-- ************************************************************************* -- ************************************************************************* -- TapeAlert (1.3.6.1.4.1.11.2.3.9.7.1) -- Issue: v2.1 -- Date: 16th May 1998 -- Changes from v2.0: -- Added new flag 19 from v2.1 spec -- Changes from v1.2: -- Added new flags for library device support from TapeAlert v2 spec -- Added new flags for tape drive/autoloader support from v2 spec -- Updated description for errorTrapNum to reflect library flags 255 offset -- -- Changes from v1.1: -- Changed trap definitions for Managewise compilation -- Changes from v1.0: -- Minor change to errorDate field making it 14 octets long rather than 7 -- -- Overall MIB Structure -- -- tapeAlert -- .1 control -- .1 revMajor (used for presence checking) -- .2 revMinor -- .3 trapEnable (optional) -- .4 autoCleanEnable (optional) -- .5 autoCopyEnable (optional) -- .2 numDevices -- .3 {devTable} (table of device information) -- .1 devInfo (device information entry in table) -- .1 devNum (index) -- .2 tapeAlertCapability -- .3 hbaName -- .4 hbaNumber -- .5 hbaChannel -- .6 driveScsiID -- .7 driveInquiry -- .8 driveFirmware -- .9 driveType -- .10 driveCompress -- .11 currentMedia -- .12 driveSerialNum (optional) -- .4 numErrors -- .5 {errorHistoryTable} (table of error history) -- .1 errorHistoryEntry (error entry in table) -- .1 errorIndex (index) -- .2 errorHbaNumber -- .3 errorHbaChannel -- .4 errorDriveScsiID -- .5 errorDate -- .6 errorTrapNum -- .7 errorMedia -- ************************************************************************** -- ************************************************************************** TapeAlert-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; hp OBJECT IDENTIFIER ::= { enterprises 11 } nm OBJECT IDENTIFIER ::= { hp 2 } system OBJECT IDENTIFIER ::= { nm 3 } netPeripheral OBJECT IDENTIFIER ::= { system 9 } netTape OBJECT IDENTIFIER ::= { netPeripheral 7 } tapeAlert OBJECT IDENTIFIER ::= { netTape 1 } control OBJECT IDENTIFIER ::= { tapeAlert 1 } -- ************************************************************************** -- control group definitions -- ************************************************************************** revMajor OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The TapeAlert major revision level (left of the decimal). Used for presence checking." ::= { control 1 } revMinor OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The TapeAlert minor revision level (right of the decimal)." ::= { control 2 } trapEnable OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS optional DESCRIPTION "Indicates whether agent should or should not send TapeAlert traps." ::= { control 3 } autoCleanEnable OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS optional DESCRIPTION "Indicates whether application should or should not perform an automatic cleaning operation based on TapeAlert cleaning information." ::= { control 4 } autoCopyEnable OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS optional DESCRIPTION "Indicates whether application should or should not perform an automatic tape copy or tape discard operation based on TapeAlert media information." ::= { control 5 } -- ************************************************************************** -- numDevices definition -- Total number of tape devices attached to server. -- ************************************************************************** numDevices OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Total number of tape devices attached to server and managed by TapeAlert agent. Zero means no devices present." ::= { tapeAlert 2 } -- ************************************************************************** -- devTable definition -- A table of tape device information, consisting of a list of devInfo -- entries. The number of entries is given by the value of numDevices. -- ************************************************************************** devTable OBJECT-TYPE SYNTAX SEQUENCE OF DevInfo ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of tape device information entries. The number of entries is given by the value of numDevices." ::= { tapeAlert 3 } -- ************************************************************************** -- devInfo definition -- A tape device information entry, containing configuration information for -- a particular tape device -- ************************************************************************** devInfo OBJECT-TYPE SYNTAX DevInfo ACCESS not-accessible STATUS mandatory DESCRIPTION "A tape device information entry, containing configuration information for a particular tape device." INDEX { devNum } ::= { devTable 1 } DevInfo ::= SEQUENCE { devNum INTEGER (0..255), tapeAlertCapability INTEGER (0..1), hbaName DisplayString, hbaNumber INTEGER (0..255), hbaChannel INTEGER (0..255), driveScsiID INTEGER (0..255), driveInquiry DisplayString, driveFirmware DisplayString, driveType DisplayString, driveCompress INTEGER (0..1), currentMedia DisplayString, driveSerialNum DisplayString } devNum OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "A unique index value for each tape device. Its value ranges between 1 and the value of numDevices." ::= { devInfo 1 } tapeAlertCapability OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether tape device supports TapeAlert, with zero indicating not supported and one indicating supported" ::= { devInfo 2 } hbaName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of SCSI Host Bus Adaptor connected to