USR-CHASSIS-MIB DEFINITIONS ::= BEGIN
	IMPORTS
        OBJECT-TYPE, MODULE-IDENTITY, Counter32, Integer32
                  FROM SNMPv2-SMI
        DateAndTime
                  FROM SNMPv2-TC
        UsrDisplayString, common, UsrConfigStatus
                  FROM USR-DEFINITIONS-MIB;
    usrChassis MODULE-IDENTITY
         LAST-UPDATED "200205051700Z"
         ORGANIZATION "CommWorks Corporation, a 3Com Company"
         CONTACT-INFO "Customer Support"
         DESCRIPTION
                 "The commWorks enterprise defined MIB objects
                   for the card chassis."
--       REVISION "200205051700Z"
--       DESCRIPTION "Converted to SNMPv2"
         ::= { common 41 }
	usrChassisConfigFileName OBJECT-TYPE
		SYNTAX      UsrDisplayString
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION		
		  "The name of a ConfigFile to read/write permanent
		   database records. If the value of this object is an
           empty string, then the NMBA process uses the
           default name `@file://Chassis.cfg'. "
	::= { usrChassis 1 }
	usrChassisCFMStatusFlag  OBJECT-TYPE
	 	SYNTAX	    UsrConfigStatus
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
		  "Setting the value of this object to `save' causes the values
		   of the ChassisSlotTable to be written out to the
           current config file, which is stored in the 
           usrChassisConfigFileName object. While the new
           ConfigFile is being written, the NMBA process
		   will set the value of this flag to `saving''. Any
		   attempts to set the value while it is not `normal'
		   (i.e. the file is currently being written to the
		   ConfigFile) while result in a badValue error being
		   returned. Setting the value to `normal' will result in no
		   action."
	::= { usrChassis 2 }
	usrChassisChassisAwareness  OBJECT-TYPE
		SYNTAX   INTEGER {
			enabled(1),
			disabled(2)
			}
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
		  "The value of this object determines if
		   chassis awareness messages from the NMC are to be
           handled or not.  If this object is set to `enabled' 
           then when a chassis awareness message is received, 
           the information contained within the message is used 
           to update the chassis configuration. If this object 
           is set to `disabled' any chassis awareness messages 
           received from the NMC are ignored, and the configuration
           of the chassis must be set statically through SNMP sets,
           or CLI commands. To be able to SET this object
           usrChassisDSA must be 'enabled'."            
	        --CONFIGURABLE
	::= { usrChassis 3 }
	usrChassisSlotTable	OBJECT-TYPE
		SYNTAX SEQUENCE OF UsrChassisSlotEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
                  "A table containing one row per slot in the chassis.  Each
		   row describes the characteristics of the slot"
	::= { usrChassis 4 }
	usrChassisSlotEntry OBJECT-TYPE
         SYNTAX      UsrChassisSlotEntry
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
            ""
         INDEX   { usrChassisSlot}
	::= { usrChassisSlotTable 1 }
	UsrChassisSlotEntry ::=
         SEQUENCE {
         usrChassisSlot
            Integer32,
         usrChassisOwner
            INTEGER,
         usrChassisCardType
            INTEGER,
         usrChassisNumPorts
            Integer32,
         usrChassisDescription
            UsrDisplayString,
	     usrChassisType
  	        INTEGER,
         usrChassisConsole
            INTEGER
         }
	usrChassisSlot OBJECT-TYPE
         SYNTAX  Integer32
	 MAX-ACCESS  not-accessible
         STATUS  current
         DESCRIPTION
            "The slot number of this row."
