-- file automatically created


TELDAT-TRAP-I101-MIB DEFINITIONS ::= BEGIN


IMPORTS
	MODULE-IDENTITY,OBJECT-TYPE,OBJECT-IDENTITY,NOTIFICATION-TYPE,Integer32,IpAddress
		FROM SNMPv2-SMI
	DisplayString
		FROM SNMPv2-TC
	telEventTraps
		FROM TELDAT-MIB;


i101TrapsMIB MODULE-IDENTITY
    LAST-UPDATED "201401200930Z"
    ORGANIZATION "Teldat, S.A."
    CONTACT-INFO 
        "Teldat, S.A.
        Customer Service

        Postal: Parque Tecnologico de Madrid
                Tres Cantos 28760
                Madrid, SPAIN

        Tel.: +34 918 076 565

        http://www.teldat.com"
    DESCRIPTION
        "This Module Information Base file is defined for managing received
        SNMP notifications generated by the I101 event subsystem."
    REVISION "201401200930Z"
    DESCRIPTION "Initial implementation"
        ::= { telEventTraps 229 }


i101EventsGroup	OBJECT IDENTIFIER	::= { i101TrapsMIB 1 }

i101Notifications	OBJECT IDENTIFIER	::= { i101TrapsMIB 2 }
i101NotificationsPrefix	OBJECT IDENTIFIER	::= { i101Notifications 0 }

i101EventObjects1 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.1
        Data has been received from Serial Terminal."
    ::= { i101EventsGroup 1 }

i1011BytesNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'bytesNumber' in event I101.1"
    ::= { i101EventObjects1 1 }

i1011Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.1"
    ::= { i101EventObjects1 2 }

i101EventObjects2 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.2
        One OK Message has been received from Serial Terminal."
    ::= { i101EventsGroup 2 }

i1012Coment OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'coment' in event I101.2"
    ::= { i101EventObjects2 1 }

i1012SerrialAddress OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'serrialAddress' in event I101.2"
    ::= { i101EventObjects2 2 }

i1012BytesNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'bytesNumber' in event I101.2"
    ::= { i101EventObjects2 3 }

i1012Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.2"
    ::= { i101EventObjects2 4 }

i101EventObjects3 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.3
        One Bad Message has been received from Serial Terminal."
    ::= { i101EventsGroup 3 }

i1013Cause OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'cause' in event I101.3"
    ::= { i101EventObjects3 1 }

i1013Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.3"
    ::= { i101EventObjects3 2 }

i101EventObjects4 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.4
        A message with LRC/CRC error has been received from Serial Terminal."
    ::= { i101EventsGroup 4 }

i1014Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.4"
    ::= { i101EventObjects4 1 }

i101EventObjects5 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.5
        A Message has been transmitted to Serial Terminal."
    ::= { i101EventsGroup 5 }

i1015Bytes OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'bytes' in event I101.5"
    ::= { i101EventObjects5 1 }

i1015Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.5"
    ::= { i101EventObjects5 2 }

i101EventObjects6 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.6
        A change ON/OFF has been detected in Serial Control Signal Input."
    ::= { i101EventsGroup 6 }

i1016MessageType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'messageType' in event I101.6"
    ::= { i101EventObjects6 1 }

i1016Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.6"
    ::= { i101EventObjects6 2 }

i101EventObjects7 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.7
        A change ON/OFF has been make in Serial Control Signal Output."
    ::= { i101EventsGroup 7 }

i1017MessageType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'messageType' in event I101.7"
    ::= { i101EventObjects7 1 }

i1017Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.7"
    ::= { i101EventObjects7 2 }

i101EventObjects8 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.8
        Data error from Serial Terminal has been received."
    ::= { i101EventsGroup 8 }

i1018MessageType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'messageType' in event I101.8"
    ::= { i101EventObjects8 1 }

i1018Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.8"
    ::= { i101EventObjects8 2 }

i101EventObjects9 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.9
        Detailed Data send to serial interface."
    ::= { i101EventsGroup 9 }

i1019Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.9"
    ::= { i101EventObjects9 1 }

i1019SerialAddress OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'serialAddress' in event I101.9"
    ::= { i101EventObjects9 2 }

i1019Lenght OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'lenght' in event I101.9"
    ::= { i101EventObjects9 3 }

i1019HexData OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'hexData' in event I101.9"
    ::= { i101EventObjects9 4 }

i101EventObjects10 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.10
        Detailed Data received from serial interface."
    ::= { i101EventsGroup 10 }

i10110Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.10"
    ::= { i101EventObjects10 1 }

i10110SerialAddress OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'serialAddress' in event I101.10"
    ::= { i101EventObjects10 2 }

i10110Lenght OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'lenght' in event I101.10"
    ::= { i101EventObjects10 3 }

i10110HexData OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'hexData' in event I101.10"
    ::= { i101EventObjects10 4 }

i101EventObjects11 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.11
        A status change has occurred on RTU."
    ::= { i101EventsGroup 11 }

i10111Rtu OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'rtu' in event I101.11"
    ::= { i101EventObjects11 1 }

i10111Statsu OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'statsu' in event I101.11"
    ::= { i101EventObjects11 2 }

i101EventObjects12 OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Event I101.12
        Tx data discarted due interface is in down state."
    ::= { i101EventsGroup 12 }

i10112Interface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS current
    DESCRIPTION
        "Parameter 'interface' in event I101.12"
    ::= { i101EventObjects12 1 }


i101Notification1 NOTIFICATION-TYPE
    OBJECTS { 
              i1011BytesNumber, 
              i1011Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.1

