TIMETRA-WEB-PORTAL-PROTOCOL-MIB DEFINITIONS ::= BEGIN IMPORTS Unsigned32, Gauge32, Counter32, MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TimeStamp, DisplayString, TruthValue, MacAddress FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB timetraSRMIBModules, tmnxSRObjs, tmnxSRConfs, tmnxSRNotifyPrefix FROM TIMETRA-GLOBAL-MIB TItemDescription, TNamedItem, TNamedItemOrEmpty, TmnxVRtrID, TmnxVRtrIDOrZero, TmnxServId, TmnxAdminState FROM TIMETRA-TC-MIB svcId, iesIfIndex FROM TIMETRA-SERV-MIB vRtrID, vRtrIfIndex FROM TIMETRA-VRTR-MIB ; timetraWppMIBModule MODULE-IDENTITY LAST-UPDATED "201202281200Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Alcatel-Lucent 7xxx Support Web: http://www.alcatel-lucent.com/wps/portal/Support" DESCRIPTION "This document is the SNMP MIB module to manage and provision the Web Portal Protocol for the Alcatel-Lucent 7xxx device. Copyright 2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "201202281200Z" DESCRIPTION "Rev 10.0 28 Februari 2012 12:00 10.0 release of the TIMETRA-WEB-PORTAL-PROTOCOL-MIB.mib." ::= { timetraSRMIBModules 80 } -- ---------------------------------------------------------------------------- -- Alcatel-Lucent 7xxx series WPP MIB structure -- ---------------------------------------------------------------------------- tmnxWpp OBJECT IDENTIFIER ::= { tmnxSRObjs 80 } tmnxWppObjs OBJECT IDENTIFIER ::= { tmnxWpp 1 } tmnxWppNotificationObjs OBJECT IDENTIFIER ::= { tmnxWpp 2 } tmnxWppConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 80 } tmnxWppCompliances OBJECT IDENTIFIER ::= { tmnxWppConformance 1 } tmnxWppGroups OBJECT IDENTIFIER ::= { tmnxWppConformance 2 } tmnxWppNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 80 } tmnxWppNotifications OBJECT IDENTIFIER ::= { tmnxWppNotifyPrefix 0 } -- -- Subtrees -- tmnxWppPortalObjs OBJECT IDENTIFIER ::= { tmnxWppObjs 1 } -- ---------------------------------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------------------------------- TmnxWppStatsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxWppStatsType data type is an enumerated integer that describes the values used to identify the WPP statistics." SYNTAX INTEGER { event (1), droppedMsgType (2), acceptedMsgType (3), originalTransmittedMsgType (4), retransmittedMsgType (5) } TmnxWppUserName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The data type TmnxWppUserName represents the user name of a WPP host." SYNTAX DisplayString (SIZE (0..253)) -- ---------------------------------------------------------------------------- -- -- The Web Portal Protocol Table -- tmnxWppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxWppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxWppTable allows configuration of the Web Portal Protocol (WPP) in a virtual router instance." ::= { tmnxWppObjs 2 } tmnxWppEntry OBJECT-TYPE SYNTAX TmnxWppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the configuration for WPP in a particular virtual router instance. Entries in this table can be created and deleted via SNMP SET operations to tmnxWppRowStatus. A corresponding row in the TIMETRA-VRTR-MIB::vRtrConfTable must exist in order to create a row in this table." INDEX { vRtrID } ::= { tmnxWppTable 1 } TmnxWppEntry ::= SEQUENCE { tmnxWppRowStatus RowStatus, tmnxWppLastCh TimeStamp, tmnxWppAdminState TmnxAdminState } tmnxWppRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppRowStatus controls the creation and deletion of rows in the table." ::= { tmnxWppEntry 1 } tmnxWppLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this WPP portal." ::= { tmnxWppEntry 2 } tmnxWppAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppAdminState specifies the administrative state of the WPP in this virtual router instance." DEFVAL { outOfService } ::= { tmnxWppEntry 3 } -- -- The WPP statistics Table -- tmnxWppStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxWppStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxWppStatsTable shows WPP statistics." ::= { tmnxWppObjs 3 } tmnxWppStatsEntry OBJECT-TYPE SYNTAX TmnxWppStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents protocol statistics of a specific type. Entries in this table are created and destroyed by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table." INDEX { vRtrID, tmnxWppStatsType, tmnxWppStatsInstance } ::= { tmnxWppStatsTable 1 } TmnxWppStatsEntry ::= SEQUENCE { tmnxWppStatsType TmnxWppStatsType, tmnxWppStatsInstance