	::= { usrChassisSlotEntry 1 }
	usrChassisOwner OBJECT-TYPE
		SYNTAX   INTEGER {
			no(1),
			yes(2),
			assigned(3)
			}
         MAX-ACCESS   read-write
         STATUS   current
         DESCRIPTION
            "An indication if this slot's card has this Gateway card assigned
             as the owning gateway"
         --CONFIGURABLE
         ::= { usrChassisSlotEntry 2 }
	usrChassisCardType OBJECT-TYPE
		SYNTAX   INTEGER {
			empty(1),
			unknown(2),
			quadV32Modem(3),
			dualT1E1(4),
			genericQuadIModem(5),
			hdmsimulator(6),
			trGatewayNAC(7),
			x25GatewayNAC(8),
			dualV34ModemNAC(9),
			quadV32DigitalTerboModemNAC(10),
			quadV32AnalogTerboModemNAC(11),
			quadV32DigAnlTerboModemNAC(12),
			quadV34DigModemNAC(13),
			quadV34AnlModemNAC(14),
			quadV34DigAnlModemNAC(15),
			singleT1NAC(16),
			ethernetGatewayNAC(17),
			accessServer(18),
			i486TrGatewayNAC(19),
			i486EthernetGatewayNAC(20),
			genericQuadModem(21),
			dualRS232NAC(22),
			i486X25GatewayNAC(23),
			i486DXAPINAC(24),
			applicationServerNAC(25),
			iSDNGatewayNAC(26),
			iSDNpriT1NAC(27),
			clkedNetMgtCard(28),
			modemPoolManagementNAC(29),
			modemPoolNetserverNAC(30),
			modemPoolV34ModemNAC(31),
			modemPoolISDNNAC(32),
			nTServerNAC(33),
			quadV34DigitalG2NAC(34),
			quadV34AnalogG2NAC(35),
			quadV34DigAnlgG2NAC(36),
			nETServerFrameRelayNAC(37),
			nETServerTokenRingNAC(38),
			x2524ChannelNAC(39),
			highDensityModem(41),
			wirelessGatewayNAC(42),
			ciscoAS51NAC(43),
			enhancedAccessServer(44),
			enhancedISDNGatewayNAC(45),
			hdm24ChannelNAC(46),
			hdm30ChannelNAC(47),
			riscNetserverNAC(48),
            dualP6NAC(49),
            p5NMC(50),
            ss7iHapiCard(51),
            ds3jhdmt1NAC(52),
            jhdme1NAC(53),
            harc2CARD(54)
			}
         MAX-ACCESS   read-write
         STATUS   current
         DESCRIPTION
            "The ID of the card that is resident in this slot of
             the chassis."
         --CONFIGURABLE
         ::= { usrChassisSlotEntry 3 }
	usrChassisNumPorts OBJECT-TYPE
         SYNTAX  Integer32
         MAX-ACCESS  read-write
         STATUS  current
         DESCRIPTION
            "The number ports that are enabled on the card in this 
             chassis slot. This value will be determined when the the
	     card type for this slot is set, or when a chassis
             awareness message arrives updating this slot.  If the
             card type is empty, the number of ports is set to zero."
         --CONFIGURABLE
	::= { usrChassisSlotEntry 4 }
	usrChassisDescription OBJECT-TYPE
         SYNTAX  UsrDisplayString (SIZE(0..32))
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
            "A string that describes the type of card in this chassis 
    		   slot."
	::= { usrChassisSlotEntry 5 }
	usrChassisType OBJECT-TYPE
		SYNTAX   INTEGER {
			static(1),
			dynamic(2)
			}
         MAX-ACCESS   read-write
         STATUS   current
         DESCRIPTION
            "An indicator that tells if this slot's (row's) data was
             created statically by configuration, or dynamically by
             the receipt of chassis awareness information from the
             NMC.  Only static entries are saved to the configuration
             file.  Dynamic entries are saved as static entries with 
             an empty card type. If dynamic information is learned
             it replaces the information in a static entry.  A dynamic
             entry cannot be changed through the CLI or an SNMP set."
         ::= { usrChassisSlotEntry 6 }
    usrChassisConsole OBJECT-TYPE
        SYNTAX   INTEGER {
            no(1),
            yes(2)
            }
         MAX-ACCESS   read-write
         STATUS   current
         DESCRIPTION
            "An indicator that tells if this slot supports a packet
         bus based console."
    DEFVAL { no }
         --CONFIGURABLE
         ::= { usrChassisSlotEntry 7 }
	usrChassisDSA  OBJECT-TYPE
		SYNTAX   INTEGER {
			enabled(1),
			disabled(2)
			}
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
		  "The value of this object determines if
		   the card is participating in the
		   dynamic slot assignment algorithm.