        Message: 'Rx Data from Serial Terminal $1 bytes, interface $2'

        Parameters list:
              $1: i1011BytesNumber
              $2: i1011Interface

        Data has been received from Serial Terminal."
    ::= { i101NotificationsPrefix 1 }

i101Notification2 NOTIFICATION-TYPE
    OBJECTS { 
              i1012Coment, 
              i1012SerrialAddress,
              i1012BytesNumber,
              i1012Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.2

        Message: 'Rx Message $1 from Serial Terminal address $2, $3 bytes, interface $4'

        Parameters list:
              $1: i1012Coment
              $2: i1012SerrialAddress
              $3: i1012BytesNumber
              $4: i1012Interface

        One OK Message has been received from Serial Terminal."
    ::= { i101NotificationsPrefix 2 }

i101Notification3 NOTIFICATION-TYPE
    OBJECTS { 
              i1013Cause, 
              i1013Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.3

        Message: 'Rx Bad Message from Serial Terminal ($1), interface $2'

        Parameters list:
              $1: i1013Cause
              $2: i1013Interface

        One Bad Message has been received from Serial Terminal."
    ::= { i101NotificationsPrefix 3 }

i101Notification4 NOTIFICATION-TYPE
    OBJECTS { 
              i1014Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.4

        Message: 'A block with LRC/CRC error has been received from Serial Terminal, interface $1'

        Parameters list:
              $1: i1014Interface

        A message with LRC/CRC error has been received from Serial Terminal."
    ::= { i101NotificationsPrefix 4 }

i101Notification5 NOTIFICATION-TYPE
    OBJECTS { 
              i1015Bytes, 
              i1015Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.5

        Message: 'Tx Message to Serial Terminal, $1 bytes interface $2'

        Parameters list:
              $1: i1015Bytes
              $2: i1015Interface

        A Message has been transmitted to Serial Terminal."
    ::= { i101NotificationsPrefix 5 }

i101Notification6 NOTIFICATION-TYPE
    OBJECTS { 
              i1016MessageType, 
              i1016Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.6

        Message: 'Serial Control Signal Imput CD change to $1, interface $2'

        Parameters list:
              $1: i1016MessageType
              $2: i1016Interface

        A change ON/OFF has been detected in Serial Control Signal Input."
    ::= { i101NotificationsPrefix 6 }

i101Notification7 NOTIFICATION-TYPE
    OBJECTS { 
              i1017MessageType, 
              i1017Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.7

        Message: 'Serial Control signal Output DTR change to $1, interface $2'

        Parameters list:
              $1: i1017MessageType
              $2: i1017Interface

        A change ON/OFF has been make in Serial Control Signal Output."
    ::= { i101NotificationsPrefix 7 }

i101Notification8 NOTIFICATION-TYPE
    OBJECTS { 
              i1018MessageType, 
              i1018Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.8

        Message: 'Data ERROR from Serial Terminal has been received type: $1. Interface $2'

        Parameters list:
              $1: i1018MessageType
              $2: i1018Interface

        Data error from Serial Terminal has been received."
    ::= { i101NotificationsPrefix 8 }

i101Notification9 NOTIFICATION-TYPE
    OBJECTS { 
              i1019Interface, 
              i1019SerialAddress,
              i1019Lenght,
              i1019HexData 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.9

        Message: 'Data transmitted to serial interface $1 (addr:$2,$3 bytes):$4'

        Parameters list:
              $1: i1019Interface
              $2: i1019SerialAddress
              $3: i1019Lenght
              $4: i1019HexData

        Detailed Data send to serial interface."
    ::= { i101NotificationsPrefix 9 }

i101Notification10 NOTIFICATION-TYPE
    OBJECTS { 
              i10110Interface, 
              i10110SerialAddress,
              i10110Lenght,
              i10110HexData 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.10

        Message: 'Data received from serial interface $1 (addr:$2,$3 bytes):$4'

        Parameters list:
              $1: i10110Interface
              $2: i10110SerialAddress
              $3: i10110Lenght
              $4: i10110HexData

        Detailed Data received from serial interface."
    ::= { i101NotificationsPrefix 10 }

i101Notification11 NOTIFICATION-TYPE
    OBJECTS { 
              i10111Rtu, 
              i10111Statsu 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.11

        Message: 'RTU $1 link status change to $2'

        Parameters list:
              $1: i10111Rtu
              $2: i10111Statsu

        A status change has occurred on RTU."
    ::= { i101NotificationsPrefix 11 }

i101Notification12 NOTIFICATION-TYPE
    OBJECTS { 
              i10112Interface 
            }
    STATUS current
    DESCRIPTION
        "Notification of Event I101.12

        Message: 'Data transmitted is discarted since interface $1 is down'

        Parameters list:
              $1: i10112Interface

        Tx data discarted due interface is in down state."
    ::= { i101NotificationsPrefix 12 }


END