tape drive, for example Adaptec AHA2740AT." ::= { devInfo 3 } hbaNumber OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of SCSI Host Bus Adaptor connected to tape drive, for example 0 is first HBA on the system." ::= { devInfo 4 } hbaChannel OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "SCSI Channel number of SCSI Host Bus Adaptor connected to tape drive, for example 0 is first SCSI channel of HBA." ::= { devInfo 5 } driveScsiID OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "SCSI ID of Tape Device." ::= { devInfo 6 } driveInquiry OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "SCSI Inquiry data of Tape Device, with vendor ID data followed by device ID data." ::= { devInfo 7 } driveFirmware OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Firmware revision of Tape Device." ::= { devInfo 8 } driveType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Device type of Tape Device, for example DDS1" ::= { devInfo 9 } driveCompress OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether Tape Device supports hardware compression, with zero indicating not supported and one indicating supported." ::= { devInfo 10 } currentMedia OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Software label of current media loaded in drive" ::= { devInfo 11 } driveSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Hardware Serial Number of Tape Device, if available" ::= { devInfo 12 } -- ************************************************************************** -- numErrors definition -- Total number of TapeAlert error traps logged by TapeAlert agent since -- agent was initialised. -- ************************************************************************** numErrors OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "Total number of TapeAlert error traps logged by TapeAlert agent since agent was initialised. Zero means that no TapeAlert trap events occurred since initialisation." ::= { tapeAlert 4 } -- ************************************************************************** -- errorHistoryTable definition -- This table will provide a historical list of all TapeAlert errors since -- the TapeAlert agent was initialised. This will provide the ability to show -- the error history of a specified tape device and identify any trends -- ************************************************************************** errorHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF ErrorHistoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of historical error entries for all tape devices on the server. The list should contain an entry for each TapeAlert trap sent since the TapeAlert agent was initialised." ::= { tapeAlert 5 } -- ************************************************************************** -- errorHistoryEntry definition -- An error entry in the errorHistoryTable, containing information on a -- historic TapeAlert trap sent by the TapeAlert agent -- ************************************************************************** errorHistoryEntry OBJECT-TYPE SYNTAX ErrorHistoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An error entry in the errorHistoryTable, containing information on a historic TapeAlert trap sent by the TapeAlert agent" INDEX { errorIndex } ::= { errorHistoryTable 1 } ErrorHistoryEntry ::= SEQUENCE { errorIndex INTEGER (0..255), errorHbaNumber INTEGER (0..255), errorHbaChannel INTEGER (0..255), errorDriveScsiID INTEGER (0..255), errorDate OCTET STRING, errorTrapNum INTEGER (1..64), errorMedia DisplayString } errorIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "A unique index value for each error entry. Its value ranges between 1 and the value of numErrors." ::= { errorHistoryEntry 1 } errorHbaNumber OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of SCSI Host Bus Adaptor connected to the tape drive that caused this specific TapeAlert error, for example 0 is first HBA on the system." ::= { errorHistoryEntry 2 } errorHbaChannel OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "SCSI channel number of SCSI Host Bus Adaptor connected to the tape drive that caused this specific TapeAlert error, for example 0 is first SCSI channel of HBA." ::= { errorHistoryEntry 3 } errorDriveScsiID OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "SCSI of the tape drive that caused this specific TapeAlert error, for example 0 is first SCSI channel of HBA." ::= { errorHistoryEntry 4 } errorDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (14)) ACCESS read-only STATUS mandatory DESCRIPTION "Date and time of the error in yyyymmddHHMMSS format: where yyyy year 1980-9999 mm month 01-12 dd day 01-31 HH hour 00-23 MM minute 00-59 SS second 00-60 (use 60 for leap-second) Example 14:35:26 5th Oct 1996 = 19961005143526" ::= { errorHistoryEntry 5 } errorTrapNum OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "TapeAlert trap number of the error. For tape drive/autoloader traps, range 1-64. For library device traps, range 256-319 (Library device traps = TapeAlert flag + 255)" ::= { errorHistoryEntry 6 } errorMedia OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Software label of the media that was loaded in the tape drive at the time of the error." ::= { errorHistoryEntry 7 } -- ************************************************************************** -- Trap Definitions -- ************************************************************************** tapeAlertTrap1 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape drive is having problems reading data. No data has been lost, but