		   The default is disabled."
	        --CONFIGURABLE
	::= { usrChassis 5 }
	usrChassisDSAQueryReq  OBJECT-TYPE
		SYNTAX      Counter32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
		  "The number of DSA query requests from NMC seen by this card"
	::= { usrChassis 6 }
	usrChassisDSAQueryRsp  OBJECT-TYPE
		SYNTAX      Counter32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
		  "The number of DSA query responses sent by this card to NMC"
	::= { usrChassis 7 }
	usrChassisDSAServiceReq  OBJECT-TYPE
		SYNTAX      Counter32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
		  "The number of DSA service requests issued to this card"
	::= { usrChassis 8 }
	usrChassisDSAServiceAssignments  OBJECT-TYPE
		SYNTAX      Counter32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
		  "The number of DSA assignments performed by this card"
	::= { usrChassis 9 }
	usrChassisDSATraps  OBJECT-TYPE
		SYNTAX      Counter32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
		  "The number of DSA traps issued"
	::= { usrChassis 10 }
	usrChassisDSAInvalidRX  OBJECT-TYPE
		SYNTAX      Counter32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
		  "The number invalid DSA packets received"
	::= { usrChassis 11 }
    usrChassisWhenLastNMCQuery    OBJECT-TYPE
		SYNTAX		DateAndTime
		MAX-ACCESS  read-only
		STATUS		current
		DESCRIPTION
			"Time when the last NMC query packet was received"
	::= { usrChassis 12 }
	usrChassisDSARebalancing  OBJECT-TYPE
		SYNTAX   INTEGER {
			enabled(1),
			disabled(2)
			}
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
		  "The value of this object determines if
		   the card allows slot rebalancing when
		   participating in the dynamic slot assignment algorithm.
		   The default is enabled."
	        --CONFIGURABLE
	::= { usrChassis 13 }
	usrNMCSnmpForwarding  OBJECT-TYPE
		SYNTAX   INTEGER {
			enabled(1),
			disabled(2)
			}
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
		  "The value of this object determines if Hiper will
		   accept SNMP forwarded messages from the NMC over NM bus.
                   or CLI commands."
	        --CONFIGURABLE
	::= { usrChassis 14 }
END         -- End usrChassis MIB definitions
-- ************************************************************************
PB-MIB DEFINITIONS ::= BEGIN
IMPORTS
   Counter
      FROM RFC1155-SMI
   OBJECT-TYPE
      FROM RFC-1212
   nas
      FROM USR-DEFINITIONS-MIB;
pb OBJECT IDENTIFIER ::= { nas 12 }
pbCfg OBJECT IDENTIFIER ::= { pb 1 }
pbCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PbCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing an configuration information for each 
Gateway NAC in the NAS chassis."
::= { pbCfg 1 }
pbCfgEntry OBJECT-TYPE
SYNTAX PbCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"There is one Configuration row for each Gateway Card in the 
NAS chassis."
INDEX { pbCfgIndex }
::= { pbCfgTable 1 }
PbCfgEntry ::=
SEQUENCE {
pbCfgIndex
    INTEGER,
pbCfgMaxSessions
    INTEGER
}
pbCfgIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each Gateway Card in the chassis. The 
value of this object matches the value of the index of the 
corresponding Gateway Card's entry in the entity table of 
the chassis MIB."
::= { pbCfgEntry 1 }
pbCfgMaxSessions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This read-only object defines the maximum number of packet 
bus sessions supported by this entity. This value is used 
to determine the number of rows present in the 
pbSessionTable for this entity."
::= { pbCfgEntry 2 }
pbSession OBJECT IDENTIFIER ::= { pb 2 }
pbSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF PbSessionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Packet Bus Session table contains an entry for each 
manageable Gateway NAC in the chassis.  It provides a means 
to configure packet bus connections and determine the 
status of the defined connections.  This table resides in 
the NAC and can be implemented as either a dense or sparse 
table."
::= { pbSession 1 }
pbSessionEntry OBJECT-TYPE
SYNTAX PbSessionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"There is an row for each Packet Bus connection."
