-- Teldat, S.A. -- Parque Tecnolgico de Madrid -- 28760, Tres Cantos (Madrid) -- Tlf: +34-918076565 -- Fax: +34-918076521 -- e-mail: id@teldat.com -- MIB privada de Teldat -- Interfaces PPP -- Historial: -- 07/02/14 M.A. Pastor XH 3523. Errors with HP Openview 9.20 -- 1.2 11-01-13 E. Amorena XH 2610. MIBs compilation. -- 1.1 08/07/09 I. Muoz Revisin de todas las MIB para evitar -- M.A. Pastor warnings y errores de compilacin -- 1.0 01/07/04 J. Molina Archivo procedente de PPP.MIB -- Historial de PPP.MIB: -- 1.7 05-10-07 F. Tresgallo PMP 526. Multiclass MP -- 1.6 22-12-03 J. Roman Se obsoleta grupo IPCP y se crea grupo -- NCP con IPCP y BCP -- 1.5 26-12-01 J.L. Fuentes Se aade el valor unused en algunas -- opciones de CCP para indicar que no -- tienen sentido para el tipo de -- compresion elegido -- 1.4 07-06-01 J.L. Fuentes Se incluye monitorizacin de CCP, MP -- y de la parte DIAL del PPP. Se -- modifican las tablas relacionadas -- con LCP. Tambi n se extraen las -- tablas relativas a los interfaces de -- lnea serie (sncrona y asncrona) y -- se eliminan las tablas que hacan -- referencia a los antiguos interfaces -- PPP sobre canal B de RDSI y PPP -- sobre interfaz de comandos AT que -- desaparecen con la nueva -- implementacin de PPP -- 1.3 01-10-01 N. Villaseor Traduccin a ingles -- 1.2 20-04-01 M.A. Pastor La variable telProdNpMonIfcPPPCommReset -- es de lectura y escritura, y no slo -- de lectura como deca su definicin -- 1.1 01-12-00 M.A. Pastor Modificaciones para que pueda ser -- compilada utilizando compiladores -- distintos del de Teldat -- 1.0 13-06-00 M.A. Pastor Implementacin inicial -------------------------------------------------------------------------- TELDAT-MON-INTERF-PPP-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString, PhysAddress FROM RFC1213-MIB telProdNpMonInterfRouter FROM TELDAT-SW-STRUCTURE-MIB; telProdNpMonInterfPPP OBJECT IDENTIFIER ::= { telProdNpMonInterfRouter 10 } -- Grupo telProdNpMonInterfPPP -- Incluye los parmetros referentes a los interfaces PPP. -- Grupo de parmetros relacionados con el LCP. telProdNpMonIfcPPPLCPGroup OBJECT IDENTIFIER ::= { telProdNpMonInterfPPP 1 } -- Tabla de parmetros globales del LCP. Contiene informacin del estado de -- negociacin de parmetros LCP. telProdNpMonIfcPPPLCPControlGloTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPLCPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains global LCP parameters. The entry number is determined by the PPP interface number, the lower interface number and the order number of the link inside the lower interface." ::= { telProdNpMonIfcPPPLCPGroup 1 } telProdNpMonIfcPPPLCPControlGloEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPLCPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the PPP interface number of the node, the lower interface number, the order number of the link inside the lower interface, a description of the lower interface, the circuit identifier, the version number and the current state of the LCP protocol." INDEX { telProdNpMonIfcPPPLCPCtrlGloPPPIndex, telProdNpMonIfcPPPLCPCtrlGloLowIndex, telProdNpMonIfcPPPLCPCtrlGloOrdIndex } ::= { telProdNpMonIfcPPPLCPControlGloTable 1 } TelProdNpMonIfcPPPLCPControlGloEntry ::= SEQUENCE{ telProdNpMonIfcPPPLCPCtrlGloPPPIndex INTEGER, telProdNpMonIfcPPPLCPCtrlGloLowIndex INTEGER, telProdNpMonIfcPPPLCPCtrlGloOrdIndex INTEGER, telProdNpMonIfcPPPLCPCtrlGloLowDescr DisplayString, telProdNpMonIfcPPPLCPCtrlGloCircId INTEGER, telProdNpMonIfcPPPLCPCtrlGloVersion DisplayString, telProdNpMonIfcPPPLCPCtrlGloState INTEGER } telProdNpMonIfcPPPLCPCtrlGloPPPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PPP interface number of the node (first index of the entry)." ::= { telProdNpMonIfcPPPLCPControlGloEntry 1 } telProdNpMonIfcPPPLCPCtrlGloLowIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lower interface number of the node (second index of the entry)." ::= { telProdNpMonIfcPPPLCPControlGloEntry 2 } telProdNpMonIfcPPPLCPCtrlGloOrdIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry)." ::= { telProdNpMonIfcPPPLCPControlGloEntry 3 } telProdNpMonIfcPPPLCPCtrlGloLowDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the lower interface corresponding to this entry." ::= { telProdNpMonIfcPPPLCPControlGloEntry 4 } telProdNpMonIfcPPPLCPCtrlGloCircId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit identifier inside the lower interface." ::= { telProdNpMonIfcPPPLCPControlGloEntry 5 } telProdNpMonIfcPPPLCPCtrlGloVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Version number." ::= { telProdNpMonIfcPPPLCPControlGloEntry 6 } telProdNpMonIfcPPPLCPCtrlGloState OBJECT-TYPE SYNTAX INTEGER{ initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened." ::= { telProdNpMonIfcPPPLCPControlGloEntry 7 } -- Tabla que contiene los parmetros que permiten monitorizar las opciones -- transmitidas y recibidas en el establecimiento del enlace. telProdNpMonIfcPPPLCPControlOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPLCPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains variables that give information about the transmitted and received options during the link setup. The entry number is determined by the PPP interface number, the lower interface number and the order number of the link inside the lower interface." ::= { telProdNpMonIfcPPPLCPGroup 2 } telProdNpMonIfcPPPLCPControlOptionsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPLCPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the PPP interface number, the lower interface number, the order number of the link inside the lower interface, a description of the lower interface, the circuit identifier, the local and remote MRU, the local and remote Asynchronous Control Character Map, the authentication type (if it exists) in the local and remote site, the local and remote Magic Number, if Protocol Field Compression has been used in the local or remote end, if Address/Control Field Compression has been used in the local or remote end, and if 32 bits Checksum has been used in the local or remote end." INDEX { telProdNpMonIfcPPPLCPCtrlOptPPPIndex, telProdNpMonIfcPPPLCPCtrlOptLowIndex, telProdNpMonIfcPPPLCPCtrlOptOrdIndex } ::= { telProdNpMonIfcPPPLCPControlOptionsTable 1 } TelProdNpMonIfcPPPLCPControlOptionsEntry ::= SEQUENCE{ telProdNpMonIfcPPPLCPCtrlOptPPPIndex INTEGER, telProdNpMonIfcPPPLCPCtrlOptLowIndex INTEGER, telProdNpMonIfcPPPLCPCtrlOptOrdIndex INTEGER, telProdNpMonIfcPPPLCPCtrlOptLowDescr DisplayString, telProdNpMonIfcPPPLCPCtrlOptCircId INTEGER, telProdNpMonIfcPPPLCPCtrlOptMRULoc INTEGER, telProdNpMonIfcPPPLCPCtrlOptMRURem INTEGER, telProdNpMonIfcPPPLCPCtrlOptAsyCharMaskLoc OCTET STRING, telProdNpMonIfcPPPLCPCtrlOptAsyCharMaskRem OCTET STRING, telProdNpMonIfcPPPLCPCtrlOptAuthLoc INTEGER, telProdNpMonIfcPPPLCPCtrlOptAuthRem INTEGER, telProdNpMonIfcPPPLCPCtrlOptMagNumLoc DisplayString, telProdNpMonIfcPPPLCPCtrlOptMagNumRem DisplayString, telProdNpMonIfcPPPLCPCtrlOptProtCmpLoc INTEGER, telProdNpMonIfcPPPLCPCtrlOptProtCmpRem INTEGER, telProdNpMonIfcPPPLCPCtrlOptAddCmpLoc INTEGER, telProdNpMonIfcPPPLCPCtrlOptAddCmpRem INTEGER, telProdNpMonIfcPPPLCPCtrlOptChecksumLoc INTEGER, telProdNpMonIfcPPPLCPCtrlOptChecksumRem INTEGER } telProdNpMonIfcPPPLCPCtrlOptPPPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PPP interface number of the node (first index of the entry)." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 1 } telProdNpMonIfcPPPLCPCtrlOptLowIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lower interface number of the node (second index of the entry)." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 2 } telProdNpMonIfcPPPLCPCtrlOptOrdIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry)." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 3 } telProdNpMonIfcPPPLCPCtrlOptLowDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the lower interface corresponding to this entry." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 4 } telProdNpMonIfcPPPLCPCtrlOptCircId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit identifier inside the lower interface." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 5 } telProdNpMonIfcPPPLCPCtrlOptMRULoc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "MRU (Maximum Received Unit) in the local end. It represents the PPP frame maximum size that is accepted in reception." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 6 } telProdNpMonIfcPPPLCPCtrlOptMRURem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "MRU (Maximum Received Unit) in the remote end. It represents the PPP frame maximum size that is accepted in reception." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 7 } telProdNpMonIfcPPPLCPCtrlOptAsyCharMaskLoc OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Local Asynchronous Control Character Map. It shows the mask to use if transparent transmission is applied over control characters (XON, XOFF) for asynchronous PPP. If characters are inside the frame, they won't cause the activation of flow control process in modems or adapters." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 8 } telProdNpMonIfcPPPLCPCtrlOptAsyCharMaskRem OBJECT-TYPE SYNTAX OCTET STRING(SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "Remote Asynchronous Control Character Map. It shows the mask to use if transparent transmission is applied over control characters (XON, XOFF) for asynchronous PPP. If characters are inside the frame, they won't cause the activation of flow control process in modems or adapters." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 9 } telProdNpMonIfcPPPLCPCtrlOptAuthLoc OBJECT-TYPE SYNTAX INTEGER{ none(0), pap(1), chap(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Local authentication type used. Possible options are: PAP (1), CHAP (2), a different one (3) or no authentication used (0)." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 10 } telProdNpMonIfcPPPLCPCtrlOptAuthRem OBJECT-TYPE SYNTAX INTEGER{ none(0), pap(1), chap(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Remote authentication type used. Possible options are: PAP (1), CHAP (2), a different one (3) or no authentication used (0)." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 11 } telProdNpMonIfcPPPLCPCtrlOptMagNumLoc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Local magic number. It is useful to determine if there is a loop in the link by transmitting a random number between the ends based on the system clock and the times the clock has reset. The magic number has 4 bytes. This variable is a string that shows an hexadecimal value." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 12 } telProdNpMonIfcPPPLCPCtrlOptMagNumRem OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Remote magic number. It is useful to determine if there is a loop in the link by transmitting a random number between the ends based on the system clock and the times the clock has reset. The magic number has 4 bytes. This variable is a string that shows an hexadecimal value." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 13 } telProdNpMonIfcPPPLCPCtrlOptProtCmpLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if Protocol Field Compression is used at the local end. Possible values are: (1) yes or (2) no. Once LCP has been negotiated and NCP has been established, the PPP frame protocol field is compressed and a byte is transmitted." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 14 } telProdNpMonIfcPPPLCPCtrlOptProtCmpRem OBJECT-TYPE SYNTAX INTEGER{ non-negotiated(0), yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if Protocol Field Compression is used at the remote end. Possible values are: (0) non negotiated, (1) yes or (2) no. Once LCP has been negotiated and NCP has been established, the PPP frame protocol field is compressed and a byte is transmitted." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 15 } telProdNpMonIfcPPPLCPCtrlOptAddCmpLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if Address/Control Field Compression is used at the local end. Possible values are: (1) yes or (2) no. Once LCP has been negotiated and NCP has been established, the control and address fields of the PPP frame are not transmitted." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 16 } telProdNpMonIfcPPPLCPCtrlOptAddCmpRem OBJECT-TYPE SYNTAX INTEGER{ non-negotiated(0), yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if Address/Control Field Compression is used at the remote end. Possible values are: (0) non negotiated, (1) yes or (2) no. Once LCP has been negotiated and NCP has been established, the control and address fields of the PPP frame are not transmitted." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 17 } telProdNpMonIfcPPPLCPCtrlOptChecksumLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if 32 bits Checksum is used at the local end. Possible values are: (1) yes or (2) no." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 18 } telProdNpMonIfcPPPLCPCtrlOptChecksumRem OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if 32 bits Checksum is used at the remote end. Possible values are: (1) yes or (2) no." ::= { telProdNpMonIfcPPPLCPControlOptionsEntry 19 } -- Tabla que contiene los estadsicos correspondientes al protocolo LCP. telProdNpMonIfcPPPLCPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPLCPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistics of the LCP protocol. The entry number is determined by the PPP interface number, the lower interface number and the order number of the link inside the lower interface." ::= { telProdNpMonIfcPPPLCPGroup 3 } telProdNpMonIfcPPPLCPStatsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPLCPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the PPP interface number, the lower interface number, the order number of the link inside the lower interface, a description of the lower interface, the circuit identifier, a variable to check variables deletion (corresponding counters reset), and variables that give information about the following counters values: sent and received frames number, sent and received bytes number, number of sent and received Configure Request LCP frames, number of sent and received Configure Ack LCP frames, number of sent and received Configure Nak LCP frames, number of sent and received Configure Reject LCP frames, number of sent and received Terminate Request LCP frames, number of sent and received Terminate Ack LCP frames, number of sent and received Echo Request LCP frames, number of sent and received Echo Reply LCP frames." INDEX { telProdNpMonIfcPPPLCPStPPPIndex, telProdNpMonIfcPPPLCPStLowIndex, telProdNpMonIfcPPPLCPStOrdIndex } ::= { telProdNpMonIfcPPPLCPStatsTable 1 } TelProdNpMonIfcPPPLCPStatsEntry ::= SEQUENCE{ telProdNpMonIfcPPPLCPStPPPIndex INTEGER, telProdNpMonIfcPPPLCPStLowIndex INTEGER, telProdNpMonIfcPPPLCPStOrdIndex INTEGER, telProdNpMonIfcPPPLCPStLowDescr DisplayString, telProdNpMonIfcPPPLCPStCircId INTEGER, telProdNpMonIfcPPPLCPStClear INTEGER, telProdNpMonIfcPPPLCPStFramesRx Counter, telProdNpMonIfcPPPLCPStFramesTx Counter, telProdNpMonIfcPPPLCPStBytesRx Counter, telProdNpMonIfcPPPLCPStBytesTx Counter, telProdNpMonIfcPPPLCPStConfReqRx Counter, telProdNpMonIfcPPPLCPStConfReqTx Counter, telProdNpMonIfcPPPLCPStConfAckRx Counter, telProdNpMonIfcPPPLCPStConfAckTx Counter, telProdNpMonIfcPPPLCPStConfNakRx Counter, telProdNpMonIfcPPPLCPStConfNakTx Counter, telProdNpMonIfcPPPLCPStConfRejRx Counter, telProdNpMonIfcPPPLCPStConfRejTx Counter, telProdNpMonIfcPPPLCPStTermReqRx Counter, telProdNpMonIfcPPPLCPStTermReqTx Counter, telProdNpMonIfcPPPLCPStTermAckRx Counter, telProdNpMonIfcPPPLCPStTermAckTx Counter, telProdNpMonIfcPPPLCPStEchoReqRx Counter, telProdNpMonIfcPPPLCPStEchoReqTx Counter, telProdNpMonIfcPPPLCPStEchoRepRx Counter, telProdNpMonIfcPPPLCPStEchoRepTx Counter } telProdNpMonIfcPPPLCPStPPPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PPP interface number of the node (first index of the entry)." ::= { telProdNpMonIfcPPPLCPStatsEntry 1 } telProdNpMonIfcPPPLCPStLowIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lower interface number of the node (second index of the entry)." ::= { telProdNpMonIfcPPPLCPStatsEntry 2 } telProdNpMonIfcPPPLCPStOrdIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry)." ::= { telProdNpMonIfcPPPLCPStatsEntry 3 } telProdNpMonIfcPPPLCPStLowDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the lower interface corresponding to this entry." ::= { telProdNpMonIfcPPPLCPStatsEntry 4 } telProdNpMonIfcPPPLCPStCircId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit identifier inside the lower interface." ::= { telProdNpMonIfcPPPLCPStatsEntry 5 } telProdNpMonIfcPPPLCPStClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart." ::= { telProdNpMonIfcPPPLCPStatsEntry 6 } telProdNpMonIfcPPPLCPStFramesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames received through the link shown in the indexes." ::= { telProdNpMonIfcPPPLCPStatsEntry 7 } telProdNpMonIfcPPPLCPStFramesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames sent through the link shown in the indexes." ::= { telProdNpMonIfcPPPLCPStatsEntry 8 } telProdNpMonIfcPPPLCPStBytesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes received through the link shown in the indexes." ::= { telProdNpMonIfcPPPLCPStatsEntry 9 } telProdNpMonIfcPPPLCPStBytesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes sent through the link shown in the indexes." ::= { telProdNpMonIfcPPPLCPStatsEntry 10 } telProdNpMonIfcPPPLCPStConfReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Request LCP frames received through the link shown in the indexes. These frames are transmitted when a link is started and contains link configuration options." ::= { telProdNpMonIfcPPPLCPStatsEntry 11 } telProdNpMonIfcPPPLCPStConfReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Request LCP frames sent through the link shown in the indexes. These frames are transmitted when a link is started and contains link configuration options." ::= { telProdNpMonIfcPPPLCPStatsEntry 12 } telProdNpMonIfcPPPLCPStConfAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Ack LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and shows accordance with the received configuration options." ::= { telProdNpMonIfcPPPLCPStatsEntry 13 } telProdNpMonIfcPPPLCPStConfAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Ack LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and shows accordance with the received configuration options." ::= { telProdNpMonIfcPPPLCPStatsEntry 14 } telProdNpMonIfcPPPLCPStConfNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Nak LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some configuration options received in the identified frame has not been accepted, nevertheless a remote reccomended or accepted value is sent." ::= { telProdNpMonIfcPPPLCPStatsEntry 15 } telProdNpMonIfcPPPLCPStConfNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Nak LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some configuration options received in the identified frame has not been accepted, nevertheless a remote reccomended or accepted value is sent." ::= { telProdNpMonIfcPPPLCPStatsEntry 16 } telProdNpMonIfcPPPLCPStConfRejRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Reject LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some configuration options received in the identified frame has not neither accepted nor recognized." ::= { telProdNpMonIfcPPPLCPStatsEntry 17 } telProdNpMonIfcPPPLCPStConfRejTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Reject LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some configuration options received in the identified frame has not neither accepted nor recognized." ::= { telProdNpMonIfcPPPLCPStatsEntry 18 } telProdNpMonIfcPPPLCPStTermReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Request LCP frames received through the link shown in the indexes. These frames are transmitted to finish, close, the link." ::= { telProdNpMonIfcPPPLCPStatsEntry 19 } telProdNpMonIfcPPPLCPStTermReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Request LCP frames transmitted through the link shown in the indexes. These frames are transmitted to finish, close, the link." ::= { telProdNpMonIfcPPPLCPStatsEntry 20 } telProdNpMonIfcPPPLCPStTermAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Ack LCP frames received through the link shown in the indexes. These frames are transmitted after a Terminate Request is received. The reception of a non expected Terminate Ack packet indicates that the link has been closed." ::= { telProdNpMonIfcPPPLCPStatsEntry 21 } telProdNpMonIfcPPPLCPStTermAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Ack LCP frames transmitted through the link shown in the indexes. These frames are transmitted after a Terminate Request is received. The reception of a non expected Terminate Ack packet indicates that the link has been closed." ::= { telProdNpMonIfcPPPLCPStatsEntry 22 } telProdNpMonIfcPPPLCPStEchoReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Echo Request LCP frames received through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing Echo Request code is generated, and is sent back with an Echo Reply." ::= { telProdNpMonIfcPPPLCPStatsEntry 23 } telProdNpMonIfcPPPLCPStEchoReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Echo Request LCP frames transmitted