-- Teldat, S.A. -- Parque Tecnolgico de Madrid -- 28760, Tres Cantos (Madrid) -- Tlf: +34-918076565 -- Fax: +34-918076521 -- e-mail: id@teldat.com -- MIB privada de Teldat -- MIB de monitorizacin de LLC -- Historial: -- 07/02/14 M.A. Pastor XH 3523. Errors with HP Openview 9.20 -- 1.1 08/07/09 I. Muoz Revisin de todas las MIB para evitar -- M.A. Pastor warnings y errores de compilacin -- 1.0 01/07/04 J. Molina Archivo procedente de LLC.mib -- Historial de LLC.mib: -- 01-10-01 N.Villaseor Traduccin al ingles -- 01-12-00 M.A. Pastor Modificaciones para que pueda ser -- compilada utilizando compiladores -- distintos del de Teldat -- 14-09-00 J. Alvarez Implementacion inicial TELDAT-MON-INTERF-LLC-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB telProdNpMonInterfRouter FROM TELDAT-SW-STRUCTURE-MIB; -- Grupo telProdNpMonInterfLLC telProdNpMonInterfLLC OBJECT IDENTIFIER ::= { telProdNpMonInterfRouter 8 } -- Tabla de borrado de contadores telProdNpMonInterfLLCClearCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonInterfLLCClearCountersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table allows to delete statistics of a LLC interfaz." ::={ telProdNpMonInterfLLC 1 } telProdNpMonInterfLLCClearCountersEntry OBJECT-TYPE SYNTAX TelProdNpMonInterfLLCClearCountersEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { telProdNpMonInterfLLCClearCountersIfc } ::={ telProdNpMonInterfLLCClearCountersTable 1 } TelProdNpMonInterfLLCClearCountersEntry ::= SEQUENCE { telProdNpMonInterfLLCClearCountersIfc INTEGER, telProdNpMonInterfLLCClearCountersCmd INTEGER } telProdNpMonInterfLLCClearCountersIfc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number. Table index" ::={ telProdNpMonInterfLLCClearCountersEntry 1 } telProdNpMonInterfLLCClearCountersCmd OBJECT-TYPE SYNTAX INTEGER{ delete(1), ok(2), error(3), undefined(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Deletes the counters containing LLC statistics. In case the delete operation were correct, the variable will be ok(2). Otherwise, the variable will be error(3)." ::={ telProdNpMonInterfLLCClearCountersEntry 2 } -- Tabla de informacin de SAPs y sesiones abiertas por interfaz telProdNpMonInterfLLCListInterfTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonInterfLLCListInterfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Displays all SAPs opened on this interface, providing also the number of open sessions on each interface." ::={ telProdNpMonInterfLLC 2 } telProdNpMonInterfLLCListInterfEntry OBJECT-TYPE SYNTAX TelProdNpMonInterfLLCListInterfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table index are: Interface and SAP number." INDEX { telProdNpMonInterfLLCListInterfNumIfc,telProdNpMonInterfLLCListInterfNumSAP } ::={ telProdNpMonInterfLLCListInterfTable 1 } TelProdNpMonInterfLLCListInterfEntry ::= SEQUENCE { telProdNpMonInterfLLCListInterfNumIfc INTEGER, telProdNpMonInterfLLCListInterfNumSAP INTEGER, telProdNpMonInterfLLCListInterfNumSess INTEGER } telProdNpMonInterfLLCListInterfNumIfc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number. First table index." ::={ telProdNpMonInterfLLCListInterfEntry 1 } telProdNpMonInterfLLCListInterfNumSAP OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SAP Number. Second table index." ::={ telProdNpMonInterfLLCListInterfEntry 2 } telProdNpMonInterfLLCListInterfNumSess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of active sessions." ::={ telProdNpMonInterfLLCListInterfEntry 3 } -- Tabla de informacin por SAP telProdNpMonInterfLLCListSAPTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonInterfLLCListSAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Display information for the specified SAP on the interface." ::={ telProdNpMonInterfLLC 3 } telProdNpMonInterfLLCListSAPEntry OBJECT-TYPE SYNTAX TelProdNpMonInterfLLCListSAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table index: interface and SAP number." INDEX { telProdNpMonInterfLLCListSAPNumIfc,telProdNpMonInterfLLCListSAPNumSAP } ::={ telProdNpMonInterfLLCListSAPTable 1 } TelProdNpMonInterfLLCListSAPEntry ::= SEQUENCE { telProdNpMonInterfLLCListSAPNumIfc INTEGER, telProdNpMonInterfLLCListSAPNumSAP INTEGER, telProdNpMonInterfLLCListSAPTypeIfc INTEGER, telProdNpMonInterfLLCListSAPT1 INTEGER, telProdNpMonInterfLLCListSAPT2 INTEGER, telProdNpMonInterfLLCListSAPTi INTEGER, telProdNpMonInterfLLCListSAPN2 INTEGER, telProdNpMonInterfLLCListSAPN1 INTEGER, telProdNpMonInterfLLCListSAPN3 