INDEX { pbSessionEntityIndex, pbSessionIndex }
::= { pbSessionTable 1 }
PbSessionEntry ::=
SEQUENCE {
pbSessionEntityIndex
    INTEGER,
pbSessionIndex
    INTEGER,
pbSessionDestSlot
    INTEGER,
pbSessionDestChan
    INTEGER,
pbSessionDestSess
    INTEGER,
pbSessionRowState
    INTEGER,
pbSessionStatus
    INTEGER,
pbSessionReqStatus
    INTEGER,
pbSessionLastRequest
    INTEGER,
pbSessionPktSents
    Counter,
pbSessionPktRcvds
    Counter,
pbSessionPktSize
    INTEGER,
pbSessionBusTimeOuts
    Counter,
pbSessionErrorStatus
    INTEGER
}
pbSessionEntityIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each entity in the chassis.  The value 
of this object matches the value of the index of the 
corresponding entry in the entity table of the chassis MIB."
::= { pbSessionEntry 1 }
pbSessionIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies the packet bus session 
for this entity."
::= { pbSessionEntry 2 }
pbSessionDestSlot OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number that identifies the slot of the entity in the 
chassis to which a packet bus session has been assigned."
::= { pbSessionEntry 3 }
pbSessionDestChan OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number that identifies a particular entity in a slot."
::= { pbSessionEntry 4 }
pbSessionDestSess OBJECT-TYPE
SYNTAX INTEGER (0..16320)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A number that identifies the particular session from the 
other  communicating Gateway."
::= { pbSessionEntry 5 }
pbSessionRowState OBJECT-TYPE
SYNTAX INTEGER{
  free(1),
  used(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set availability for this row of packet bus session. 
Default=free(1)."
::= { pbSessionEntry 6 }
pbSessionStatus OBJECT-TYPE
SYNTAX INTEGER{
  unassigned(1),
  assigned(2),
  connected(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the current status of the packet bus session.  A 
status of Unassigned coupled with a state of used indicates 
that a packet bus failure has occurred."
::= { pbSessionEntry 7 }
pbSessionReqStatus OBJECT-TYPE
SYNTAX INTEGER{
  disconnected(1),
  connected(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to assign or delete a session between the entities 
specified by the table indices. A request connect is a 
issue of packet bus session link start, and a request 
disconnect is a issue of packet bus session link terminate. 
Default=disconnected(1)."
::= { pbSessionEntry 8 }
pbSessionLastRequest OBJECT-TYPE
SYNTAX INTEGER{
  unknown(1),
  open(2),
  close(3),
  listen(4),
  dial(5),
  disconnect(6),
  transmit(7),
  receive(8),
  setMode(9),
  query(10),
  flush(11),
  kill(12),
  reserve(13),
  answer(14),
  attach(15)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Indicates the type of communications contained in the last 
packet sent to the destination entity."
::= { pbSessionEntry 9 }
pbSessionPktSents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A counter that indicates number of packets that have been 
sent."
::= { pbSessionEntry 10 }
pbSessionPktRcvds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A counter that indicates number of packets that have been 
received."
::= { pbSessionEntry 11 }
pbSessionPktSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A number that indicates the packet size of the current or 
last established session."
::= { pbSessionEntry 12 }
pbSessionBusTimeOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A counter that indicates number of packet bus timeout that 
have occurred."