there has been a reduction in the performance of the tape." --#TYPE "HP TapeAlert #1" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Problems Reading Data" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 1 --#STATE OPERATIONAL ::= 1 tapeAlertTrap2 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape drive is having problems writing data. No data has been lost, but there has been a reduction in the capacity of the tape." --#TYPE "HP TapeAlert #2" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Problems Writing Data" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 2 --#STATE OPERATIONAL ::= 2 tapeAlertTrap3 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The operation has stopped because an error has occured while reading or writing data which the drive cannot correct." --#TYPE "HP TapeAlert #3" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Read or Write Data Error" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 3 --#STATE DEGRADED ::= 3 tapeAlertTrap4 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID, currentMedia } DESCRIPTION "Your data is at risk: 1. Copy any data you require from this tape 2. Do not use this tape again 3. Restart the operation with a different tape" --#TYPE "HP TapeAlert #4" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Faulty Media [%s]" --#ARGUMENTS {0,1,2,3} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 4 --#STATE DEGRADED ::= 4 tapeAlertTrap5 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape is damaged or the drive is faulty. Call the tape drive supplier helpline." --#TYPE "HP TapeAlert #5" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device May Have Read Fault - Call Helpline" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 5 --#STATE DEGRADED ::= 5 tapeAlertTrap6 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape is from a faulty batch or the tape drive is faulty: 1. Use a good tape to test the drive. 2. If the problem persists, call the tape drive supplier helpline." --#TYPE "HP TapeAlert #6" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device May Have Write Fault - Call Helpline" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 6 --#STATE DEGRADED ::= 6 tapeAlertTrap7 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID, currentMedia } DESCRIPTION "The tape cartridge has reached the end of its calculated useful life: 1. Copy any data you need to another tape 2. Discard the old tape." --#TYPE "HP TapeAlert #7" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Worn Out Media [%s]" --#ARGUMENTS {0,1,2,3} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 7 --#STATE OPERATIONAL ::= 7 tapeAlertTrap8 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape cartridge is not data-grade. Any data you back up to the tape is at risk. Replace the cartridge with a data-grade tape." --#TYPE "HP TapeAlert #8" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Media Loaded In Tape Device Is Not Data Grade" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 8 --#STATE OPERATIONAL ::= 8 tapeAlertTrap9 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "You are trying to write to a write-protected cartridge. Remove the write-protection or use another tape." --#TYPE "HP TapeAlert #9" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Attempted Backup to Write-Protected Tape" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 9 --#STATE DEGRADED ::= 9 tapeAlertTrap10 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "You cannot eject the cartridge because the tape drive is in use. Wait until the operation is complete before ejecting the cartridge." --#TYPE "HP TapeAlert #10" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Eject Attempted When Media Locked" --#ARGUMENTS {0,1,2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 10 --#STATE OPERATIONAL ::= 10 tapeAlertTrap11 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape in the drive is a cleaning cartridge. If you want to back up or restore, insert a data-grade tape." --#TYPE "HP TapeAlert #11" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Attempted Backup/Restore To Cleaning Tape" --#ARGUMENTS {0,1,2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 11 --#STATE OPERATIONAL ::= 11 tapeAlertTrap12 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "You have tried to load a cartridge of a type which is not supported by this drive." --#TYPE "HP TapeAlert #12" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Media Loaded In Tape Device Is Unsupported Type" --#ARGUMENTS {0,1,2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 12 --#STATE OPERATIONAL ::= 12 tapeAlertTrap13 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The operation has failed because the tape in the drive has snapped: 1. Discard the old tape. 2. Restart the operation with a different tape." --#TYPE "HP TapeAlert #13" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Snapped Tape" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 13 --#STATE DEGRADED ::= 13 tapeAlertTrap14 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The operation has failed because the tape in the drive has snapped: 1. Do not attempt to extract the tape cartridge. 