-- file automatically created


TELDAT-TRAP-R2-MIB DEFINITIONS ::= BEGIN


IMPORTS
	MODULE-IDENTITY,OBJECT-TYPE,OBJECT-IDENTITY,NOTIFICATION-TYPE,Integer32,IpAddress
		FROM SNMPv2-SMI
	DisplayString
		FROM SNMPv2-TC
	telEventTraps
		FROM TELDAT-MIB;


r2TrapsMIB MODULE-IDENTITY
    LAST-UPDATED "201401200930Z"
    ORGANIZATION "Teldat, S.A."
    CONTACT-INFO 
        "Teldat, S.A.
        Customer Service

        Postal: Parque Tecnologico de Madrid
                Tres Cantos 28760
                Madrid, SPAIN

        Tel.: +34 918 076 565

        http://www.teldat.com"
    DESCRIPTION
        "This Module Information Base file is defined for managing received
        SNMP notifications generated by the R2 event subsystem."
    REVISION "201401200930Z"
    DESCRIPTION "Initial implementation"
        ::= { telEventTraps 100 }


r2EventsGroup	OBJECT IDENTIFIER	::= { r2TrapsMIB 1 }

r2Notifications	OBJECT IDENTIFIER	::= { r2TrapsMIB 2 }
r2NotificationsPrefix	OBJECT IDENTIFIER	::= { r2Notifications 0 }

r2EventObjects1 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.1
        Message generated for each event received on the state machine that
        shows the effect produced."
    ::= { r2EventsGroup 1 }

r21Event OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'event' in event R2.1"
    ::= { r2EventObjects1 1 }

r21Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.1"
    ::= { r2EventObjects1 2 }

r21Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.1"
    ::= { r2EventObjects1 3 }

r2EventObjects2 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.2
        Message generated for each change on multiframe alignment detection."
    ::= { r2EventsGroup 2 }

r22Message OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'message' in event R2.2"
    ::= { r2EventObjects2 1 }

r22Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.2"
    ::= { r2EventObjects2 2 }

r22Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.2"
    ::= { r2EventObjects2 3 }

r2EventObjects3 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.3
        Message generated for each change on the alarm bit."
    ::= { r2EventsGroup 3 }

r23Message OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'message' in event R2.3"
    ::= { r2EventObjects3 1 }

r23Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.3"
    ::= { r2EventObjects3 2 }

r23Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.3"
    ::= { r2EventObjects3 3 }

r2EventObjects4 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.4
        Command sent to the r2 api"
    ::= { r2EventsGroup 4 }

r24Command OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'command' in event R2.4"
    ::= { r2EventObjects4 1 }

r24Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.4"
    ::= { r2EventObjects4 2 }

r24Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.4"
    ::= { r2EventObjects4 3 }

r2EventObjects5 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.5
        Error in r2 channel"
    ::= { r2EventsGroup 5 }

r25Error OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'error' in event R2.5"
    ::= { r2EventObjects5 1 }

r25Context OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'context' in event R2.5"
    ::= { r2EventObjects5 2 }

r25Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.5"
    ::= { r2EventObjects5 3 }

r25Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.5"
    ::= { r2EventObjects5 4 }

r2EventObjects6 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.6
        Phase changed in mfc r2 protocol"
    ::= { r2EventsGroup 6 }

r26OldState OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'oldState' in event R2.6"
    ::= { r2EventObjects6 1 }

r26NewState OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'newState' in event R2.6"
    ::= { r2EventObjects6 2 }

r26Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.6"
    ::= { r2EventObjects6 3 }

r26Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.6"
    ::= { r2EventObjects6 4 }

r2EventObjects7 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.7
        Phase changed in mfc r2 protocol"
    ::= { r2EventsGroup 7 }

r27OldState OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'oldState' in event R2.7"
    ::= { r2EventObjects7 1 }

r27NewState OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'newState' in event R2.7"
    ::= { r2EventObjects7 2 }

r27Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.7"
    ::= { r2EventObjects7 3 }

r27Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.7"
    ::= { r2EventObjects7 4 }

r2EventObjects8 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.8
        MFC signal sent or received"
    ::= { r2EventsGroup 8 }

r28Signal OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'signal' in event R2.8"
    ::= { r2EventObjects8 1 }

r28Received OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'received' in event R2.8"
    ::= { r2EventObjects8 2 }

r28Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.8"
    ::= { r2EventObjects8 3 }

r28Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.8"
    ::= { r2EventObjects8 4 }