::= { pbSessionEntry 13 }
pbSessionErrorStatus OBJECT-TYPE
SYNTAX INTEGER{
  noError(1),
  invalidParm(2),
  socketNotOpened(3),
  noMoreSocket(4),
  connectionExist(5),
  connectionFailed(6),
  noMoreConnObj(7),
  noActiveConn(8),
  ackWaitTimeout(9),
  hwNakRcvd(10),
  otherBusError(11),
  linkStartRcvd(12),
  outOfSeqFrame(13),
  noMemory(14),
  nullPointer(15),
  invalidBlock(16),
  notInitialized(17),
  failedToRecv(18),
  invalidMsgType(19),
  exceedMaxSends(20),
  connectionReset(21),
  socketClosed(22),
  uiReqPending(23),
  heartbeatTimeout(24),
  remoteBusy(25),
  localBusy(26),
  noResponse(27),
  linkdownNoTx(28),
  noDataToTx(29),
  txPreAck(30),
  txTardyAck(31),
  txBusTimeOut(32),
  rxBusTimeOut(33),
  txTAL(34),
  rxTAL(35),
  txMasterTimeOut(36),
  clkVanished(37),
  clkReturned(38),
  shutdown(39),
  frameError(40),
  xIDTimeOut(41),
  recvLSinInfoTransferState(42),
  recvIFrameWithWrongSeq(43),
  rxMsgBufferOverflow(44),
  linkDown(45),
  listenFailed(46),
  listenRcvFailed(47),
  dtrDrop(48),
  answerFailed(49),
  openFailed(50),
  closeFailed(51),
  readFailed(52),
  writeFailed(53),
  autoParityFailed(54),
  setmodeFailed(55),
  badDataBase(56),
  padStreamsError(57),
  padError(58)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Error return status from last packet command."
::= { pbSessionEntry 14 }
pbTrapEna OBJECT IDENTIFIER ::= { pb 3 }
pbTrapEnaTable OBJECT-TYPE
SYNTAX SEQUENCE OF PbTrapEnaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing an enable for each trap that a 
manageable Gateway entity is capable of generating."
::= { pbTrapEna 1 }
pbTrapEnaEntry OBJECT-TYPE
SYNTAX PbTrapEnaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"There is one Gateway trap enable row for each Gateway card 
in the NAS chassis."
INDEX { pbTrapEnaIndex, pbTrapSessionIndex }
::= { pbTrapEnaTable 1 }
PbTrapEnaEntry ::=
SEQUENCE {
pbTrapEnaIndex
    INTEGER,
pbTrapSessionIndex
    INTEGER,
pbTrapEnaSessActive
    INTEGER,
pbTrapEnaPktBusCongest
    INTEGER,
pbTrapEnaPktBusSessLost
    INTEGER,
pbTrapEnaSessionInactive
    INTEGER,
pbTrapEnaSessionError
    INTEGER
}
pbTrapEnaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each Gateway Card in the chassis. The 
value of this object matches the value of the index of the 
corresponding Gateway Card's entry in the entity table of 
the chassis MIB."
::= { pbTrapEnaEntry 1 }
pbTrapSessionIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value that identifies the packet bus session for trap 
enable/disable."
::= { pbTrapEnaEntry 2 }
pbTrapEnaSessActive OBJECT-TYPE
SYNTAX INTEGER{
  enableTrap(1),
  disableAll(2),
  enableLog(3),
  enableAll(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An object which enables or disables the Active Session 
trap."
::= { pbTrapEnaEntry 3 }
pbTrapEnaPktBusCongest OBJECT-TYPE
SYNTAX INTEGER{
  enableTrap(1),
  disableAll(2),
  enableLog(3),
  enableAll(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An object to enable or disable the Packet Bus Congestion 
trap. The Packet Bus Congestion trap is generated when a 
valid packet bus session is in progress but either the 
Modem or the Gateway packet bus driver is experiencing 
congestion problem."
::= { pbTrapEnaEntry 4 }
pbTrapEnaPktBusSessLost OBJECT-TYPE
SYNTAX INTEGER{
  enableTrap(1),
  disableAll(2),
  enableLog(3),
  enableAll(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An object to enable or disable the trap that is generated 
when a valid Packet Bus session has been lost."
::= { pbTrapEnaEntry 5 }
pbTrapEnaSessionInactive OBJECT-TYPE
SYNTAX INTEGER{
  enableTrap(1),
  disableAll(2),
  enableLog(3),
  enableAll(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An object to enable or disable a trap which is generated 
when a request is made to change a packet bus session from 
the active to inactive state."
::= { pbTrapEnaEntry 6 }
pbTrapEnaSessionError OBJECT-TYPE
SYNTAX INTEGER{
  enableTrap(1),
  disableAll(2),
  enableLog(3),
  enableAll(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An object which enables or disables the packet bus session 
error trap."
::= { pbTrapEnaEntry 7 }
END