2. Call the tape drive supplier helpline." --#TYPE "HP TapeAlert #14" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Snapped Tape" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 14 --#STATE DEGRADED ::= 14 tapeAlertTrap15 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID, currentMedia } DESCRIPTION "The memory in the tape cartridge has failed, which reduces performance. Do not use the cartridge for further backup operations." --#TYPE "HP TapeAlert #15" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Memory Chip in Cartridge Failure [%s]" --#ARGUMENTS {0,1,2,3} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 15 --#STATE DEGRADED ::= 15 tapeAlertTrap16 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The operation has failed because the tape cartridge was manually ejected while the tape drive was actively writing or reading." --#TYPE "HP TapeAlert #16" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Cartridge Ejected While Actively Writing/Reading" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 16 --#STATE DEGRADED ::= 16 tapeAlertTrap17 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "You have loaded a cartridge of a type that is read-only in this drive. The cartridge will appear as write-protected" --#TYPE "HP TapeAlert #17" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Read Only Media" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 17 --#STATE OPERATIONAL ::= 17 tapeAlertTrap18 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The directory on the tape cartridge has been corrupted. File search performance will be degraded." --#TYPE "HP TapeAlert #18" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Corrupted Directory On Tape" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 18 --#STATE DEGRADED ::= 18 tapeAlertTrap19 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID, currentMedia } DESCRIPTION "The tape cartridge is nearing the end of its useful life. It is recommended that you: 1. Use another tape cartridge for your next backup. 2. Store this tape cartridge in a safe place in case you need to restore data from it." --#TYPE "HP TapeAlert #19" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Worn Out Media [%s]" --#ARGUMENTS {0,1,2,3} --#SEVERITY INFORMATIONAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 19 --#STATE OPERATIONAL ::= 19 tapeAlertTrap20 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape drive needs cleaning: 1. If the operation has stopped, eject the tape and clean the drive 2. If the operation has not stopped, wait for it to finish and then clean the drive. Check the tape drive users manual for device specific cleaning instructions." --#TYPE "HP TapeAlert #20" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Needs Cleaning" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 20 --#STATE DEGRADED ::= 20 tapeAlertTrap21 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape drive is due for routine cleaning: 1. Wait for the current operation to finish. 2. Then use a cleaning cartridge. Check the tape drive users manual for device specific cleaning instructions." --#TYPE "HP TapeAlert #21" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Requests Routine Cleaning" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 21 --#STATE OPERATIONAL ::= 21 tapeAlertTrap22 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The last cleaning cartridge used in the tape drive has worn out: 1. Discard the worn out cleaning cartridge. 2. Wait for the current operation to finish. 3. Then use a new cleaning cartridge." --#TYPE "HP TapeAlert #22" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Worn Out Cleaning Cartridge" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 22 --#STATE DEGRADED ::= 22 tapeAlertTrap23 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The last cleaning cartridge used in the tape drive was an invalid type: 1. Do not use this cleaning cartridge in this drive. 2. Wait for the current operation to finish. 3. Then use a valid cleaning cartridge." --#TYPE "HP TapeAlert #23" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Detected Invalid Cleaning Cartridge" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 23 --#STATE DEGRADED ::= 23 tapeAlertTrap29 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "Preventive maintenance of the tape drive is required. Check the tape drive users manual for device specific preventive maintenance tasks or call the tape drive supplier helpline." --#TYPE "HP TapeAlert #29" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Requires Preventative Maintenance" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 29 --#STATE DEGRADED ::= 29 tapeAlertTrap30 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape drive has a hardware fault: 1. Eject the tape or magazine. 2. Reset the drive. 3. Restart the operation." --#TYPE "HP TapeAlert #30" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Hardware Fault - Reset Drive" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 30 --#STATE DEGRADED ::= 30 tapeAlertTrap31 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape drive has a hardware fault: 1. Turn the tape drive off and then on again. 2. Restart the operation. 3. If the problem persists, call the tape drive supplier helpline. Check the tape drive users manual for device specific instructions on turning the device power on and off." --#TYPE "HP TapeAlert #31" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Hardware Fault - Call Helpline" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 31 --#STATE DEGRADED ::= 31 tapeAlertTrap32 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape drive has a problem with the host interface: 1. Check the cables and cable connections. 