-- Teldat, S.A.

                -- Parque Tecnolgico de Madrid

                -- 28760, Tres Cantos (Madrid)

                -- Tlf: +34-918076565

                -- Fax: +34-918076521

                -- e-mail: id@teldat.com


            -- MIB privada de Teldat

            -- Monitorizacin de NAT


    -- Historial:
    --      07/02/14    M.A. Pastor     XH 3523. Errors with HP Openview 9.20
    -- 1.1  08/07/09    I. Muoz    Revisin de todas las MIB para evitar
    --                  M.A. Pastor warnings y errores de compilacin
    -- 1.0  01/07/04    J. Molina   Fichero procedente del fichero IP.mib

    -- Historial del fichero IP.mib:
    -- 01-10-01  N. Villaseor  Traduccin a ingles
    -- 01-12-00  M.A. Pastor    Modificaciones para que pueda ser
    --                          compilada utilizando compiladores
    --                          distintos del de Teldat
    -- 04-05-00  M.A. Pastor    Implementacin inicial
    --------------------------------------------------------------------------

TELDAT-MON-PROTOCOL-NAT-MIB DEFINITIONS ::= BEGIN

    IMPORTS
            IpAddress
        FROM RFC1155-SMI
            OBJECT-TYPE
        FROM RFC-1212
            telProdNpMonProtIP
        FROM TELDAT-SW-STRUCTURE-MIB;


-- Grupo telProdNpMonProtIP
-- Grupo de variables de monitorizacin del NAT esttico.

    telProdNpMonProtIPNATMonit OBJECT IDENTIFIER ::= { telProdNpMonProtIP 10 }

    -- Tabla de conexiones NAT: cada entrada es la traduccin de la direccin de
    -- una subred a otra. Las unicas conexiones que generan una entrada en esta
    -- tabla son las FTP de control.

    telProdNpMonProtIPNATConnTable OBJECT-TYPE
        SYNTAX SEQUENCE OF TelProdNpMonProtIPNATConnEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
        "Table of NAT connections: each entry is the traslation of one subnet
        address to another. The only connections that generate an entry to this
        table are the control FTP."
        ::= { telProdNpMonProtIPNATMonit 1 }

    telProdNpMonProtIPNATConnEntry OBJECT-TYPE
        SYNTAX TelProdNpMonProtIPNATConnEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
        "Each entry corresponds to a connection, and consists of an index that
        shows the order of that connection or table entry, the type of
        connection (normal or ftp, only one not clear that admits the router
        that performs static NAT), IP address and source port, IP address and
        destination port, time to live of the entry before being deleted and if
        the connection is active or not. The only connections that generate an
        entry to this table are the FTP of control."
        INDEX { telProdNpMonProtIPNATConnIndex }
        ::= { telProdNpMonProtIPNATConnTable 1 }

    TelProdNpMonProtIPNATConnEntry ::=
        SEQUENCE {
            telProdNpMonProtIPNATConnIndex
                INTEGER,
            telProdNpMonProtIPNATConnType
                INTEGER,
            telProdNpMonProtIPNATConnSrcAddr
                IpAddress,
            telProdNpMonProtIPNATConnSrcPort
                INTEGER,
            telProdNpMonProtIPNATConnDstAddr
                IpAddress,
            telProdNpMonProtIPNATConnDstPort
                INTEGER,
            telProdNpMonProtIPNATConnAge
                INTEGER,
            telProdNpMonProtIPNATConnActive
                INTEGER
            }

    telProdNpMonProtIPNATConnIndex OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
        "Index: connection position or entry to the table."
        ::= { telProdNpMonProtIPNATConnEntry 1 }

    telProdNpMonProtIPNATConnType OBJECT-TYPE
        SYNTAX INTEGER {
            normal(1),
            ftp(2)
            }
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
        "The type of connection of the NAT router. It can be a clear connection,
        normal (1) or a non clear connection, that needs to perform more
        translations in the data side of the packet. In case of static NAT,
        only control of FTP connections with the following features belong to
        this class: client in local domain and server in global domain and
        PORT commands trasnmitted with a change in packet length, ftp(2).
        The only connections that generate an entry to this table are the
        control of FTP connections"
        ::= { telProdNpMonProtIPNATConnEntry 2 }

    telProdNpMonProtIPNATConnSrcAddr OBJECT-TYPE
        SYNTAX IpAddress
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
        "Source IP address of the connection in global format (as it would be
        seen by the global domain)."
        ::= { telProdNpMonProtIPNATConnEntry 3 }

    telProdNpMonProtIPNATConnSrcPort OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
        "Source port of the connection in global format (as it would be seen
        by the global domain)."
        ::= { telProdNpMonProtIPNATConnEntry 4 }

    telProdNpMonProtIPNATConnDstAddr OBJECT-TYPE
        SYNTAX IpAddress
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
        "Destination IP address of the connection in global format (as it would
        be seen by the global domain)."
        ::= { telProdNpMonProtIPNATConnEntry 5 }

    telProdNpMonProtIPNATConnDstPort OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
        "Destination port of the connection in global format (as it would
        be seen by the global domain)."
        ::= { telProdNpMonProtIPNATConnEntry 6 }

    telProdNpMonProtIPNATConnAge OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
        "Time to live of the entry before being deleted."
        ::= { telProdNpMonProtIPNATConnEntry 7 }

    telProdNpMonProtIPNATConnActive OBJECT-TYPE
        SYNTAX INTEGER {
            active(1),
            inactive(2)
            }
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
        "If the NAT router has detected that the connection is active (1)
        or not (2)."
        ::= { telProdNpMonProtIPNATConnEntry 8 }


END