS1/E1 MIB for the Unisphere enterprise. This MIB contains managed objects to supplement those found in RFC1406 DS1/E1 MIB." -- Revision History REVISION "200205131601Z" -- 13-May-02 12:01 PM EDT - RX 4.0 DESCRIPTION "Added support for FDL." REVISION "200107311825Z" -- 31-Jul-01 02:25 PM EDT - RX 3.2 DESCRIPTION "Change access on usdDsx1Ds1ChannelNumber." REVISION "200104041805Z" -- 04-Apr-01 02:05 PM EDT - RX 3.0 DESCRIPTION "Added dynamic DS1 interface support." REVISION "9906170000Z" -- 17-Jun-99 - RX 1.1 DESCRIPTION "Updated version of this MIB module." REVISION "9811130000Z" -- 13-Nov-98 - RX 1.0 DESCRIPTION "Initial version of this MIB module." ::= { usDataMibs 5 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Textual conventions -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No textual conventions are defined in this MIB -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ usdDs1Objects OBJECT IDENTIFIER ::= { usdDs1MIB 1 } -- ///////////////////////////////////////////////////////////////////////////// -- -- DS1 Interfaces -- -- ///////////////////////////////////////////////////////////////////////////// -- -- The DS1 Configuration Table -- usdDsx1ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF UsdDsx1ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for DS1/E1 interfaces present in the system." ::= { usdDs1Objects 1 } usdDsx1ConfigEntry OBJECT-TYPE SYNTAX UsdDsx1ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an DS1/E1 interface." INDEX { ifIndex } ::= { usdDsx1ConfigTable 1 } UsdDsx1ConfigEntry ::= SEQUENCE { usdDsx1TimeSlotMap UsdTimeSlotMap, usdDsx1Ds1ChannelNumber Integer32, usdDsx1Capabilities Integer32, usdDsx1Mode INTEGER, usdDsx1LineBuildOutCapabilities Integer32, usdDsx1LineBuildOutType INTEGER, usdDsx1LineAttenuation INTEGER, usdDsx1LineLength Integer32, usdDsx1LowerIfIndex InterfaceIndexOrZero, usdDsx1RowStatus RowStatus, usdDsx1SendCode INTEGER, usdDsx1YellowAlarm INTEGER, usdDsx1RemoteLoopback INTEGER, usdDsx1FdlCarrier INTEGER, usdDsx1FdlEic DisplayString, usdDsx1FdlLic DisplayString, usdDsx1FdlFic DisplayString, usdDsx1FdlUnit DisplayString, usdDsx1FdlPfi DisplayString, usdDsx1FdlPort DisplayString, usdDsx1FdlGenerator DisplayString } usdDsx1TimeSlotMap OBJECT-TYPE SYNTAX UsdTimeSlotMap MAX-ACCESS read-only STATUS current DESCRIPTION "A bitmap representing the timeslots on the DS1/E1 interface that have been allocated for service. For channelized DS1/E1, set bits reflect the union of timeslot allocations across all fractional arrangements operating over this DS1/E1 interface. For unchannelized DS1/E1, all relevant timeslot bits will be set." ::= { usdDsx1ConfigEntry 1 } usdDsx1Ds1ChannelNumber OBJECT-TYPE SYNTAX Integer32 (0..28) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable represents the channel number of the DS1/E1 on its parent DS3/E3. A value of 0 indicates this DS1/E1 does not have a parent DS3/E3." ::= { usdDsx1ConfigEntry 2 } usdDsx1Capabilities OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "A value which indicates the set of capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero. Then, for each capability, C, in the range 1 through 3, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only E1 capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both T1 and J1 capable would have a value of 5 (2^(1-1) + 2^(3-1)). The values for DS1/E1 interface capabilities are as follows: capability function 1 T1 2 E1 3 J1 " ::= { usdDsx1ConfigEntry 3 } usdDsx1Mode OBJECT-TYPE SYNTAX INTEGER { t1(1), e1(2), j1(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable represents the DS1/E1 interface mode. The value of the usdDsx1Capabilities object for the DS1/E1 interface indicates the valid set of values for this object." ::= { usdDsx1ConfigEntry 4 } usdDsx1LineBuildOutCapabilities OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "A value which indicates the set of line build out capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero. Then, for each line build out capability, C, in the range 1 or 2, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only