INTEGER, telProdNpMonInterfLLCListSAPTw INTEGER, telProdNpMonInterfLLCListSAPNw INTEGER, telProdNpMonInterfLLCListSAPXmtUI Counter, telProdNpMonInterfLLCListSAPRcvdUI Counter, telProdNpMonInterfLLCListSAPXmtTEST Counter, telProdNpMonInterfLLCListSAPRcvdTEST Counter, telProdNpMonInterfLLCListSAPXmtXID Counter, telProdNpMonInterfLLCListSAPRcvdXID Counter, telProdNpMonInterfLLCListSAPXmtI Counter, telProdNpMonInterfLLCListSAPRcvdI Counter, telProdNpMonInterfLLCListSAPXmtRR Counter, telProdNpMonInterfLLCListSAPRcvdRR Counter, telProdNpMonInterfLLCListSAPXmtRNR Counter, telProdNpMonInterfLLCListSAPRcvdRNR Counter, telProdNpMonInterfLLCListSAPXmtREJ Counter, telProdNpMonInterfLLCListSAPRcvdREJ Counter, telProdNpMonInterfLLCListSAPXmtSABME Counter, telProdNpMonInterfLLCListSAPRcvdSABME Counter, telProdNpMonInterfLLCListSAPXmtUA Counter, telProdNpMonInterfLLCListSAPRcvdUA Counter, telProdNpMonInterfLLCListSAPXmtDISC Counter, telProdNpMonInterfLLCListSAPRcvdDISC Counter, telProdNpMonInterfLLCListSAPXmtDM Counter, telProdNpMonInterfLLCListSAPRcvdDM Counter, telProdNpMonInterfLLCListSAPXmtFRMR Counter, telProdNpMonInterfLLCListSAPRcvdFRMR Counter, telProdNpMonInterfLLCListSAPDiscarded Counter, telProdNpMonInterfLLCListSAPRefused Counter, telProdNpMonInterfLLCListSAPNumOpenSess INTEGER, telProdNpMonInterfLLCListSAPNumActivSess INTEGER, telProdNpMonInterfLLCListSAPIdSess DisplayString } telProdNpMonInterfLLCListSAPNumIfc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface number. First table index." ::={ telProdNpMonInterfLLCListSAPEntry 1 } telProdNpMonInterfLLCListSAPNumSAP OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SAP number. Second table index." ::={ telProdNpMonInterfLLCListSAPEntry 2 } telProdNpMonInterfLLCListSAPTypeIfc OBJECT-TYPE SYNTAX INTEGER{ vi(0), pn(1), pri(2), xeth(3), arpa(4), chp(5), astm(6), eth(7), sl(8), x28(9), dmr(10), tkr(11), snk(12), x25(13), man(14), atr(15), fddi(16), srly(17), ippn(18), fr(19), ppp(20), bdg(21), null(22), gwt-ntype-b-isdn(23), sdlc(24), v25b(25), r-n(26), n-r(27), rdsid(28), xot(29), a270(30), tnip(31), mppp(32), atm(33), subatm(34) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface type. VI (0) VI LNI PN (1) ProNET PRI (2) PRI IFC XETH (3) Experimental EtherNet (3 MBit) ARPA (4) ARPANet CHP (5) CHAOS protocol net ASTM (6) ASTM line interface Eth (7) EtherNet (10 MBit) SL (8) New serial line link X28 (9) X.28 DMR (10) DEC DMR interface TKR (11) 802.5 token ring SNK (12) Sink network (not a real network) X25 (13) X25 network MAN (14) 802.6 metro area network ATR (15) Apollo Token Ring FDDI (16) FDDI SRLY (17) SDLC relay int IPPN (18) IP Protocol Net FR (19) Frame Relay network PPP (20) PPP network BDG (21) Bridging pseudo-handler NULL (22) Null device GWT-NTYPE-B-ISDN (23) ISDN network channel B SDLC (24) TRUE SDLC int V25B (25) V.25bis base network R->N (26) Teldat Micro-node N->R (27) Teldat Router RDSID (28) ISDN D Channel XOT (29) 270 (30) TNIP (31) Interface real IP tunnel MPPP (32) Interface Multilink PPP ATM (33) Interface ATM SUBATM (34) Subinterface ATM." ::={ telProdNpMonInterfLLCListSAPEntry 3 } telProdNpMonInterfLLCListSAPT1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time it takes for this timer to expire when the LLC fails to receive an acknowledgment or response from the other LLC station. In case it were 0, it woeld not be active." ::={ telProdNpMonInterfLLCListSAPEntry 4 } telProdNpMonInterfLLCListSAPT2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time delay the LLC uses before sending an ACK for a received I-frame. In case it were 0, it would not be active." ::={ telProdNpMonInterfLLCListSAPEntry 5 } telProdNpMonInterfLLCListSAPTi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time the LLC waits during inactivity before issuing an RR. In case it were 0, it would not be active." ::={ telProdNpMonInterfLLCListSAPEntry 6 } telProdNpMonInterfLLCListSAPN2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of retries by the LLC protocol." ::={ telProdNpMonInterfLLCListSAPEntry 7 } telProdNpMonInterfLLCListSAPN1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Data (in bytes) allowed in the I-field of an LLC2 frame." ::={ telProdNpMonInterfLLCListSAPEntry 8 } telProdNpMonInterfLLCListSAPN3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value that is used with T2 timer to reduce acknowledgment traffic for received I-frames." ::={ telProdNpMonInterfLLCListSAPEntry 9 } telProdNpMonInterfLLCListSAPTw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "I-frames