2. Restart the operation." --#TYPE "HP TapeAlert #32" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Host Interface Fault" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 32 --#STATE OPERATIONAL ::= 32 tapeAlertTrap33 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The operation has failed: 1. Eject the tape or magazine. 2. Insert the tape or magazine again. 3. Restart the operation." --#TYPE "HP TapeAlert #33" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Eject Media Request" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 33 --#STATE DEGRADED ::= 33 tapeAlertTrap34 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The firmware download has failed because you have tried to use the incorrect firmware for this tape drive. Obtain the correct firmware and try again." --#TYPE "HP TapeAlert #34" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Firmware Download Fault" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 34 --#STATE OPERATIONAL ::= 34 tapeAlertTrap35 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "Environmental conditions inside the tape drive are exceeding the humidity specifications" --#TYPE "HP TapeAlert #35" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Humidity Specification Exceeded" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 35 --#STATE DEGRADED ::= 35 tapeAlertTrap36 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "Environmental conditions inside the tape drive are exceeding the temperature specifications" --#TYPE "HP TapeAlert #36" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Temperature Specification Exceeded" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 36 --#STATE DEGRADED ::= 36 tapeAlertTrap37 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The voltage supply to the tape drive exceeds specifications" --#TYPE "HP TapeAlert #37" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Voltage Specification Exceeded" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 37 --#STATE DEGRADED ::= 37 tapeAlertTrap38 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "A hardware failure of the tape drive is predicted. Call the tape drive supplier helpline." --#TYPE "HP TapeAlert #38" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Predicted to Fail - Call Helpline" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 38 --#STATE DEGRADED ::= 38 tapeAlertTrap39 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The tape drive may have a hardware fault. Run extended diagnostics to verify and diagnose the problem. Check the tape drive users manual for device specific instructions on running extended diagnostic tests." --#TYPE "HP TapeAlert #39" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device May Have Hardware Fault - Run Diagnostics" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 39 --#STATE DEGRADED ::= 39 tapeAlertTrap40 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The changer mechanism is having difficulty communicating with the tape drive: 1. Turn the autoloader off then on. 2. Restart the operation. 3. If problem persists, call the tape drive supplier helpline." --#TYPE "HP TapeAlert #40" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Autoloader Communications Fault" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 40 --#STATE DEGRADED ::= 40 tapeAlertTrap41 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "A tape has been left in the autoloader by a previous hardware fault: 1. Insert an empty magazine to clear the fault. 2. If the fault does not clear, turn the autoloader off and then on again. 3. If the problem persists, call the tape drive supplier helpline." --#TYPE "HP TapeAlert #41" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Detects Stray Tape In Autoloader" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 41 --#STATE DEGRADED ::= 41 tapeAlertTrap42 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "There is a problem with the autoloader mechanism." --#TYPE "HP TapeAlert #42" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Autoloader Mechanism Fault" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 42 --#STATE OPERATIONAL ::= 42 tapeAlertTrap43 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The operation has failed because the autoloader door is open: 1. Clear any obstructions from the autoloader door. 2. Eject the magazine and then insert it again. 3. If the fault does not clear, turn the autoloader off and then on again. 4. If the problem persists, call the tape drive supplier helpline." --#TYPE "HP TapeAlert #43" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Tape Device Has Autoloader Door Open" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 43 --#STATE DEGRADED ::= 43 tapeAlertTrap44 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The autoloader has a hardware fault: 1. Turn the autoloader off and then on again. 2. Restart the operation. 3. If the problem persists, call the tape drive supplier helpline. Check the autoloader users manual for device specific instructions on turning the device power on and off." --#TYPE "HP TapeAlert #44" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Autoloader Has Hardware Fault - Call Helpline" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 44 --#STATE DEGRADED ::= 44 tapeAlertTrap45 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The autoloader cannot operate without the magazine. 