short haul capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both short haul and long haul capable would have a value of 3 (2^(1-1) + 2^(2-1)). The values for DS1/E1 interface line build out capabilities are as follows: line build out capability function 1 short haul 2 long haul" ::= { usdDsx1ConfigEntry 5 } usdDsx1LineBuildOutType OBJECT-TYPE SYNTAX INTEGER { shortHaul(1), longHaul(2), notSupported(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable represents the configured line build out type of the DS1/E1 interface. The value of the usdDsx1LineBuildOutCapabilities object for the DS1/E1 interface indicates the valid set of values for this object." ::= { usdDsx1ConfigEntry 6 } usdDsx1LineAttenuation OBJECT-TYPE SYNTAX INTEGER { db0(1), dbMinus7Point5(2), dbMinus15(3), dbMinus22Point5(4), notSupported(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable represents the configured line attenuation of the DS1/E1 interface. Note that the value of this object only takes effect when the value of the usdDsx1LineBuildOutType for the DS1/E1 interface is set to longHaul(2)." ::= { usdDsx1ConfigEntry 7 } usdDsx1LineLength OBJECT-TYPE SYNTAX Integer32 (0..64000) UNITS "meters" MAX-ACCESS read-create STATUS current DESCRIPTION "This variable represents the length of the DS1/E1 line in meters. Note that the value of this object only takes effect when the value of the usdDsx1LineBuildOutType for the DS1/E1 interface is set to shortHaul(1)." ::= { usdDsx1ConfigEntry 8 } usdDsx1LowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the interface over which this Dsx1 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { usdDsx1ConfigEntry 9 } usdDsx1RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdDsx1RowStatus usdDsx1LowerIfIndex In addition, when creating an entry the following conditions must hold: A value for ifIndex must have been determined previously, by reading usdDsx1NextIfIndex. The interface identified by usdDsx1hLowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table." ::= { usdDsx1ConfigEntry 10 } usdDsx1SendCode OBJECT-TYPE SYNTAX INTEGER { sendInbandLineCode(1), sendBellcoreLineCode(2), sendBellcoreInbandLineCode(3), sendQRSPattern(4), sendAllZerosPattern(5), sendAllOnesPattern(6), sendAltZeroOnePattern(7), sendTwo11Pattern(8), sendTwo15Pattern(9), sendTwo20Pattern(10), sendTwo23Pattern(11), sendUnfrQRSPattern(12), sendUnfrAllZerosPattern(13), sendUnfrAllOnesPattern(14), sendUnfrAltZeroOnePattern(15), sendUnfrTwo11Pattern(16), sendUnfrTwo15Pattern(17), sendUnfrTwo20Pattern(18), sendUnfrTwo23Pattern(19), otherPattern(20) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates what type of code is being sent across the DS1 interface by the device." DEFVAL { otherPattern } ::= { usdDsx1ConfigEntry 11 } usdDsx1YellowAlarm OBJECT-TYPE SYNTAX INTEGER { generate(1), detect(2), none(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This bitmap indicates the yellow alarm settings, and is the sum of the capabilities." ::= { usdDsx1ConfigEntry 12 } usdDsx1RemoteLoopback OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the remote loopback setting." DEFVAL { disabled } ::= { usdDsx1ConfigEntry 13 } usdDsx1FdlCarrier OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the interface is used in carrier environment." DEFVAL { disabled } ::= { usdDsx1ConfigEntry 14 } usdDsx1FdlEic OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the equipment identification code." DEFVAL { "" } ::= { usdDsx1ConfigEntry 15 } usdDsx1FdlLic OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the location identification code." DEFVAL { "" } ::= { usdDsx1ConfigEntry 16 } usdDsx1FdlFic OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the frame identification code." DEFVAL { "" } ::= { usdDsx1ConfigEntry 17 } usdDsx1FdlUnit OBJECT-TYPE SYNTAX DisplayString (SIZE(0..6)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the unit identification code." DEFVAL { "" } ::= { usdDsx1ConfigEntry 18 } usdDsx1FdlPfi OBJECT-TYPE SYNTAX DisplayString (SIZE(0..38)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the facility