Unsigned32, tmnxWppStatsName DisplayString, tmnxWppStatsVal Counter32 } tmnxWppStatsType OBJECT-TYPE SYNTAX TmnxWppStatsType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxWppStatsType indicates the type of WPP statistics contained in this conceptual row." ::= { tmnxWppStatsEntry 1 } tmnxWppStatsInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxWppStatsType indicates the instance identifier of the statistics contained in this conceptual row. Together with the value of tmnxWppStatsType it indicates unambiguously what the value of tmnxWppStatsVal means. For example: if the value of the object tmnxWppStatsType is equal to 'event', the value of tmnxWppStatsInstance indicates the identifier of the type of event that this conceptual row refers to, for example 'noResources', and the value of tmnxWppStatsVal indicates the number of times a 'no resources' event occurred for this WPP portal." ::= { tmnxWppStatsEntry 2 } tmnxWppStatsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxWppStatsType indicates the human-readable identifier of the statistics contained in this conceptual row. In the same example, the value of tmnxWppStatsName is '(SCCRP) Start-Control-Connection-Reply'." ::= { tmnxWppStatsEntry 3 } tmnxWppStatsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxWppStatsType indicates the value of the statistics contained in this conceptual row." ::= { tmnxWppStatsEntry 4 } -- -- The WPP Portal Table -- tmnxWppPortalTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxWppPortalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxWppPortalTable contains objects to configure the WPP portals of this system." ::= { tmnxWppPortalObjs 1 } tmnxWppPortalEntry OBJECT-TYPE SYNTAX TmnxWppPortalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents information about a particular WPP portal. Entries in this table can be created or deleted via SNMP operations. In order to create a conceptual row in this table, a row in the tmnxWppTable with the same value of the object vRtrID must exist." INDEX { vRtrID, IMPLIED tmnxWppPortalName } ::= { tmnxWppPortalTable 1 } TmnxWppPortalEntry ::= SEQUENCE { tmnxWppPortalName TNamedItem, tmnxWppPortalLastCh TimeStamp, tmnxWppPortalRowStatus RowStatus, tmnxWppPortalAddrType InetAddressType, tmnxWppPortalAddr InetAddress, tmnxWppPortalAdminState TmnxAdminState } tmnxWppPortalName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxWppPortalName specifies the name of this WPP portal." ::= { tmnxWppPortalEntry 1 } tmnxWppPortalLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppPortalLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxWppPortalEntry 2 } tmnxWppPortalRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppPortalRowStatus specifies the row status of this row." ::= { tmnxWppPortalEntry 3 } tmnxWppPortalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppPortalAddrType specifies the address type of tmnxWppPortalAddr. The only value supported is 'ipv4'. A value for this object must be specified when the row is created." ::= { tmnxWppPortalEntry 4 } tmnxWppPortalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppPortalAddr specifies the IP address of the WPP portal. Only IPv4 addresses are supported. A value for this object must be specified when the row is created." ::= { tmnxWppPortalEntry 5 } tmnxWppPortalAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppPortalAdminState specifies the administrative state of this WPP portal." DEFVAL { outOfService } ::= { tmnxWppPortalEntry 6 } -- -- The WPP Portal status Table -- tmnxWppPortalStatTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxWppPortalStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxWppPortalStatTable contains objects to monitor the WPP portals of this system." ::= { tmnxWppPortalObjs 2 } tmnxWppPortalStatEntry OBJECT-TYPE SYNTAX TmnxWppPortalStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents status information about a particular WPP portal. Entries in this table are created and destroyed automatically by the system." AUGMENTS { tmnxWppPortalEntry } ::= { tmnxWppPortalStatTable 1 } TmnxWppPortalStatEntry ::= SEQUENCE { tmnxWppPortalStateControlledRtr TmnxVRtrIDOrZero, tmnxWppPortalStateNumInterfaces Gauge32 } tmnxWppPortalStateControlledRtr OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppPortalStateControlledRtr indicates the identifier of the virtual router instance being controlled by this