r2EventObjects9 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event R2.9
        MFC signal sent or received"
    ::= { r2EventsGroup 9 }

r29Received OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'received' in event R2.9"
    ::= { r2EventObjects9 1 }

r29A OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'a' in event R2.9"
    ::= { r2EventObjects9 2 }

r29B OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'b' in event R2.9"
    ::= { r2EventObjects9 3 }

r29C OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'c' in event R2.9"
    ::= { r2EventObjects9 4 }

r29D OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'd' in event R2.9"
    ::= { r2EventObjects9 5 }

r29Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event R2.9"
    ::= { r2EventObjects9 6 }

r29Channel OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'channel' in event R2.9"
    ::= { r2EventObjects9 7 }


r2Notification1 NOTIFICATION-TYPE
    OBJECTS { 
              r21Event, 
              r21Interface,
              r21Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.1

        Message: 'Event received on state machine: $1 on $2$3'

        Parameters list:
              $1: r21Event
              $2: r21Interface
              $3: r21Channel

        Message generated for each event received on the state machine that
        shows the effect produced."
    ::= { r2NotificationsPrefix 1 }

r2Notification2 NOTIFICATION-TYPE
    OBJECTS { 
              r22Message, 
              r22Interface,
              r22Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.2

        Message: 'Multiframe alignment change detected: $1 on $2:$3'

        Parameters list:
              $1: r22Message
              $2: r22Interface
              $3: r22Channel

        Message generated for each change on multiframe alignment detection."
    ::= { r2NotificationsPrefix 2 }

r2Notification3 NOTIFICATION-TYPE
    OBJECTS { 
              r23Message, 
              r23Interface,
              r23Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.3

        Message: 'Alarm: $1 on $2:$3'

        Parameters list:
              $1: r23Message
              $2: r23Interface
              $3: r23Channel

        Message generated for each change on the alarm bit."
    ::= { r2NotificationsPrefix 3 }

r2Notification4 NOTIFICATION-TYPE
    OBJECTS { 
              r24Command, 
              r24Interface,
              r24Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.4

        Message: 'Command: $1 sent to $2:$3'

        Parameters list:
              $1: r24Command
              $2: r24Interface
              $3: r24Channel

        Command sent to the r2 api"
    ::= { r2NotificationsPrefix 4 }

r2Notification5 NOTIFICATION-TYPE
    OBJECTS { 
              r25Error, 
              r25Context,
              r25Interface,
              r25Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.5

        Message: 'Error $1 context $2 on $3:$4'

        Parameters list:
              $1: r25Error
              $2: r25Context
              $3: r25Interface
              $4: r25Channel

        Error in r2 channel"
    ::= { r2NotificationsPrefix 5 }

r2Notification6 NOTIFICATION-TYPE
    OBJECTS { 
              r26OldState, 
              r26NewState,
              r26Interface,
              r26Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.6

        Message: 'MFC phase change $1->$2 on $3:$4'

        Parameters list:
              $1: r26OldState
              $2: r26NewState
              $3: r26Interface
              $4: r26Channel

        Phase changed in mfc r2 protocol"
    ::= { r2NotificationsPrefix 6 }

r2Notification7 NOTIFICATION-TYPE
    OBJECTS { 
              r27OldState, 
              r27NewState,
              r27Interface,
              r27Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.7

        Message: 'MFC state change $1->$2 on $3:$4'

        Parameters list:
              $1: r27OldState
              $2: r27NewState
              $3: r27Interface
              $4: r27Channel

        Phase changed in mfc r2 protocol"
    ::= { r2NotificationsPrefix 7 }

r2Notification8 NOTIFICATION-TYPE
    OBJECTS { 
              r28Signal, 
              r28Received,
              r28Interface,
              r28Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.8

        Message: 'MFC $1 signal $2 on $3:$4'

        Parameters list:
              $1: r28Signal
              $2: r28Received
              $3: r28Interface
              $4: r28Channel

        MFC signal sent or received"
    ::= { r2NotificationsPrefix 8 }

r2Notification9 NOTIFICATION-TYPE
    OBJECTS { 
              r29Received, 
              r29A,
              r29B,
              r29C,
              r29D,
              r29Interface,
              r29Channel 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event R2.9

        Message: 'ABCD signal $1 $2$3$4$5 on $6:$7'

        Parameters list:
              $1: r29Received
              $2: r29A
              $3: r29B
              $4: r29C
              $5: r29D
              $6: r29Interface
              $7: r29Channel

        MFC signal sent or received"
    ::= { r2NotificationsPrefix 9 }


END