that can be sent before receiving an RR." ::={ telProdNpMonInterfLLCListSAPEntry 10 } telProdNpMonInterfLLCListSAPNw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "I-frames that the LLC must receive before incrementing Ww by 1." ::={ telProdNpMonInterfLLCListSAPEntry 11 } telProdNpMonInterfLLCListSAPXmtUI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type UI transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 12 } telProdNpMonInterfLLCListSAPRcvdUI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type UI received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 13 } telProdNpMonInterfLLCListSAPXmtTEST OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type TEST transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 14 } telProdNpMonInterfLLCListSAPRcvdTEST OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type TEST received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 15 } telProdNpMonInterfLLCListSAPXmtXID OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type XID transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 16 } telProdNpMonInterfLLCListSAPRcvdXID OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type XID received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 17 } telProdNpMonInterfLLCListSAPXmtI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type I transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 18 } telProdNpMonInterfLLCListSAPRcvdI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type I received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 19 } telProdNpMonInterfLLCListSAPXmtRR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type RR transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 20 } telProdNpMonInterfLLCListSAPRcvdRR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type RR received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 21 } telProdNpMonInterfLLCListSAPXmtRNR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type RNR transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 22 } telProdNpMonInterfLLCListSAPRcvdRNR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type RNR received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 23 } telProdNpMonInterfLLCListSAPXmtREJ OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type REJ transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 24 } telProdNpMonInterfLLCListSAPRcvdREJ OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type REJ received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 25 } telProdNpMonInterfLLCListSAPXmtSABME OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type SABME transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 26 } telProdNpMonInterfLLCListSAPRcvdSABME OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type SABME received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 27 } telProdNpMonInterfLLCListSAPXmtUA OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type UA transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 28 } telProdNpMonInterfLLCListSAPRcvdUA OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type UA received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 29 } telProdNpMonInterfLLCListSAPXmtDISC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type DISC transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 30 } telProdNpMonInterfLLCListSAPRcvdDISC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type DISC received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 31 } telProdNpMonInterfLLCListSAPXmtDM OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type DM transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 32 } telProdNpMonInterfLLCListSAPRcvdDM OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type DM received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 33 } telProdNpMonInterfLLCListSAPXmtFRMR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type FRMR transmitted (Xmt)." ::={ telProdNpMonInterfLLCListSAPEntry 34 } telProdNpMonInterfLLCListSAPRcvdFRMR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type FRMR received (Rcvd)." ::={ telProdNpMonInterfLLCListSAPEntry 35 } telProdNpMonInterfLLCListSAPDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "I-frames discarded by LLC, normally because the sequence number is out of sequence." ::={ telProdNpMonInterfLLCListSAPEntry 36 } telProdNpMonInterfLLCListSAPRefused OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "I-frames discarded by the software above the LLC. For example: LNM (LAN Network Manager) and DLSw (Data Link Switching)." ::={ telProdNpMonInterfLLCListSAPEntry 37 } telProdNpMonInterfLLCListSAPNumOpenSess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sessions that were opened over this SAP." ::={ telProdNpMonInterfLLCListSAPEntry 38 } telProdNpMonInterfLLCListSAPNumActivSess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Currently active sessions running over the interface." ::={ telProdNpMonInterfLLCListSAPEntry 39 } telProdNpMonInterfLLCListSAPIdSess OBJECT-TYPE SYNTAX DisplayString(SIZE(0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "Session ID for the interface." ::={ telProdNpMonInterfLLCListSAPEntry 40 } -- Tabla de informacin por sesiones telProdNpMonInterfLLCListSessTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonInterfLLCListSessEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Displays information for the specific LLC session opened on the interface." ::={ telProdNpMonInterfLLC 4 } telProdNpMonInterfLLCListSessEntry OBJECT-TYPE SYNTAX TelProdNpMonInterfLLCListSessEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table index is by order of session appearance." INDEX { telProdNpMonInterfLLCListSessInd } ::={ telProdNpMonInterfLLCListSessTable 1 } TelProdNpMonInterfLLCListSessEntry ::= SEQUENCE { telProdNpMonInterfLLCListSessInd INTEGER, telProdNpMonInterfLLCListSessIdSess DisplayString, telProdNpMonInterfLLCListSessRemoteMAC DisplayString, telProdNpMonInterfLLCListSessSourceMAC DisplayString, telProdNpMonInterfLLCListSessRemoteSAP INTEGER, telProdNpMonInterfLLCListSessLocalSAP INTEGER, telProdNpMonInterfLLCListSessRIF DisplayString, telProdNpMonInterfLLCListSessPriority INTEGER, telProdNpMonInterfLLCListSessState INTEGER, telProdNpMonInterfLLCListSessT1 INTEGER, telProdNpMonInterfLLCListSessT2 INTEGER, telProdNpMonInterfLLCListSessTi INTEGER, telProdNpMonInterfLLCListSessN1 INTEGER, telProdNpMonInterfLLCListSessN2 INTEGER, telProdNpMonInterfLLCListSessN3 INTEGER, telProdNpMonInterfLLCListSessTw INTEGER, telProdNpMonInterfLLCListSessWw INTEGER, telProdNpMonInterfLLCListSessNw INTEGER, telProdNpMonInterfLLCListSessVs INTEGER, telProdNpMonInterfLLCListSessVr INTEGER, telProdNpMonInterfLLCListSessVa INTEGER, telProdNpMonInterfLLCListSessACKpend INTEGER, telProdNpMonInterfLLCListSessTXpend INTEGER, telProdNpMonInterfLLCListSessLocalBusy INTEGER, telProdNpMonInterfLLCListSessRemoteBusy INTEGER, telProdNpMonInterfLLCListSessRetryCount INTEGER, telProdNpMonInterfLLCListSessApOuFlStop INTEGER, telProdNpMonInterfLLCListSessSeProRunning INTEGER, telProdNpMonInterfLLCListSessXmtI Counter, telProdNpMonInterfLLCListSessRcvdI Counter, telProdNpMonInterfLLCListSessXmtRR Counter, telProdNpMonInterfLLCListSessRcvdRR Counter, telProdNpMonInterfLLCListSessXmtRNR Counter, telProdNpMonInterfLLCListSessRcvdRNR Counter, telProdNpMonInterfLLCListSessXmtREJ Counter, telProdNpMonInterfLLCListSessRcvdREJ Counter, telProdNpMonInterfLLCListSessDiscarded Counter, telProdNpMonInterfLLCListSessRefused Counter } telProdNpMonInterfLLCListSessInd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry number. Table index." ::={ telProdNpMonInterfLLCListSessEntry 1 } telProdNpMonInterfLLCListSessIdSess OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Session ID for the interface. Written with format XX-XX-XXXX in hexadecimal, the two first digits indicate the interface, the two next the SAP number, and the last four the session number." ::={ telProdNpMonInterfLLCListSessEntry 2 } telProdNpMonInterfLLCListSessRemoteMAC OBJECT-TYPE SYNTAX DisplayString(SIZE(0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Router remote LLC MAC addresss." ::={ telProdNpMonInterfLLCListSessEntry 3 } telProdNpMonInterfLLCListSessSourceMAC OBJECT-TYPE SYNTAX DisplayString(SIZE(0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "Router local LLC MAC address." ::={ telProdNpMonInterfLLCListSessEntry 4 } telProdNpMonInterfLLCListSessRemoteSAP OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Router remote SAP address for the LLC connection." ::={ telProdNpMonInterfLLCListSessEntry 5 } telProdNpMonInterfLLCListSessLocalSAP OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Router local SAP address for the LLC connection." ::={ telProdNpMonInterfLLCListSessEntry 6 } telProdNpMonInterfLLCListSessRIF OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "RIF of the frame." ::={ telProdNpMonInterfLLCListSessEntry 7 } telProdNpMonInterfLLCListSessPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority of the packet. 