portal. The value zero indicates that this portal is currently not controlling any router instance." ::= { tmnxWppPortalStatEntry 1 } tmnxWppPortalStateNumInterfaces OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppPortalStateNumInterfaces indicates the number of interfaces associated with this portal that are administratively enabled." ::= { tmnxWppPortalStatEntry 2 } -- -- The WPP Portal statistics Table -- tmnxWppPortalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxWppPortalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxWppPortalStatsTable shows protocol statistics information of WPP portals." ::= { tmnxWppPortalObjs 3 } tmnxWppPortalStatsEntry OBJECT-TYPE SYNTAX TmnxWppPortalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents protocol statistics of a specific type. Entries in this table are created and destroyed by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table." INDEX { vRtrID, tmnxWppPortalName, tmnxWppPortalStatsType, tmnxWppPortalStatsInstance } ::= { tmnxWppPortalStatsTable 1 } TmnxWppPortalStatsEntry ::= SEQUENCE { tmnxWppPortalStatsType TmnxWppStatsType, tmnxWppPortalStatsInstance Unsigned32, tmnxWppPortalStatsName DisplayString, tmnxWppPortalStatsVal Counter32 } tmnxWppPortalStatsType OBJECT-TYPE SYNTAX TmnxWppStatsType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxWppPortalStatsType indicates the type of WPP statistics contained in this conceptual row." ::= { tmnxWppPortalStatsEntry 1 } tmnxWppPortalStatsInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxWppPortalStatsType indicates the instance identifier of the statistics contained in this conceptual row. Together with the value of tmnxWppPortalStatsType it indicates unambiguously what the value of tmnxWppPortalStatsVal means. For example: if the value of the object tmnxWppPortalStatsType is equal to 'event', the value of tmnxWppPortalStatsInstance indicates the identifier of the type of event that this conceptual row refers to, for example 'noResources', and the value of tmnxWppPortalStatsVal indicates the number of times a 'no resources' event occurred for this WPP portal." ::= { tmnxWppPortalStatsEntry 2 } tmnxWppPortalStatsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxWppPortalStatsType indicates the human-readable identifier of the statistics contained in this conceptual row. In the same example, the value of tmnxWppPortalStatsName is '(SCCRP) Start-Control-Connection-Reply'." ::= { tmnxWppPortalStatsEntry 3 } tmnxWppPortalStatsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxWppPortalStatsType indicates the value of the statistics contained in this conceptual row." ::= { tmnxWppPortalStatsEntry 4 } -- -- The WPP Host Table -- tmnxWppHostTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxWppHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxWppHostTable contains status information about WPP hosts." ::= { tmnxWppPortalObjs 4 } tmnxWppHostEntry OBJECT-TYPE SYNTAX TmnxWppHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents information about a particular WPP host. Entries in this table are created and destroyed automatically by the system." INDEX { vRtrID, tmnxWppPortalName, tmnxWppHostAddrType, tmnxWppHostAddr } ::= { tmnxWppHostTable 1 } TmnxWppHostEntry ::= SEQUENCE { tmnxWppHostAddrType InetAddressType, tmnxWppHostAddr InetAddress, tmnxWppHostStatus INTEGER, tmnxWppHostSerialNumber Unsigned32, tmnxWppHostRequestId Unsigned32, tmnxWppHostPortalRemotePort InetPortNumber, tmnxWppHostPortalLclIpAddrType InetAddressType, tmnxWppHostPortalLclIpAddr InetAddress, tmnxWppHostUserName TmnxWppUserName, tmnxWppHostService TmnxServId, tmnxWppHostMacAddress MacAddress } tmnxWppHostAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxWppHostAddrType specifies the address type of tmnxWppHostAddr." ::= { tmnxWppHostEntry 1 } tmnxWppHostAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxWppHostAddr specifies the IP address of the WPP host." ::= { tmnxWppHostEntry 2 } tmnxWppHostStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), challenged (2), authenticating (3), authenticated (4), established (5), loggingOut (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostStatus indicates the state of the WPP host." ::= { tmnxWppHostEntry 3 } tmnxWppHostSerialNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostSerialNumber indicates the serial number of the WPP host. The value zero indicates that the serial number is