1. Insert the magazine into the autoloader 2. Restart the operation." --#TYPE "HP TapeAlert #45" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Autoloader Cannot Operate Without Magazine" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 45 --#STATE DEGRADED ::= 45 tapeAlertTrap46 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "A hardware failure of the changer mechanism is predicted. Call the tape drive supplier helpline." --#TYPE "HP TapeAlert #46" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Autoloader Predicted to Fail - Call Helpline" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 46 --#STATE DEGRADED ::= 46 tapeAlertTrap256 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The library mechanism is having difficulty communicating with the drive: 1. Turn the library off then on. 2. Restart the operation. 3. If problem persists, call the library supplier helpline." --#TYPE "HP TapeAlert #256" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Drive Communications Fault" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 256 --#STATE DEGRADED ::= 256 tapeAlertTrap257 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "There is a problem with the library mechanism. If problem persists, call the library supplier helpline." --#TYPE "HP TapeAlert #257" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Changer Mechanism Fault" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 257 --#STATE DEGRADED ::= 257 tapeAlertTrap258 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The library has a hardware fault: 1. Reset the library 2. Restart the operation. Check the library users manual for device specific instructions on resetting the device." --#TYPE "HP TapeAlert #258" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Hardware Fault - Reset Library" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 258 --#STATE DEGRADED ::= 258 tapeAlertTrap259 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The library has a hardware fault: 1. Turn the library off and then on again. 2. Restart the operation. 3. If the problem persists, call the library supplier helpline. Check the library users manual for device specific instructions on turning the device power on and off." --#TYPE "HP TapeAlert #259" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Hardware Fault - Call Helpline" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 259 --#STATE DEGRADED ::= 259 tapeAlertTrap260 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The library mechanism may have a hardware fault. Run extended diagnostics to verify and diagnose the problem. Check the library users manual for device specific instructions on running extended diagnostic tests." --#TYPE "HP TapeAlert #260" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library May Have Hardware Fault - Run Diagnostics" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 260 --#STATE DEGRADED ::= 260 tapeAlertTrap261 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The library has a problem with the host interface: 1. Check the cables and cable connections. 2. Restart the operation." --#TYPE "HP TapeAlert #261" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Host Interface Fault" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 261 --#STATE DEGRADED ::= 261 tapeAlertTrap262 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "A hardware failure of the library is predicted. Call the library supplier helpline." --#TYPE "HP TapeAlert #262" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Predicted to Fail - Call Helpline" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 262 --#STATE DEGRADED ::= 262 tapeAlertTrap263 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "Preventative maintenance of the library is required. Check the library users manual for device specific preventative maintenance tasks, or call your library supplier helpline." --#TYPE "HP TapeAlert #263" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Requires Preventative Maintenance" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 263 --#STATE DEGRADED ::= 263 tapeAlertTrap264 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "General environmental conditions inside the library have exceeded the humidity specifications." --#TYPE "HP TapeAlert #264" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Humidity Specification Exceeded" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 264 --#STATE DEGRADED ::= 264 tapeAlertTrap265 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "General environmental conditions inside the library have exceeded the temperature specifications.e" --#TYPE "HP TapeAlert #265" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Temperature Specification Exceeded" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 265 --#STATE DEGRADED ::= 265 tapeAlertTrap266 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "he voltage supply to the library exceeds specifications. There is a potential problem with the power supply or failure of a redundant power supply" --#TYPE "HP TapeAlert #266" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Voltage Specification Exceeded" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 266 --#STATE DEGRADED ::= 266 tapeAlertTrap267 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "A cartridge has been left in a drive inside the library by a previous hardware fault: 1. Insert an empty magazine to clear the fault. 2. If the fault does not clear, turn the library off and then on again. 