through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing Echo Request code is generated, and is sent back with an Echo Reply." ::= { telProdNpMonIfcPPPLCPStatsEntry 24 } telProdNpMonIfcPPPLCPStEchoRepRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Echo Reply LCP frames received through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing Echo Request code is generated, and is sent back with an Echo Reply." ::= { telProdNpMonIfcPPPLCPStatsEntry 25 } telProdNpMonIfcPPPLCPStEchoRepTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Echo Reply LCP frames transmitted through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing Echo Request code is generated, and is sent back with an Echo Reply." ::= { telProdNpMonIfcPPPLCPStatsEntry 26 } -- Grupo de parmetros relacionados con el IPCP. telProdNpMonIfcPPPIPCPGroup OBJECT IDENTIFIER ::= { telProdNpMonInterfPPP 2 } -- Tabla que contiene informacin sobre el estado actual del IPCP. telProdNpMonIfcPPPIPCPControlGloTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPIPCPControlGloEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This table contains IPCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding interface number (table index)." ::= { telProdNpMonIfcPPPIPCPGroup 1 } telProdNpMonIfcPPPIPCPControlGloEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPIPCPControlGloEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "Each entry contains the node interface number which is the table index, and a variable that shows the current state of the IPCP protocol." INDEX { telProdNpMonIfcPPPIPCPCtrlGloIndex } ::= { telProdNpMonIfcPPPIPCPControlGloTable 1 } TelProdNpMonIfcPPPIPCPControlGloEntry ::= SEQUENCE{ telProdNpMonIfcPPPIPCPCtrlGloIndex INTEGER, telProdNpMonIfcPPPIPCPCtrlGloState INTEGER } telProdNpMonIfcPPPIPCPCtrlGloIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPIPCPControlGloEntry 1 } telProdNpMonIfcPPPIPCPCtrlGloState OBJECT-TYPE SYNTAX INTEGER{ initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9) } ACCESS read-only STATUS obsolete DESCRIPTION "Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened." ::= { telProdNpMonIfcPPPIPCPControlGloEntry 2 } -- Tabla que contiene los parmetros que permiten monitorizar las opciones -- transmitidas y recibidas en el establecimiento del protocolo de nivel -- de RED. telProdNpMonIfcPPPIPCPControlOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPIPCPControlOptionsEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is determined by the interface value (table index)." ::= { telProdNpMonIfcPPPIPCPGroup 2 } telProdNpMonIfcPPPIPCPControlOptionsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPIPCPControlOptionsEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "Each entry contains the node interface number, which is the table index, the assigned IP address (in case of dinamic asignation), remote end IP address (if received) and if the Van Jacobson compression option has been selected at any end (local or remote)." INDEX { telProdNpMonIfcPPPIPCPCtrlOptIndex } ::= { telProdNpMonIfcPPPIPCPControlOptionsTable 1 } TelProdNpMonIfcPPPIPCPControlOptionsEntry ::= SEQUENCE{ telProdNpMonIfcPPPIPCPCtrlOptIndex INTEGER, telProdNpMonIfcPPPIPCPCtrlOptIpAddrLoc IpAddress, telProdNpMonIfcPPPIPCPCtrlOptIpAddrRem IpAddress, telProdNpMonIfcPPPIPCPCtrlOptVJCmpLoc INTEGER, telProdNpMonIfcPPPIPCPCtrlOptVJCmpRem INTEGER } telProdNpMonIfcPPPIPCPCtrlOptIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPIPCPControlOptionsEntry 1 } telProdNpMonIfcPPPIPCPCtrlOptIpAddrLoc OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "The IP address assigned (supposing dinamic assignation has been selected)." ::= { telProdNpMonIfcPPPIPCPControlOptionsEntry 2 } telProdNpMonIfcPPPIPCPCtrlOptIpAddrRem OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "The remote IP address (supposing it has been received)." ::= { telProdNpMonIfcPPPIPCPControlOptionsEntry 3 } telProdNpMonIfcPPPIPCPCtrlOptVJCmpLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS obsolete DESCRIPTION "Van Jacobson compression selected or not in the local end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPIPCPControlOptionsEntry 4 } telProdNpMonIfcPPPIPCPCtrlOptVJCmpRem OBJECT-TYPE SYNTAX INTEGER{ non-negotiated(0), yes(1), no(2) } ACCESS read-only STATUS obsolete DESCRIPTION "Van Jacobson compression selected or not in the remote end: (0) non negotiated, (1) yes, (2) no." ::= { telProdNpMonIfcPPPIPCPControlOptionsEntry 5 } -- Tabla que contiene los estadsicos correspondientes al protocolo IPCP. telProdNpMonIfcPPPIPCPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPIPCPStatsEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This table contains statistics of the IPCP protocol. The entry number is determined by the interface number (table index)." ::= { telProdNpMonIfcPPPIPCPGroup 3 } telProdNpMonIfcPPPIPCPStatsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPIPCPStatsEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received Configure Request NCP frames, number of sent and received Configure Ack NCP frames, number of sent and received Configure Nak NCP frames, number of sent and received Configure Reject NCP frames, number of sent and received Terminate Request NCP frames, number of sent and received Terminate Ack NCP frames." INDEX { telProdNpMonIfcPPPIPCPStIndex } ::= { telProdNpMonIfcPPPIPCPStatsTable 1 } TelProdNpMonIfcPPPIPCPStatsEntry ::= SEQUENCE{ telProdNpMonIfcPPPIPCPStIndex INTEGER, telProdNpMonIfcPPPIPCPStClear INTEGER, telProdNpMonIfcPPPIPCPStConfReqRx Counter, telProdNpMonIfcPPPIPCPStConfReqTx Counter, telProdNpMonIfcPPPIPCPStConfAckRx Counter, telProdNpMonIfcPPPIPCPStConfAckTx Counter, telProdNpMonIfcPPPIPCPStConfNakRx Counter, telProdNpMonIfcPPPIPCPStConfNakTx Counter, telProdNpMonIfcPPPIPCPStConfRejRx Counter, telProdNpMonIfcPPPIPCPStConfRejTx Counter, telProdNpMonIfcPPPIPCPStTermReqRx Counter, telProdNpMonIfcPPPIPCPStTermReqTx Counter, telProdNpMonIfcPPPIPCPStTermAckRx Counter, telProdNpMonIfcPPPIPCPStTermAckTx Counter } telProdNpMonIfcPPPIPCPStIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPIPCPStatsEntry 1 } telProdNpMonIfcPPPIPCPStClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS obsolete DESCRIPTION "This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart." ::= { telProdNpMonIfcPPPIPCPStatsEntry 2 } telProdNpMonIfcPPPIPCPStConfReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Configure Request NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 3 } telProdNpMonIfcPPPIPCPStConfReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Configure Request NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 4 } telProdNpMonIfcPPPIPCPStConfAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Configure Ack NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 5 } telProdNpMonIfcPPPIPCPStConfAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Configure Ack NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 6 } telProdNpMonIfcPPPIPCPStConfNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Configure Nak NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 7 } telProdNpMonIfcPPPIPCPStConfNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Configure Nak NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 8 } telProdNpMonIfcPPPIPCPStConfRejRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Configure Reject NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 9 } telProdNpMonIfcPPPIPCPStConfRejTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Configure Reject NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 10 } telProdNpMonIfcPPPIPCPStTermReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Terminate Request NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 11 } telProdNpMonIfcPPPIPCPStTermReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Terminate Request NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 12 } telProdNpMonIfcPPPIPCPStTermAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Terminate Ack NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 13 } telProdNpMonIfcPPPIPCPStTermAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS obsolete DESCRIPTION "Number of Terminate Ack NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPIPCPStatsEntry 14 } -- Tabla que contiene los parmetros de monitorizacin correspondientes a la -- compresin Van Jacobson. telProdNpMonIfcPPPVJStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPVJStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains monitoring parameters related to Van Jacobson compression. The entry number is determined by the interface number." ::= { telProdNpMonInterfPPP 3 } telProdNpMonIfcPPPVJStatsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPVJStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of outbound TCP/IP packets, number of outbound compressed TCP/IP packets, number of searchs of the connection state, number of times the connection state wasn't found, number of inbound TCP/IP packets, number of inbound compressed TCP/IP packets, number of inbound TCP/IP packets classified as unknown and number of tossed error inbound TCP/IP packets." INDEX { telProdNpMonIfcPPPVJStIndex } ::= { telProdNpMonIfcPPPVJStatsTable 1 } TelProdNpMonIfcPPPVJStatsEntry ::= SEQUENCE{ telProdNpMonIfcPPPVJStIndex INTEGER, telProdNpMonIfcPPPVJStClear INTEGER, telProdNpMonIfcPPPVJStOutPackets Counter, telProdNpMonIfcPPPVJStOutComprPkts Counter, telProdNpMonIfcPPPVJStSearches Counter, telProdNpMonIfcPPPVJStNoConnState Counter, telProdNpMonIfcPPPVJStInUncomPkts Counter, telProdNpMonIfcPPPVJStInComprPkts Counter, telProdNpMonIfcPPPVJStInUnkTypePkts Counter, telProdNpMonIfcPPPVJStInPktsTossErr Counter } telProdNpMonIfcPPPVJStIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPVJStatsEntry 1 } telProdNpMonIfcPPPVJStClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last counter restart attemp: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart." ::= { telProdNpMonIfcPPPVJStatsEntry 2 } telProdNpMonIfcPPPVJStOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of outbound TCP/IP packets." ::= { telProdNpMonIfcPPPVJStatsEntry 3 } telProdNpMonIfcPPPVJStOutComprPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of outbound compressed TCP/IP packets." ::= { telProdNpMonIfcPPPVJStatsEntry 4 } telProdNpMonIfcPPPVJStSearches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of searchs of the connection state." ::= { telProdNpMonIfcPPPVJStatsEntry 5 } telProdNpMonIfcPPPVJStNoConnState OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Times the connection state could not be found." ::= { telProdNpMonIfcPPPVJStatsEntry 6 } telProdNpMonIfcPPPVJStInUncomPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound uncompressed TCP/IP packets." ::= { telProdNpMonIfcPPPVJStatsEntry 7 } telProdNpMonIfcPPPVJStInComprPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound compressed TCP/IP packets." ::= { telProdNpMonIfcPPPVJStatsEntry 8 } telProdNpMonIfcPPPVJStInUnkTypePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound TCP/IP packets classified as unkown." ::= { telProdNpMonIfcPPPVJStatsEntry 9 } telProdNpMonIfcPPPVJStInPktsTossErr OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound TCP/IP packets tossed error." ::= { telProdNpMonIfcPPPVJStatsEntry 10 } -- Tabla que contiene los parmetros de monitorizacin correspondientes a la -- compresin CRTP. telProdNpMonIfcPPPCrtpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPCrtpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains monitoring parameters related to CRTP compression. The entry number is determined by the interface number." ::= { telProdNpMonInterfPPP 4 } telProdNpMonIfcPPPCrtpStatsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPCrtpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of outbound RTP packets, number of outbound compressed RTP packets, number of searchs of the connection state, number of times the connection state wasn't found, number of inbound RTP packets, number of inbound compressed RTP packets, number of inbound RTP packets classified as unknown and number of inbound RTP Context State packets." INDEX { telProdNpMonIfcPPPCrtpStIndex } ::= { telProdNpMonIfcPPPCrtpStatsTable 1 } TelProdNpMonIfcPPPCrtpStatsEntry ::= SEQUENCE{ telProdNpMonIfcPPPCrtpStIndex INTEGER, telProdNpMonIfcPPPCrtpStClear INTEGER, telProdNpMonIfcPPPCrtpStOutPackets Counter, telProdNpMonIfcPPPCrtpStOutComprPkts Counter, telProdNpMonIfcPPPCrtpStSearches Counter, telProdNpMonIfcPPPCrtpStNoConnState Counter, telProdNpMonIfcPPPCrtpStInUncomPkts Counter, telProdNpMonIfcPPPCrtpStInComprPkts Counter, telProdNpMonIfcPPPCrtpStInUnkTypePkts Counter, telProdNpMonIfcPPPCrtpStInContextStPkts Counter } telProdNpMonIfcPPPCrtpStIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPCrtpStatsEntry 1 } telProdNpMonIfcPPPCrtpStClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart." ::= { telProdNpMonIfcPPPCrtpStatsEntry 2 } telProdNpMonIfcPPPCrtpStOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of outbound RTP packets." ::= { telProdNpMonIfcPPPCrtpStatsEntry 3 } telProdNpMonIfcPPPCrtpStOutComprPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of outbound compressed RTP packets." ::= { telProdNpMonIfcPPPCrtpStatsEntry 4 } telProdNpMonIfcPPPCrtpStSearches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of searchs of the connection state." ::= { telProdNpMonIfcPPPCrtpStatsEntry 5 } telProdNpMonIfcPPPCrtpStNoConnState OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Times the connection state could not be found." ::= { telProdNpMonIfcPPPCrtpStatsEntry 6 } telProdNpMonIfcPPPCrtpStInUncomPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound uncompressed RTP packets." ::= { telProdNpMonIfcPPPCrtpStatsEntry 7 } telProdNpMonIfcPPPCrtpStInComprPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound compressed RTP packets." ::= { telProdNpMonIfcPPPCrtpStatsEntry 8 } telProdNpMonIfcPPPCrtpStInUnkTypePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound RTP packets classified as unkown." ::= { telProdNpMonIfcPPPCrtpStatsEntry 9 } telProdNpMonIfcPPPCrtpStInContextStPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of inbound RTP Context State packets" ::= { telProdNpMonIfcPPPCrtpStatsEntry 10 } -- Grupo de comandos: CLEAR y RESET-LINK. telProdNpMonIfcPPPCommandGroup OBJECT IDENTIFIER ::= { telProdNpMonInterfPPP 5 } -- Tabla que sirve para ejecutar el comando CLEAR en los distintos -- posibles interfaces. telProdNpMonIfcPPPCommClearTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPCommClearEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of CLEAR commands for different interfaces. The entry number is determined by the interface number and indicates the interface type to which this command is applied." ::= { telProdNpMonIfcPPPCommandGroup 1 } telProdNpMonIfcPPPCommClearEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPCommClearEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the interface number, that is the table index, and indicates the interface the CLEAR command is applied on, a variable to perform the CLEAR operation: restart interface statistics, that when is readed indicates the output of the last CLEAR operation." INDEX { telProdNpMonIfcPPPCommClearIndex } ::= { telProdNpMonIfcPPPCommClearTable 1 } TelProdNpMonIfcPPPCommClearEntry ::= SEQUENCE{ telProdNpMonIfcPPPCommClearIndex INTEGER, telProdNpMonIfcPPPCommClear INTEGER } telProdNpMonIfcPPPCommClearIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPCommClearEntry 1 } telProdNpMonIfcPPPCommClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last attempt to restart interface statistics. Possible values are: 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the table yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes statistics to restart." ::= { telProdNpMonIfcPPPCommClearEntry 2 } -- Tabla que sirve para ejecutar el comando RESET-LINK en los distintos -- posibles interfaces. telProdNpMonIfcPPPCommResetTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPCommResetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of RESET-LINK commands for different type of interfaces. The entry number is determined by the interface number, and indicates which interface we are considering." ::= { telProdNpMonIfcPPPCommandGroup 2 } telProdNpMonIfcPPPCommResetEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPCommResetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, that is the table index, and indicates the interface the RESET-LINK command is applied on, and a variable to perform the RESET-LINK operation: pull down the PPP link and when the variable is readed indicates the output of the last operation attempt." INDEX { telProdNpMonIfcPPPCommResetIndex } ::= { telProdNpMonIfcPPPCommResetTable 1 } TelProdNpMonIfcPPPCommResetEntry ::= SEQUENCE{ telProdNpMonIfcPPPCommResetIndex INTEGER, telProdNpMonIfcPPPCommReset INTEGER } telProdNpMonIfcPPPCommResetIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPCommResetEntry 1 } telProdNpMonIfcPPPCommReset OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last attempt to drop PPP link. Possible values are: 2 (ok) if the operation was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to drop the link yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) implies the PPP link is going to be dropped." ::= { telProdNpMonIfcPPPCommResetEntry 2 } -- Grupo de parmetros relacionados con el CCP. telProdNpMonIfcPPPCCPGroup OBJECT IDENTIFIER ::= { telProdNpMonInterfPPP 6 } -- Tabla de parmetros globales del CCP. Contiene informacin del estado de -- negociacion de parmetros CCP. telProdNpMonIfcPPPCCPControlGloTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPCCPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains CCP global parameters. This table has an entry for each PPP interface. The entry number is determined by the corresponding interface number (table index)." ::= { telProdNpMonIfcPPPCCPGroup 1 } telProdNpMonIfcPPPCCPControlGloEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPCCPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number which is the table index, and variables that shows if the CCP protocol is enabled or disabled, and the current state of the CCP protocol." INDEX { telProdNpMonIfcPPPCCPCtrlGloIndex } ::= { telProdNpMonIfcPPPCCPControlGloTable 1 } TelProdNpMonIfcPPPCCPControlGloEntry ::= SEQUENCE{ telProdNpMonIfcPPPCCPCtrlGloIndex INTEGER, telProdNpMonIfcPPPCCPCtrlGloCCP INTEGER, telProdNpMonIfcPPPCCPCtrlGloState INTEGER } telProdNpMonIfcPPPCCPCtrlGloIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPCCPControlGloEntry 1 } telProdNpMonIfcPPPCCPCtrlGloCCP OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if the CCP protocol is enabled or disabled." ::= { telProdNpMonIfcPPPCCPControlGloEntry 2 } telProdNpMonIfcPPPCCPCtrlGloState OBJECT-TYPE SYNTAX INTEGER{ initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened." ::= { telProdNpMonIfcPPPCCPControlGloEntry 3 } -- Tabla que contiene los parmetros que permiten monitorizar las opciones -- del protocolo CCP. telProdNpMonIfcPPPCCPControlOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPCCPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the variables that informs about the CCP protocol options. The entry number is determined by the interface value (table index)." ::= { telProdNpMonIfcPPPCCPGroup 2 } telProdNpMonIfcPPPCCPControlOptionsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPCCPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, the output and input encapsulated protocol, the output and input event, the type of configuration format associated to the output and input, the number of output and input negotiated histories, the output and input negotiated check mode, the output and input negotiated process mode, the output and input session and the output and input sequence number." INDEX { telProdNpMonIfcPPPCCPCtrlOptIndex } ::= { telProdNpMonIfcPPPCCPControlOptionsTable 1 } TelProdNpMonIfcPPPCCPControlOptionsEntry ::= SEQUENCE{ telProdNpMonIfcPPPCCPCtrlOptIndex INTEGER, telProdNpMonIfcPPPCCPCtrlOptProtOut INTEGER, telProdNpMonIfcPPPCCPCtrlOptProtIn INTEGER, telProdNpMonIfcPPPCCPCtrlOptEventOut INTEGER, telProdNpMonIfcPPPCCPCtrlOptEventIn INTEGER, telProdNpMonIfcPPPCCPCtrlOptTypeOut INTEGER, telProdNpMonIfcPPPCCPCtrlOptTypeIn INTEGER, telProdNpMonIfcPPPCCPCtrlOptHistOut DisplayString, telProdNpMonIfcPPPCCPCtrlOptHistIn DisplayString, telProdNpMonIfcPPPCCPCtrlOptChkModOut INTEGER, telProdNpMonIfcPPPCCPCtrlOptChkModIn INTEGER, telProdNpMonIfcPPPCCPCtrlOptPrcModOut INTEGER, telProdNpMonIfcPPPCCPCtrlOptPrcModIn INTEGER, telProdNpMonIfcPPPCCPCtrlOptSessionOut DisplayString, telProdNpMonIfcPPPCCPCtrlOptSessionIn DisplayString, telProdNpMonIfcPPPCCPCtrlOptSeqNumOut INTEGER, telProdNpMonIfcPPPCCPCtrlOptSeqNumIn INTEGER } telProdNpMonIfcPPPCCPCtrlOptIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 1 } telProdNpMonIfcPPPCCPCtrlOptProtOut OBJECT-TYPE SYNTAX INTEGER{ ppp(1), mppp(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Output encapsulated protocol. It can be used PPP (1), MPPP (2) or other different of thesesones (3)." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 2 } telProdNpMonIfcPPPCCPCtrlOptProtIn OBJECT-TYPE SYNTAX INTEGER{ ppp(1), mppp(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Input encapsulated protocol. It can be used PPP (1), MPPP (2) or other different of thesesones (3)." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 3 } telProdNpMonIfcPPPCCPCtrlOptEventOut OBJECT-TYPE SYNTAX INTEGER{ encode(1), decode(2), all(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Output event." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 4 } telProdNpMonIfcPPPCCPCtrlOptEventIn OBJECT-TYPE SYNTAX INTEGER{ encode(1), decode(2), all(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Input event." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 5 } telProdNpMonIfcPPPCCPCtrlOptTypeOut OBJECT-TYPE SYNTAX INTEGER{ lzs-dcp(1), no-comp(2), stac(3), msppc(4), predic(5), bsdlzw(6), other(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of configuration format associated to the output." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 6 } telProdNpMonIfcPPPCCPCtrlOptTypeIn OBJECT-TYPE SYNTAX INTEGER{ lzs-dcp(1), no-comp(2), stac(3), msppc(4), predic(5), bsdlzw(6), other(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of configuration format associated to the input." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 7 } telProdNpMonIfcPPPCCPCtrlOptHistOut OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The number of output negotiated histories. This variable indicates pack to pack or the corresponding number." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 8 } telProdNpMonIfcPPPCCPCtrlOptHistIn OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The number of input negotiated histories. This variable indicates pack to pack or the corresponding number." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 9 } telProdNpMonIfcPPPCCPCtrlOptChkModOut OBJECT-TYPE SYNTAX INTEGER{ unused(0), none(1), lcb(2), crc(3), seqnum(4), seqnum-and-lcb(5), extended(6), other(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Output negotiated check mode." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 10 } telProdNpMonIfcPPPCCPCtrlOptChkModIn OBJECT-TYPE SYNTAX INTEGER{ unused(0), none(1), lcb(2), crc(3), seqnum(4), seqnum-and-lcb(5), extended(6), other(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Input negotiated check mode." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 11 } telProdNpMonIfcPPPCCPCtrlOptPrcModOut OBJECT-TYPE SYNTAX INTEGER{ unused(0), none(1), procuncomp(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Output negotiated process mode." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 12 } telProdNpMonIfcPPPCCPCtrlOptPrcModIn OBJECT-TYPE SYNTAX INTEGER{ unused(0), none(1), procuncomp(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Input negotiated process mode." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 13 } telProdNpMonIfcPPPCCPCtrlOptSessionOut OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Output session identifier." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 14 } telProdNpMonIfcPPPCCPCtrlOptSessionIn OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Input session identifier." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 15 } telProdNpMonIfcPPPCCPCtrlOptSeqNumOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Output sequence number." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 16 } telProdNpMonIfcPPPCCPCtrlOptSeqNumIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Input sequence number." ::= { telProdNpMonIfcPPPCCPControlOptionsEntry 17 } -- Tabla que contiene los estadsicos correspondientes al protocolo CCP. telProdNpMonIfcPPPCCPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPCCPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistics of the CCP protocol. The entry number is determined by the interface number (table index)." ::= { telProdNpMonIfcPPPCCPGroup 3 } telProdNpMonIfcPPPCCPStatsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPCCPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received Configure Request CCP frames, number of sent and received Configure Ack CCP frames, number of sent and received Configure Nak CCP frames, number of sent and received Configure Reject CCP frames, number of sent and received Terminate Request CCP frames, number of sent and received Terminate Ack CCP frames, number of sent and received Terminate Ack CCP frames, number of processed frames received for uncompress and compress, number of processed bytes received for uncompress and compress, number of uncompressed and compressed frames, number of uncompressed and compressed bytes, number of non processed frames received for uncompress and compress, number of frames with errors in compression and uncompression, number of received and sent Reset Request CCP frames, number of received and sent Reset Ack CCP frames, number of sequence errors in reception and transmission, number of LCB errors in reception and transmission and number of received and sent header errors." INDEX { telProdNpMonIfcPPPCCPStIndex } ::= { telProdNpMonIfcPPPCCPStatsTable 1 } TelProdNpMonIfcPPPCCPStatsEntry ::= SEQUENCE{ telProdNpMonIfcPPPCCPStIndex INTEGER, telProdNpMonIfcPPPCCPStClear INTEGER, telProdNpMonIfcPPPCCPStConfReqRx Counter, telProdNpMonIfcPPPCCPStConfReqTx Counter, telProdNpMonIfcPPPCCPStConfAckRx Counter, telProdNpMonIfcPPPCCPStConfAckTx Counter, telProdNpMonIfcPPPCCPStConfNakRx Counter, telProdNpMonIfcPPPCCPStConfNakTx Counter, telProdNpMonIfcPPPCCPStConfRejRx Counter, telProdNpMonIfcPPPCCPStConfRejTx Counter, telProdNpMonIfcPPPCCPStTermReqRx Counter, telProdNpMonIfcPPPCCPStTermReqTx Counter, telProdNpMonIfcPPPCCPStTermAckRx Counter, telProdNpMonIfcPPPCCPStTermAckTx Counter, telProdNpMonIfcPPPCCPStProcFrsRx Counter, telProdNpMonIfcPPPCCPStProcFrsTx Counter, telProdNpMonIfcPPPCCPStProcBytRx Counter, telProdNpMonIfcPPPCCPStProcBytTx Counter, telProdNpMonIfcPPPCCPStFramesRx Counter, telProdNpMonIfcPPPCCPStFramesTx Counter, telProdNpMonIfcPPPCCPStBytesRx Counter, telProdNpMonIfcPPPCCPStBytesTx Counter, telProdNpMonIfcPPPCCPStUncompFrsRx Counter, telProdNpMonIfcPPPCCPStUncompFrsTx Counter, telProdNpMonIfcPPPCCPStErrorFrsRx Counter, telProdNpMonIfcPPPCCPStErrorFrsTx Counter, telProdNpMonIfcPPPCCPStResetReqRx Counter, telProdNpMonIfcPPPCCPStResetReqTx Counter, telProdNpMonIfcPPPCCPStResetAckRx Counter, telProdNpMonIfcPPPCCPStResetAckTx Counter, telProdNpMonIfcPPPCCPStSeqErrorsRx Counter, telProdNpMonIfcPPPCCPStSeqErrorsTx Counter, telProdNpMonIfcPPPCCPStLCBErrorsRx Counter, telProdNpMonIfcPPPCCPStLCBErrorsTx Counter, telProdNpMonIfcPPPCCPStHdrErrorsRx Counter, telProdNpMonIfcPPPCCPStHdrErrorsTx Counter } telProdNpMonIfcPPPCCPStIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPCCPStatsEntry 1 } telProdNpMonIfcPPPCCPStClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart." ::= { telProdNpMonIfcPPPCCPStatsEntry 2 } telProdNpMonIfcPPPCCPStConfReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received Configure Request CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 3 } telProdNpMonIfcPPPCCPStConfReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent Configure Request CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 4 } telProdNpMonIfcPPPCCPStConfAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received Configure Ack CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 5 } telProdNpMonIfcPPPCCPStConfAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent Configure Ack CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 6 } telProdNpMonIfcPPPCCPStConfNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received Configure Nak CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 7 } telProdNpMonIfcPPPCCPStConfNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent Configure Nak CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 8 } telProdNpMonIfcPPPCCPStConfRejRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received Configure Reject CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 9 } telProdNpMonIfcPPPCCPStConfRejTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent Configure Reject CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 10 } telProdNpMonIfcPPPCCPStTermReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received Terminate Request CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 11 } telProdNpMonIfcPPPCCPStTermReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent Terminate Request CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 12 } telProdNpMonIfcPPPCCPStTermAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received Terminate Ack CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 13 } telProdNpMonIfcPPPCCPStTermAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent Terminate Ack CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 14 } telProdNpMonIfcPPPCCPStProcFrsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of processed frames received for uncompress." ::= { telProdNpMonIfcPPPCCPStatsEntry 15 } telProdNpMonIfcPPPCCPStProcFrsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of processed frames received for compress." ::= { telProdNpMonIfcPPPCCPStatsEntry 16 } telProdNpMonIfcPPPCCPStProcBytRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of processed bytes received for uncompress." ::= { telProdNpMonIfcPPPCCPStatsEntry 17 } telProdNpMonIfcPPPCCPStProcBytTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of processed bytes received for compress." ::= { telProdNpMonIfcPPPCCPStatsEntry 18 } telProdNpMonIfcPPPCCPStFramesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of uncompressed frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 19 } telProdNpMonIfcPPPCCPStFramesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of compressed frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 20 } telProdNpMonIfcPPPCCPStBytesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of uncompressed bytes." ::= { telProdNpMonIfcPPPCCPStatsEntry 21 } telProdNpMonIfcPPPCCPStBytesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of compressed bytes." ::= { telProdNpMonIfcPPPCCPStatsEntry 22 } telProdNpMonIfcPPPCCPStUncompFrsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of non processed frames received for uncompress." ::= { telProdNpMonIfcPPPCCPStatsEntry 23 } telProdNpMonIfcPPPCCPStUncompFrsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of non processed frames received for compress." ::= { telProdNpMonIfcPPPCCPStatsEntry 24 } telProdNpMonIfcPPPCCPStErrorFrsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames whith errors in compression." ::= { telProdNpMonIfcPPPCCPStatsEntry 25 } telProdNpMonIfcPPPCCPStErrorFrsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames whith errors in uncompression." ::= { telProdNpMonIfcPPPCCPStatsEntry 26 } telProdNpMonIfcPPPCCPStResetReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received Reset Request CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 27 } telProdNpMonIfcPPPCCPStResetReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent Reset Request CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 28 } telProdNpMonIfcPPPCCPStResetAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received Reset Ack CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 29 } telProdNpMonIfcPPPCCPStResetAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent Reset Ack CCP frames." ::= { telProdNpMonIfcPPPCCPStatsEntry 30 } telProdNpMonIfcPPPCCPStSeqErrorsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sequence errors in reception." ::= { telProdNpMonIfcPPPCCPStatsEntry 31 } telProdNpMonIfcPPPCCPStSeqErrorsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sequence errors in transmission." ::= { telProdNpMonIfcPPPCCPStatsEntry 32 } telProdNpMonIfcPPPCCPStLCBErrorsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LCB errors in reception." ::= { telProdNpMonIfcPPPCCPStatsEntry 33 } telProdNpMonIfcPPPCCPStLCBErrorsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LCB errors in transmission." ::= { telProdNpMonIfcPPPCCPStatsEntry 34 } telProdNpMonIfcPPPCCPStHdrErrorsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received header errors." ::= { telProdNpMonIfcPPPCCPStatsEntry 35 } telProdNpMonIfcPPPCCPStHdrErrorsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent header errors." ::= { telProdNpMonIfcPPPCCPStatsEntry 36 } -- Grupo de parmetros relacionados con el Multilink PPP (MP). telProdNpMonIfcPPPMPGroup OBJECT IDENTIFIER ::= { telProdNpMonInterfPPP 7 } -- Tabla de parmetros globales del Multilink PPP. telProdNpMonIfcPPPMPControlGloTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPMPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains Multilink PPP global parameters. This table has an entry for each PPP interface. The entry number is determined by the corresponding interface number (table index)." ::= { telProdNpMonIfcPPPMPGroup 1 } telProdNpMonIfcPPPMPControlGloEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPMPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number which is the table index, and variables that shows the remote user name, the number of active links in bundle and the current fragment queue length." INDEX { telProdNpMonIfcPPPMPCtrlGloIndex } ::= { telProdNpMonIfcPPPMPControlGloTable 1 } TelProdNpMonIfcPPPMPControlGloEntry ::= SEQUENCE{ telProdNpMonIfcPPPMPCtrlGloIndex INTEGER, telProdNpMonIfcPPPMPCtrlGloRemUserName DisplayString, telProdNpMonIfcPPPMPCtrlGloBundleLinks INTEGER, telProdNpMonIfcPPPMPCtrlGloFragments INTEGER, telProdNpMonIfcPPPMPCtrlGloRTFragments INTEGER } telProdNpMonIfcPPPMPCtrlGloIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPMPControlGloEntry 1 } telProdNpMonIfcPPPMPCtrlGloRemUserName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "When the authentication is enabled, this variable indicates the remote user name. In other case, it contains a empty string." ::= { telProdNpMonIfcPPPMPControlGloEntry 2 } telProdNpMonIfcPPPMPCtrlGloBundleLinks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the number of active links in bundle." ::= { telProdNpMonIfcPPPMPControlGloEntry 3 } telProdNpMonIfcPPPMPCtrlGloFragments OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the current fragment queue length." ::= { telProdNpMonIfcPPPMPControlGloEntry 4 } telProdNpMonIfcPPPMPCtrlGloRTFragments OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the current fragment queue length for real time traffic." ::= { telProdNpMonIfcPPPMPControlGloEntry 5 } -- Tabla que contiene los parmetros que permiten monitorizar las opciones -- del Multilink PPP. telProdNpMonIfcPPPMPControlOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPMPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the variables that informs about the Multilink PPP options. The entry number is determined by the interface value (table index)." ::= { telProdNpMonIfcPPPMPGroup 2 } telProdNpMonIfcPPPMPControlOptionsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPMPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, the local and remote maximum packet size accepted in reception, if short sequence number header format is enabled in the local and remote end, the local and remote associated class and the local and remote address." INDEX { telProdNpMonIfcPPPMPCtrlOptIndex } ::= { telProdNpMonIfcPPPMPControlOptionsTable 1 } TelProdNpMonIfcPPPMPControlOptionsEntry ::= SEQUENCE{ telProdNpMonIfcPPPMPCtrlOptIndex INTEGER, telProdNpMonIfcPPPMPCtrlOptMRRULoc INTEGER, telProdNpMonIfcPPPMPCtrlOptMRRURem INTEGER, telProdNpMonIfcPPPMPCtrlOptSSNLoc INTEGER, telProdNpMonIfcPPPMPCtrlOptSSNRem INTEGER, telProdNpMonIfcPPPMPCtrlOptClassLoc INTEGER, telProdNpMonIfcPPPMPCtrlOptClassRem INTEGER, telProdNpMonIfcPPPMPCtrlOptAddressLoc DisplayString, telProdNpMonIfcPPPMPCtrlOptAddressRem DisplayString, telprodNpMonIfcPPPMPCtrlOptMHFNeg INTEGER } telProdNpMonIfcPPPMPCtrlOptIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 1 } telProdNpMonIfcPPPMPCtrlOptMRRULoc OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum packet size accepted in reception associated to the local end." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 2 } telProdNpMonIfcPPPMPCtrlOptMRRURem OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum packet size accepted in reception associated to the remote end." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 3 } telProdNpMonIfcPPPMPCtrlOptSSNLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows if the short sequence number header format in the local end is enabled or disabled." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 4 } telProdNpMonIfcPPPMPCtrlOptSSNRem OBJECT-TYPE SYNTAX INTEGER{ non-negotiated(0), yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows if the short sequence number header format in the remote end is enabled or disabled." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 5 } telProdNpMonIfcPPPMPCtrlOptClassLoc OBJECT-TYPE SYNTAX INTEGER{ null-class(0), locally-assigned-address(1), ip-address(2), ethernet-mac-address(3), magic-number(4), public-switched-network-directory-number(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the class associated to the local end." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 6 } telProdNpMonIfcPPPMPCtrlOptClassRem OBJECT-TYPE SYNTAX INTEGER{ null-class(0), locally-assigned-address(1), ip-address(2), ethernet-mac-address(3), magic-number(4), public-switched-network-directory-number(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the class associated to the remote end." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 7 } telProdNpMonIfcPPPMPCtrlOptAddressLoc OBJECT-TYPE SYNTAX DisplayString(SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the address associated to the local end. It is a string that must be interpreted according to the local class." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 8 } telProdNpMonIfcPPPMPCtrlOptAddressRem OBJECT-TYPE SYNTAX DisplayString(SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the address associated to the remote end. It is a string that must be interpreted according to the remote class." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 9 } telprodNpMonIfcPPPMPCtrlOptMHFNeg OBJECT-TYPE SYNTAX INTEGER{ no(1), yes(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows if the multiclass multilink option has been negotiated." ::= { telProdNpMonIfcPPPMPControlOptionsEntry 10 } -- Tabla que contiene los estadsicos correspondientes al Multilink PPP. telProdNpMonIfcPPPMPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPMPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistics of the Multilink PPP. The entry number is determined by the interface number (table index)." ::= { telProdNpMonIfcPPPMPGroup 3 } telProdNpMonIfcPPPMPStatsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPMPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received frames, number of sent and received bytes, number of queued frames, number of error frames and number of sequence loss in reception." INDEX { telProdNpMonIfcPPPMPStIndex } ::= { telProdNpMonIfcPPPMPStatsTable 1 } TelProdNpMonIfcPPPMPStatsEntry ::= SEQUENCE{ telProdNpMonIfcPPPMPStIndex INTEGER, telProdNpMonIfcPPPMPStClear INTEGER, telProdNpMonIfcPPPMPStFramesTx Counter, telProdNpMonIfcPPPMPStFramesRx Counter, telProdNpMonIfcPPPMPStBytesTx Counter, telProdNpMonIfcPPPMPStBytesRx Counter, telProdNpMonIfcPPPMPStQueuedFrm Counter, telProdNpMonIfcPPPMPStErrorFrm Counter, telProdNpMonIfcPPPMPStSeqLoss Counter, telProdNpMonIfcPPPMPStRTFramesTx Counter, telProdNpMonIfcPPPMPStRTFramesRx Counter, telProdNpMonIfcPPPMPStRTBytesTx Counter, telProdNpMonIfcPPPMPStRTBytesRx Counter, telProdNpMonIfcPPPMPStRTQueuedFrm Counter, telProdNpMonIfcPPPMPStRTErrorFrm Counter, telProdNpMonIfcPPPMPStRTSeqLoss Counter } telProdNpMonIfcPPPMPStIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPMPStatsEntry 1 } telProdNpMonIfcPPPMPStClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart." ::= { telProdNpMonIfcPPPMPStatsEntry 2 } telProdNpMonIfcPPPMPStFramesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent frames." ::= { telProdNpMonIfcPPPMPStatsEntry 3 } telProdNpMonIfcPPPMPStFramesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received frames." ::= { telProdNpMonIfcPPPMPStatsEntry 4 } telProdNpMonIfcPPPMPStBytesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent bytes." ::= { telProdNpMonIfcPPPMPStatsEntry 5 } telProdNpMonIfcPPPMPStBytesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received bytes." ::= { telProdNpMonIfcPPPMPStatsEntry 6 } telProdNpMonIfcPPPMPStQueuedFrm OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of queued received frames." ::= { telProdNpMonIfcPPPMPStatsEntry 7 } telProdNpMonIfcPPPMPStErrorFrm OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of rejected frames due to errors." ::= { telProdNpMonIfcPPPMPStatsEntry 8 } telProdNpMonIfcPPPMPStSeqLoss OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sequence loss in reception." ::= { telProdNpMonIfcPPPMPStatsEntry 9 } telProdNpMonIfcPPPMPStRTFramesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent real time frames." ::= { telProdNpMonIfcPPPMPStatsEntry 10 } telProdNpMonIfcPPPMPStRTFramesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received real time frames." ::= { telProdNpMonIfcPPPMPStatsEntry 11 } telProdNpMonIfcPPPMPStRTBytesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sent real time bytes." ::= { telProdNpMonIfcPPPMPStatsEntry 12 } telProdNpMonIfcPPPMPStRTBytesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of