identification code." DEFVAL { "" } ::= { usdDsx1ConfigEntry 19 } usdDsx1FdlPort OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the equipment port number." ::= { usdDsx1ConfigEntry 20 } usdDsx1FdlGenerator OBJECT-TYPE SYNTAX DisplayString (SIZE(0..38)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the generator number." ::= { usdDsx1ConfigEntry 21 } usdDs1NextIfIndex OBJECT-TYPE SYNTAX UsdNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in usdDsx1ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously." ::= { usdDs1Objects 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notification control objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- usdDs1TrapControl OBJECT IDENTIFIER ::= { usdDs1MIB 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholders follow. -- The following two OBJECT IDENTIFIERS are used to define SNMPv2 -- Notifications that are easily translated into SNMPv1 Traps. -- usdDs1Traps OBJECT IDENTIFIER ::= { usdDs1MIB 3 } -- usdDs1TrapPrefix OBJECT IDENTIFIER ::= { usdDs1Traps 0 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ usdDs1Conformance OBJECT IDENTIFIER ::= { usdDs1MIB 4 } usdDs1Compliances OBJECT IDENTIFIER ::= { usdDs1Conformance 1 } usdDs1Groups OBJECT IDENTIFIER ::= { usdDs1Conformance 2 } -- -- compliance statements -- usdDs1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Unisphere DS1/E1 MIB. This statement became obsolete when new objects were added." MODULE -- this module MANDATORY-GROUPS { usdDs1Group } ::= { usdDs1Compliances 1 } -- RX 1.0 usdDs1Compliance1 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Unisphere DS1/E1 MIB. This statement became obsolete when dynamic DS1 interface support was added." MODULE -- this module MANDATORY-GROUPS { usdDs1Group1 } ::= { usdDs1Compliances 2 } -- RX 1.1 usdDs1Compliance2 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "Obsolete compliance statement for entities which implement the Unisphere DS1/E1 MIB. This statement became obsolete when FDL support was added." MODULE -- this module MANDATORY-GROUPS { usdDs1Group2 } ::= { usdDs1Compliances 3 } -- RX 3.0 usdDs1Compliance3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Unisphere DS1/E1 MIB." MODULE -- this module MANDATORY-GROUPS { usdDs1Group3 } ::= { usdDs1Compliances 4 } -- RX 4.0 -- -- units of conformance -- usdDs1Group OBJECT-GROUP OBJECTS { usdDsx1TimeSlotMap, usdDsx1Ds1ChannelNumber } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of DS1/E1 interfaces in a Unisphere product. This group became obsolete when new objects where added to the MIB." ::= { usdDs1Groups 1 } usdDs1Group1 OBJECT-GROUP OBJECTS { usdDsx1TimeSlotMap, usdDsx1Ds1ChannelNumber, usdDsx1Capabilities, usdDsx1Mode, usdDsx1LineBuildOutCapabilities, usdDsx1LineBuildOutType, usdDsx1LineAttenuation, usdDsx1LineLength } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of DS1/E1 interfaces in a Unisphere product. This group became obsolete when dynamic DS1 interface support was added." ::= { usdDs1Groups 2 } usdDs1Group2 OBJECT-GROUP OBJECTS { usdDsx1TimeSlotMap, usdDsx1Ds1ChannelNumber, usdDsx1Capabilities, usdDsx1Mode, usdDsx1LineBuildOutCapabilities, usdDsx1LineBuildOutType, usdDsx1LineAttenuation, usdDsx1LineLength, usdDsx1LowerIfIndex, usdDsx1RowStatus, usdDs1NextIfIndex } STATUS obsolete DESCRIPTION "Obsolete collection of objects providing management of DS1/E1 interfaces in a Unisphere product. This group became obsolete when FDL support was added." ::= { usdDs1Groups 3 } usdDs1Group3 OBJECT-GROUP OBJECTS { usdDsx1TimeSlotMap, usdDsx1Ds1ChannelNumber, usdDsx1Capabilities, usdDsx1Mode, usdDsx1LineBuildOutCapabilities, usdDsx1LineBuildOutType, usdDsx1LineAttenuation, usdDsx1LineLength, usdDsx1LowerIfIndex, usdDsx1RowStatus, usdDsx1SendCode, usdDsx1YellowAlarm, usdDsx1RemoteLoopback, usdDsx1FdlCarrier, usdDsx1FdlEic, usdDsx1FdlLic, usdDsx1FdlFic, usdDsx1FdlUnit, usdDsx1FdlPfi, usdDsx1FdlPort, usdDsx1FdlGenerator, usdDs1NextIfIndex } STATUS current DESCRIPTION "A collection of objects providing management of DS1/E1 interfaces in a Unisphere product." ::= { usdDs1Groups 4 } END