3. If the problem persists, call the library supplier helpline." --#TYPE "HP TapeAlert #267" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Detects Stray Tape In Drive" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 267 --#STATE DEGRADED ::= 267 tapeAlertTrap268 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "There is a potential problem with a drive ejecting cartridges short or with the library mechanism picking a cartridge from a slot. 1. No action needs to be taken at this time. 2. If the problem persists, call the library supplier helpline." --#TYPE "HP TapeAlert #268" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Problems Picking Cartridge from Slot" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 268 --#STATE DEGRADED ::= 268 tapeAlertTrap269 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "There is a potential problem with the library mechanism placing a cartridge into a slot 1. No action needs to be taken at this time. 2. If the problem persists, call the library supplier helpline." --#TYPE "HP TapeAlert #269" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Problems Placing Cartridge into Slot" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 269 --#STATE DEGRADED ::= 269 tapeAlertTrap270 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "There is a potential problem with a drive or the library mechanism loading cartridges, or an incompatible cartridge." --#TYPE "HP TapeAlert #270" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Problems Loading Cartridge into Drive" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 270 --#STATE DEGRADED ::= 270 tapeAlertTrap271 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The operation has failed because the library door is open: 1. Clear any obstructions from the library door. 2. Close the library door. 3. If the problem persists, call the library supplier helpline." --#TYPE "HP TapeAlert #271" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Door is Open" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 271 --#STATE DEGRADED ::= 271 tapeAlertTrap272 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "There is a mechanical problem with the library media import/export mailslot." --#TYPE "HP TapeAlert #272" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Mechanical Fault with Mailslot" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 272 --#STATE DEGRADED ::= 272 tapeAlertTrap273 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The library cannot operate without the magazine. 1. Insert the magazine into the library 2. Restart the operation." --#TYPE "HP TapeAlert #273" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Cannot Operate Without Magazine" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 273 --#STATE DEGRADED ::= 273 tapeAlertTrap274 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "Library security has been compromised" --#TYPE "HP TapeAlert #274" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Security Has Been Compromised" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 274 --#STATE DEGRADED ::= 274 tapeAlertTrap275 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The security mode of the library has been changed. The library has either been put into secure mode, or the library has exited the secure mode. This is for information purposes only. No action is required." --#TYPE "HP TapeAlert #275" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Security Mode Changed" --#ARGUMENTS {0,1,2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 275 --#STATE DEGRADED ::= 275 tapeAlertTrap276 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The library has been manually turned offline and is unavailable for use." --#TYPE "HP TapeAlert #276" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Manually Turned Offline" --#ARGUMENTS {0,1,2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 276 --#STATE DEGRADED ::= 276 tapeAlertTrap277 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "A drive inside the library has been taken offline. This is for information purposes only. No action is required." --#TYPE "HP TapeAlert #277" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Drive Turned Offline" --#ARGUMENTS {0,1,2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 277 --#STATE DEGRADED ::= 277 tapeAlertTrap278 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "There is a potential problem with the barcode label or the scanner hardware in the library mechanism. 1. No action needs to be taken at this time. 2. If the problem persists, call the library supplier helpline." --#TYPE "HP TapeAlert #278" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Has Problems Reading Barcode Labels" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 278 --#STATE DEGRADED ::= 278 tapeAlertTrap279 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "The library has detected a inconsistency in its inventory. 1. Redo the library inventory to correct inconsistency. 2. Restart the operation Check the applications users manual or the hardware users manual for specific instructions on redoing the library inventory." --#TYPE "HP TapeAlert #279" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Library Inventory is Inconsistent" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 279 --#STATE DEGRADED ::= 279 tapeAlertTrap280 TRAP-TYPE ENTERPRISE tapeAlert VARIABLES { hbaNumber, hbaChannel, driveScsiID } DESCRIPTION "A library operation has been attempted that is invalid at this time." --#TYPE "HP TapeAlert #280" --#SUMMARY "Hba%d:Channel%d:ScsiID%d Invalid Library Operation Attempted" --#ARGUMENTS {0,1,2} --#SEVERITY MINOR --#TIMEINDEX 9 --#HELP "ta_traps.hlp" --#HELPTAG 280 --#STATE DEGRADED ::= 280 END