unknown or irrelevant." ::= { tmnxWppHostEntry 4 } tmnxWppHostRequestId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostRequestId indicates the request ID of the WPP host. The value zero indicates that the request ID is unknown or irrelevant." ::= { tmnxWppHostEntry 5 } tmnxWppHostPortalRemotePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostPortalRemotePort indicates the UDP source port used by the portal while sending WPP protocol messages about this host to this system. The value zero indicates that the port is not yet known." ::= { tmnxWppHostEntry 6 } tmnxWppHostPortalLclIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostPortalLclIpAddrType indicates the address type of tmnxWppHostPortalLclIpAddr." ::= { tmnxWppHostEntry 7 } tmnxWppHostPortalLclIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostPortalLclIpAddr indicates the destination IP address used by the portal while sending WPP protocol messages about this host to this system." ::= { tmnxWppHostEntry 8 } tmnxWppHostUserName OBJECT-TYPE SYNTAX TmnxWppUserName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostUserName indicates the WPP user name of this WPP host." ::= { tmnxWppHostEntry 9 } tmnxWppHostService OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostService indicates the service ID of the service to which this WPP host belongs." ::= { tmnxWppHostEntry 10 } tmnxWppHostMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppHostMacAddress indicates the MAC address of this WPP host." ::= { tmnxWppHostEntry 11 } -- -- The IES Group Interface WPP Table -- tmnxWppIfTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxWppIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxWppIfTable contains objects to configure the WPP for the IES group interfaces of this system." ::= { tmnxWppObjs 4 } tmnxWppIfEntry OBJECT-TYPE SYNTAX TmnxWppIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents WPP information about a particular IES group interface. Entries in this table can be created or deleted via SNMP operations. In order to create a conceptual row in this table, a row in the TIMETRA-SERV-MIB::iesGrpIfTable with the same index must exist." INDEX { svcId, iesIfIndex } ::= { tmnxWppIfTable 1 } TmnxWppIfEntry ::= SEQUENCE { tmnxWppIfLastCh TimeStamp, tmnxWppIfRowStatus RowStatus, tmnxWppIfAdminState TmnxAdminState, tmnxWppIfPortalRouter TmnxVRtrIDOrZero, tmnxWppIfPortalName TNamedItemOrEmpty, tmnxWppIfSubProfile TNamedItemOrEmpty, tmnxWppIfSLAProfile TNamedItemOrEmpty, tmnxWppIfAppProfile TNamedItemOrEmpty, tmnxWppIfRestoreDisconnected TruthValue } tmnxWppIfLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxWppIfLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxWppIfEntry 1 } tmnxWppIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppIfRowStatus specifies the row status of this row." ::= { tmnxWppIfEntry 2 } tmnxWppIfAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppIfAdminState specifies the administrative state of the WPP for hosts using this IES group interface." DEFVAL { outOfService } ::= { tmnxWppIfEntry 3 } tmnxWppIfPortalRouter OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppIfPortalName specifies the virtual router instance ID of the WPP portal for the hosts using this IES group interface." DEFVAL { 0 } ::= { tmnxWppIfEntry 4 } tmnxWppIfPortalName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppIfPortalName specifies the name of the WPP portal for the hosts using this IES group interface." DEFVAL { ''H } ::= { tmnxWppIfEntry 5 } tmnxWppIfSubProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppIfSubProfile specifies the initial subscriber profile, to be used during the WPP authentication phase of hosts using this IES group interface." DEFVAL { ''H } ::= { tmnxWppIfEntry 6 } tmnxWppIfSLAProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppIfSLAProfile specifies the initial SLA profile, to be used during the WPP authentication phase of hosts using this IES group interface." DEFVAL { ''H } ::= { tmnxWppIfEntry 7 } tmnxWppIfAppProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppIfAppProfile specifies the initial application profile, to be used during the WPP authentication phase of hosts using this IES group interface. The application profile is configured in TIMETRA-BSX-NG-MIB.mib::tmnxBsxAppProfTable." DEFVAL { ''H } ::= { tmnxWppIfEntry 8 } tmnxWppIfRestoreDisconnected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxWppIfRestoreDisconnected specifies if the initial profiles must be restored after a host has disconnected." DEFVAL { true } ::= { tmnxWppIfEntry 9 } -- -------------------------------------------------------- -- WPP scalar objects -- -------------------------------------------------------- tmnxWppTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxWppTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxWppTable." ::= { tmnxWppObjs 100 } tmnxWppPortalTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxWppPortalTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxWppPortalTable." ::= { tmnxWppObjs 101 } tmnxWppIfTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxWppIfTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxWppIfTable." ::= { tmnxWppObjs 102 } -- Notification objects tmnxWppNotifyDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object tmnxWppNotifyDescription is a printable character string." ::= { tmnxWppNotificationObjs 1 } -- Notifications tmnxWppPortalStatChanged NOTIFICATION-TYPE OBJECTS { tmnxWppPortalStateControlledRtr, tmnxWppPortalStateNumInterfaces } STATUS current DESCRIPTION "[CAUSE] The tmnxWppPortalStatChanged notification is sent when the value of one of the objects in the tmnxWppPortalStatTable changes. [EFFECT] No effect on the service. [RECOVERY] No recovery required." ::= { tmnxWppNotifications 1} tmnxWppHostAuthenticationFailed NOTIFICATION-TYPE OBJECTS { tmnxWppHostStatus, tmnxWppNotifyDescription } STATUS current DESCRIPTION "[CAUSE] The tmnxWppHostAuthenticationFailed notification is sent when a WPP host could not be authenticated. More detailed information is supplied in the object tmnxWppNotifyDescription. [EFFECT] The corresponding row in the tmnxWppHostTable disappears if the value of the object tmnxWppIfRestoreDisconnected is equal to 'false'; otherwise, the value of the object tmnxWppHostStatus is set to 'idle'. [RECOVERY] The recovery action will depend on the exact failure cause, as given by the value of tmnxWppNotifyDescription." ::= { tmnxWppNotifications 2} -- ---------------------------------------------------------------------------- -- Conformance Groups -- ---------------------------------------------------------------------------- tmnxWppGroup OBJECT-GROUP OBJECTS { tmnxWppRowStatus, tmnxWppLastCh, tmnxWppAdminState, tmnxWppStatsName, tmnxWppStatsVal, tmnxWppPortalLastCh, tmnxWppPortalRowStatus, tmnxWppPortalAddrType, tmnxWppPortalAddr, tmnxWppPortalAdminState, tmnxWppPortalStateControlledRtr, tmnxWppPortalStateNumInterfaces, tmnxWppPortalStatsName, tmnxWppPortalStatsVal, tmnxWppHostStatus, tmnxWppHostSerialNumber, tmnxWppHostRequestId, tmnxWppHostPortalRemotePort, tmnxWppHostPortalLclIpAddrType, tmnxWppHostPortalLclIpAddr, tmnxWppHostUserName, tmnxWppHostService, tmnxWppHostMacAddress, tmnxWppIfLastCh, tmnxWppIfRowStatus, tmnxWppIfAdminState, tmnxWppIfPortalRouter, tmnxWppIfPortalName, tmnxWppIfSubProfile, tmnxWppIfSLAProfile, tmnxWppIfAppProfile, tmnxWppIfRestoreDisconnected, tmnxWppTableLastCh, tmnxWppPortalTableLastCh, tmnxWppIfTableLastCh } STATUS current DESCRIPTION "The group of objects for the management of the Web Portal Protocol (WPP) on Alcatel-Lucent SROS series systems." ::= { tmnxWppGroups 1 } tmnxWppNotifyObjsGroup OBJECT-GROUP OBJECTS { tmnxWppNotifyDescription } STATUS current DESCRIPTION "The group of notification objects supporting NAT notifications on Alcatel-Lucent SROS series systems." ::= { tmnxWppGroups 99 } -- ---------------------- -- NOTIFICATION-GROUPS -- ---------------------- tmnxWppNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxWppPortalStatChanged, tmnxWppHostAuthenticationFailed } STATUS current DESCRIPTION "The group of notifications supporting WPP on Alcatel-Lucent SROS series systems." ::= { tmnxWppGroups 100 } -- ---------------------------------------------------------------------------- -- Compliance information -- ---------------------------------------------------------------------------- tmnxWppCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of Web Portal Protocol on Alcatel-Lucent 7xxx series systems." MODULE -- this module MANDATORY-GROUPS { tmnxWppGroup } ::= { tmnxWppCompliances 1 } tmnxWppNotifyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Web Portal Protocol notifications on Alcatel-Lucent SROS series systems." MODULE -- this module MANDATORY-GROUPS { tmnxWppNotifyGroup } ::= { tmnxWppCompliances 2 } END