received real time bytes." ::= { telProdNpMonIfcPPPMPStatsEntry 13 } telProdNpMonIfcPPPMPStRTQueuedFrm OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of queued received real time frames." ::= { telProdNpMonIfcPPPMPStatsEntry 14 } telProdNpMonIfcPPPMPStRTErrorFrm OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of rejected real time frames due to errors." ::= { telProdNpMonIfcPPPMPStatsEntry 15 } telProdNpMonIfcPPPMPStRTSeqLoss OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of sequence loss in reception of real time frames." ::= { telProdNpMonIfcPPPMPStatsEntry 16 } -- Tabla de parmetros de monitorizacin relacionados con la parte Dial del PPP. telProdNpMonIfcPPPDialTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPDialEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about monitoring parameters associated to Dial part of PPP. The entry number is determined by the PPP interface value and the Dial order number." ::= { telProdNpMonInterfPPP 8 } telProdNpMonIfcPPPDialEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPDialEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the PPP interface number of the node, the Dial order number, the Dial profile name, the remote address, the local address, the number of the interface over the PPP is mounted, the requested circuit identifier, the Dial circuit state and the assigned circuit identifier." INDEX { telProdNpMonIfcPPPDialIfcIndex, telProdNpMonIfcPPPDialOrderIndex } ::= { telProdNpMonIfcPPPDialTable 1 } TelProdNpMonIfcPPPDialEntry ::= SEQUENCE{ telProdNpMonIfcPPPDialIfcIndex INTEGER, telProdNpMonIfcPPPDialOrderIndex INTEGER, telProdNpMonIfcPPPDialName DisplayString, telProdNpMonIfcPPPDialDesAddr DisplayString, telProdNpMonIfcPPPDialLocAddr DisplayString, telProdNpMonIfcPPPDialLowIfc INTEGER, telProdNpMonIfcPPPDialCircReq INTEGER, telProdNpMonIfcPPPDialCircStatus INTEGER, telProdNpMonIfcPPPDialCircAsig INTEGER } telProdNpMonIfcPPPDialIfcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "PPP interface number of the node (first table index)." ::= { telProdNpMonIfcPPPDialEntry 1 } telProdNpMonIfcPPPDialOrderIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dial order number inside the PPP interface (second table index)." ::= { telProdNpMonIfcPPPDialEntry 2 } telProdNpMonIfcPPPDialName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Dial profile name." ::= { telProdNpMonIfcPPPDialEntry 3 } telProdNpMonIfcPPPDialDesAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "If the interface that support the PPP interface is switched, this variable indicates the remote address." ::= { telProdNpMonIfcPPPDialEntry 4 } telProdNpMonIfcPPPDialLocAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "If the interface that support the PPP interface is switched, this variable indicates the local address." ::= { telProdNpMonIfcPPPDialEntry 5 } telProdNpMonIfcPPPDialLowIfc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of the interface the PPP is mounted over. In this case, the interfaces are numbered from 0, the same as in console." ::= { telProdNpMonIfcPPPDialEntry 6 } telProdNpMonIfcPPPDialCircReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "When the interface that support the PPP interface is composed of different subinterfaces, this variable specifies the requested circuit identifier. Its value must be 255 to indicate the choice of the circuit number is free." ::= { telProdNpMonIfcPPPDialEntry 7 } telProdNpMonIfcPPPDialCircStatus OBJECT-TYPE SYNTAX INTEGER{ down(0), closed(1), opening(2), closing(3), open(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Dial circuit state." ::= { telProdNpMonIfcPPPDialEntry 8 } telProdNpMonIfcPPPDialCircAsig OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "When the interface that support the PPP interface is composed of different subinterfaces, this variable specifies the assigned circuit identifier. If the Dial circuit state is not OPEN(4), the requested circuit identifier is shown." ::= { telProdNpMonIfcPPPDialEntry 9 } -- Grupo de parmetros relacionados con los NCPs de datos. telProdNpMonIfcPPPNCPGroup OBJECT IDENTIFIER ::= { telProdNpMonInterfPPP 9 } -- Grupo de parmetros relacionados con el IPCP. telProdNpMonIfcPPPNCPIPCPGroup OBJECT IDENTIFIER ::= { telProdNpMonIfcPPPNCPGroup 1 } -- Tabla que contiene informacin sobre el estado actual del IPCP. telProdNpMonIfcPPPNCPIPCPControlGloTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPNCPIPCPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains IPCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding interface number (table index)." ::= { telProdNpMonIfcPPPNCPIPCPGroup 1 } telProdNpMonIfcPPPNCPIPCPControlGloEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPNCPIPCPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number which is the table index, and a variable that shows the current state of the IPCP protocol." INDEX { telProdNpMonIfcPPPNCPIPCPCtrlGloIndex } ::= { telProdNpMonIfcPPPNCPIPCPControlGloTable 1 } TelProdNpMonIfcPPPNCPIPCPControlGloEntry ::= SEQUENCE{ telProdNpMonIfcPPPNCPIPCPCtrlGloIndex INTEGER, telProdNpMonIfcPPPNCPIPCPCtrlGloState INTEGER } telProdNpMonIfcPPPNCPIPCPCtrlGloIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPNCPIPCPControlGloEntry 1 } telProdNpMonIfcPPPNCPIPCPCtrlGloState OBJECT-TYPE SYNTAX INTEGER{ initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened." ::= { telProdNpMonIfcPPPNCPIPCPControlGloEntry 2 } -- Tabla que contiene los parmetros que permiten monitorizar las opciones -- transmitidas y recibidas en el establecimiento del protocolo de nivel -- de RED. telProdNpMonIfcPPPNCPIPCPControlOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPNCPIPCPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is determined by the interface value (table index)." ::= { telProdNpMonIfcPPPNCPIPCPGroup 2 } telProdNpMonIfcPPPNCPIPCPControlOptionsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPNCPIPCPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, the assigned IP address (in case of dinamic asignation), remote end IP address (if received) and if the Van Jacobson compression option has been selected at any end (local or remote)." INDEX { telProdNpMonIfcPPPNCPIPCPCtrlOptIndex } ::= { telProdNpMonIfcPPPNCPIPCPControlOptionsTable 1 } TelProdNpMonIfcPPPNCPIPCPControlOptionsEntry ::= SEQUENCE{ telProdNpMonIfcPPPNCPIPCPCtrlOptIndex INTEGER, telProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrLoc IpAddress, telProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrRem IpAddress, telProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpLoc INTEGER, telProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpRem INTEGER } telProdNpMonIfcPPPNCPIPCPCtrlOptIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPNCPIPCPControlOptionsEntry 1 } telProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrLoc OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address assigned (supposing dinamic assignation has been selected)." ::= { telProdNpMonIfcPPPNCPIPCPControlOptionsEntry 2 } telProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrRem OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote IP address (supposing it has been received)." ::= { telProdNpMonIfcPPPNCPIPCPControlOptionsEntry 3 } telProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Van Jacobson compression selected or not in the local end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPIPCPControlOptionsEntry 4 } telProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpRem OBJECT-TYPE SYNTAX INTEGER{ non-negotiated(0), yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Van Jacobson compression selected or not in the remote end: (0) non negotiated, (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPIPCPControlOptionsEntry 5 } -- Tabla que contiene los estadsicos correspondientes al protocolo IPCP. telProdNpMonIfcPPPNCPIPCPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPNCPIPCPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistics of the IPCP protocol. The entry number is determined by the interface number (table index)." ::= { telProdNpMonIfcPPPNCPIPCPGroup 3 } telProdNpMonIfcPPPNCPIPCPStatsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPNCPIPCPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received Configure Request NCP frames, number of sent and received Configure Ack NCP frames, number of sent and received Configure Nak NCP frames, number of sent and received Configure Reject NCP frames, number of sent and received Terminate Request NCP frames, number of sent and received Terminate Ack NCP frames." INDEX { telProdNpMonIfcPPPNCPIPCPStIndex } ::= { telProdNpMonIfcPPPNCPIPCPStatsTable 1 } TelProdNpMonIfcPPPNCPIPCPStatsEntry ::= SEQUENCE{ telProdNpMonIfcPPPNCPIPCPStIndex INTEGER, telProdNpMonIfcPPPNCPIPCPStClear INTEGER, telProdNpMonIfcPPPNCPIPCPStConfReqRx Counter, telProdNpMonIfcPPPNCPIPCPStConfReqTx Counter, telProdNpMonIfcPPPNCPIPCPStConfAckRx Counter, telProdNpMonIfcPPPNCPIPCPStConfAckTx Counter, telProdNpMonIfcPPPNCPIPCPStConfNakRx Counter, telProdNpMonIfcPPPNCPIPCPStConfNakTx Counter, telProdNpMonIfcPPPNCPIPCPStConfRejRx Counter, telProdNpMonIfcPPPNCPIPCPStConfRejTx Counter, telProdNpMonIfcPPPNCPIPCPStTermReqRx Counter, telProdNpMonIfcPPPNCPIPCPStTermReqTx Counter, telProdNpMonIfcPPPNCPIPCPStTermAckRx Counter, telProdNpMonIfcPPPNCPIPCPStTermAckTx Counter } telProdNpMonIfcPPPNCPIPCPStIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 1 } telProdNpMonIfcPPPNCPIPCPStClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 2 } telProdNpMonIfcPPPNCPIPCPStConfReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Request NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 3 } telProdNpMonIfcPPPNCPIPCPStConfReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Request NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 4 } telProdNpMonIfcPPPNCPIPCPStConfAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Ack NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 5 } telProdNpMonIfcPPPNCPIPCPStConfAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Ack NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 6 } telProdNpMonIfcPPPNCPIPCPStConfNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Nak NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 7 } telProdNpMonIfcPPPNCPIPCPStConfNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Nak NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 8 } telProdNpMonIfcPPPNCPIPCPStConfRejRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Reject NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 9 } telProdNpMonIfcPPPNCPIPCPStConfRejTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Reject NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 10 } telProdNpMonIfcPPPNCPIPCPStTermReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Request NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 11 } telProdNpMonIfcPPPNCPIPCPStTermReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Request NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 12 } telProdNpMonIfcPPPNCPIPCPStTermAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Ack NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 13 } telProdNpMonIfcPPPNCPIPCPStTermAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Ack NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPIPCPStatsEntry 14 } -- Grupo de parmetros relacionados con el BCP. telProdNpMonIfcPPPNCPBCPGroup OBJECT IDENTIFIER ::= { telProdNpMonIfcPPPNCPGroup 2 } -- Tabla que contiene informacin sobre el estado actual del BCP. telProdNpMonIfcPPPNCPBCPControlGloTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPNCPBCPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains BCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding interface number (table index)." ::= { telProdNpMonIfcPPPNCPBCPGroup 1 } telProdNpMonIfcPPPNCPBCPControlGloEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPNCPBCPControlGloEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number which is the table index, and a variable that shows the current state of the BCP protocol." INDEX { telProdNpMonIfcPPPNCPBCPCtrlGloIndex } ::= { telProdNpMonIfcPPPNCPBCPControlGloTable 1 } TelProdNpMonIfcPPPNCPBCPControlGloEntry ::= SEQUENCE{ telProdNpMonIfcPPPNCPBCPCtrlGloIndex INTEGER, telProdNpMonIfcPPPNCPBCPCtrlGloState INTEGER } telProdNpMonIfcPPPNCPBCPCtrlGloIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPNCPBCPControlGloEntry 1 } telProdNpMonIfcPPPNCPBCPCtrlGloState OBJECT-TYPE SYNTAX INTEGER{ initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened." ::= { telProdNpMonIfcPPPNCPBCPControlGloEntry 2 } -- Tabla que contiene los parmetros que permiten monitorizar las opciones -- transmitidas y recibidas en el establecimiento del protocolo de nivel -- de RED. telProdNpMonIfcPPPNCPBCPControlOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPNCPBCPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is determined by the interface value (table index)." ::= { telProdNpMonIfcPPPNCPBCPGroup 2 } telProdNpMonIfcPPPNCPBCPControlOptionsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPNCPBCPControlOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, local tinygram support and remote tinygram support." INDEX { telProdNpMonIfcPPPNCPBCPCtrlOptIndex } ::= { telProdNpMonIfcPPPNCPBCPControlOptionsTable 1 } TelProdNpMonIfcPPPNCPBCPControlOptionsEntry ::= SEQUENCE{ telProdNpMonIfcPPPNCPBCPCtrlOptIndex INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptLineIdLoc INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptLineIdRem INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptMac8023Loc INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptMac8023Rem INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptMac8025Loc INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptMac8025Rem INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptMacFddiLoc INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptMacFddiRem INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptTinyLoc INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptTinyRem INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptStp8021DLoc INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptStp8021DRem INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbLoc INTEGER, telProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbRem INTEGER } telProdNpMonIfcPPPNCPBCPCtrlOptIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 1 } telProdNpMonIfcPPPNCPBCPCtrlOptLineIdLoc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line Identification configured for SRB on the local end" ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 2 } telProdNpMonIfcPPPNCPBCPCtrlOptLineIdRem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line Identification configured for SRB on the remote end" ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 3 } telProdNpMonIfcPPPNCPBCPCtrlOptMac8023Loc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of IEEE 802.3 frames allowed selected or not in the local end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 4 } telProdNpMonIfcPPPNCPBCPCtrlOptMac8023Rem OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of IEEE 802.3 frames allowed selected or not in the remote end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 5 } telProdNpMonIfcPPPNCPBCPCtrlOptMac8025Loc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of IEEE 802.5 frames allowed selected or not in the local end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 6 } telProdNpMonIfcPPPNCPBCPCtrlOptMac8025Rem OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of IEEE 802.5 frames allowed selected or not in the remote end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 7 } telProdNpMonIfcPPPNCPBCPCtrlOptMacFddiLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of FDDI frames allowed selected or not in the local end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 8 } telProdNpMonIfcPPPNCPBCPCtrlOptMacFddiRem OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of FDDI frames allowed selected or not in the remote end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 9 } telProdNpMonIfcPPPNCPBCPCtrlOptTinyLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Tinygram compress support selected or not in the local end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 10 } telProdNpMonIfcPPPNCPBCPCtrlOptTinyRem OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Tinygram compress support selected or not in the remote end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 11 } telProdNpMonIfcPPPNCPBCPCtrlOptStp8021DLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of 802.1D STP frames allowed selected or not in the local end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 12 } telProdNpMonIfcPPPNCPBCPCtrlOptStp8021DRem OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of 802.1D STP frames allowed selected or not in the remote end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 13 } telProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbLoc OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of IBM SRB STP frames allowed selected or not in the local end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 14 } telProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbRem OBJECT-TYPE SYNTAX INTEGER{ yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Reception of IBM SRB STP frames allowed selected or not in the remote end: (1) yes, (2) no." ::= { telProdNpMonIfcPPPNCPBCPControlOptionsEntry 15 } -- Tabla que contiene los estadsicos correspondientes al protocolo BCP. telProdNpMonIfcPPPNCPBCPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonIfcPPPNCPBCPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains statistics of the BCP protocol. The entry number is determined by the interface number (table index)." ::= { telProdNpMonIfcPPPNCPBCPGroup 3 } telProdNpMonIfcPPPNCPBCPStatsEntry OBJECT-TYPE SYNTAX TelProdNpMonIfcPPPNCPBCPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received Configure Request NCP frames, number of sent and received Configure Ack NCP frames, number of sent and received Configure Nak NCP frames, number of sent and received Configure Reject NCP frames, number of sent and received Terminate Request NCP frames, number of sent and received Terminate Ack NCP frames." INDEX { telProdNpMonIfcPPPNCPBCPStIndex } ::= { telProdNpMonIfcPPPNCPBCPStatsTable 1 } TelProdNpMonIfcPPPNCPBCPStatsEntry ::= SEQUENCE{ telProdNpMonIfcPPPNCPBCPStIndex INTEGER, telProdNpMonIfcPPPNCPBCPStClear INTEGER, telProdNpMonIfcPPPNCPBCPStConfReqRx Counter, telProdNpMonIfcPPPNCPBCPStConfReqTx Counter, telProdNpMonIfcPPPNCPBCPStConfAckRx Counter, telProdNpMonIfcPPPNCPBCPStConfAckTx Counter, telProdNpMonIfcPPPNCPBCPStConfNakRx Counter, telProdNpMonIfcPPPNCPBCPStConfNakTx Counter, telProdNpMonIfcPPPNCPBCPStConfRejRx Counter, telProdNpMonIfcPPPNCPBCPStConfRejTx Counter, telProdNpMonIfcPPPNCPBCPStTermReqRx Counter, telProdNpMonIfcPPPNCPBCPStTermReqTx Counter, telProdNpMonIfcPPPNCPBCPStTermAckRx Counter, telProdNpMonIfcPPPNCPBCPStTermAckTx Counter } telProdNpMonIfcPPPNCPBCPStIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number of the node, that indicates the corresponding table entry (it is the table index)." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 1 } telProdNpMonIfcPPPNCPBCPStClear OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 2 } telProdNpMonIfcPPPNCPBCPStConfReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Request NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 3 } telProdNpMonIfcPPPNCPBCPStConfReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Request NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 4 } telProdNpMonIfcPPPNCPBCPStConfAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Ack NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 5 } telProdNpMonIfcPPPNCPBCPStConfAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Ack NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 6 } telProdNpMonIfcPPPNCPBCPStConfNakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Nak NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 7 } telProdNpMonIfcPPPNCPBCPStConfNakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Nak NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 8 } telProdNpMonIfcPPPNCPBCPStConfRejRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Reject NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 9 } telProdNpMonIfcPPPNCPBCPStConfRejTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Configure Reject NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 10 } telProdNpMonIfcPPPNCPBCPStTermReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Request NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 11 } telProdNpMonIfcPPPNCPBCPStTermReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Request NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 12 } telProdNpMonIfcPPPNCPBCPStTermAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Ack NCP frames received through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 13 } telProdNpMonIfcPPPNCPBCPStTermAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Terminate Ack NCP frames transmitted through the interface number shown in the index." ::= { telProdNpMonIfcPPPNCPBCPStatsEntry 14 } END