0-7 for upper layer control." ::={ telProdNpMonInterfLLCListSessEntry 8 } telProdNpMonInterfLLCListSessState OBJECT-TYPE SYNTAX INTEGER{ link-closed(1), disconnected(2), link-opening(3), disconnecting(4), frmr-sent(5), link-opened(6), local-busy(7), rejection(8), checkpointing(9), ckpt-lb(10), ckpt-rej(11), resetting(12), remote-busy(13), lb-rb(14), rej-lb(15), rej-rb(16), ckpt-rej-lb(17), ckpt-clr(18), ckpt-rej-clr(19), rej-lb-rb(20), frmr-received(21) } ACCESS read-only STATUS mandatory DESCRIPTION "The finite state(s) that results from interaction between the LLC peers: LINK-CLOSED (1): The remote LLC peer is not known to the local LLC peer and is considered as not existing. DISCONNECTED (2): The local LLC peer is known to the other peer.This LLC peer can send and receive XID, TEST, SABME, and DISC commands; and XID TEST, UA, and DM responses. LINK-OPENING (3): The state of the local LLC peer after sending a SABME or UA in response to a received SABME. DISCONNECTING (4): The state of the local LLC after sending a DISC command to the remote LLC peer. FRMR-SENT (5): The local LLC peer has entered the frame reject exception state and has sent a FRMR response across the link. LINK-OPENED (6): The local LLC peer is in the data transfer phase. LOCAL-BUSY (7): The local LLC peer is unable to receive additional I-frames. REJECTION (8): A local LLC peer that has received one or more out-of-sequence I-frames. CHECKPOINTING (9): The local LLC peer has sent a poll to the remote LLC peer and is waiting for an appropiate response. CKPT-LB (10): Combination of checkpointing and local busy states. CKPT-REJ (11): Combination of checkpointing and rejection states. RESETTING (12): The local LLC peer has received a SABME and is reestablishing the link. REMOTE-BUSY (13): The state that occurs when an RNR is received from the remote LLC peer. LB-RB (14): Combination of Local-Busy and Remote-Busy states. REJ-LB (15): Combination of rejection and Local-Busy states. REJ-RB (16): Combination of rejection and Remote-Busy states. CKPT-REJ-LB (17): Combination of checkpointing, rejection, and Local-Busy states. CKPT-CLR (18): Combination state resulting from the termination of a Local-Busy condition while the LLC peer is CKPT-LB. CKPT-REJ-CLR (19): Combination state resulting from the transfer of an unconfirmed Local-Busy clear while the link station is in the CKPT-REJ-LB state. REJ-LB-RB (20): Combination of the rejection, Local-Busy, and Remote-Busy states. FRMR-RECEIVED (21): The local LLC peer has received an FRMR response from the remote LLC peer." ::={ telProdNpMonInterfLLCListSessEntry 9 } telProdNpMonInterfLLCListSessT1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time it takes for this timer to expire when the LLC fails to receive an acknowledgment or response from the other LLC station." ::={ telProdNpMonInterfLLCListSessEntry 10 } telProdNpMonInterfLLCListSessT2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time delay the LLC uses before sending an ACK for a received I-frame." ::={ telProdNpMonInterfLLCListSessEntry 11 } telProdNpMonInterfLLCListSessTi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time the LLC waits during inactivity before issuing an RR." ::={ telProdNpMonInterfLLCListSessEntry 12 } telProdNpMonInterfLLCListSessN1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum size of the data field (in bytes) of a frame. Default is the size of the interface." ::={ telProdNpMonInterfLLCListSessEntry 13 } telProdNpMonInterfLLCListSessN2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the LLC transmits an RR without receiving an acknowledgment." ::={ telProdNpMonInterfLLCListSessEntry 14 } telProdNpMonInterfLLCListSessN3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Value that is used with T2 timer to reduce acknowledgement traffic for received I-frames." ::={ telProdNpMonInterfLLCListSessEntry 15 } telProdNpMonInterfLLCListSessTw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-frames that can be sent before receiving an RR." ::={ telProdNpMonInterfLLCListSessEntry 16 } telProdNpMonInterfLLCListSessWw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-frames that are sent before receiving an RR. This can be less than Tw during the dynamic window algorithm." ::={ telProdNpMonInterfLLCListSessEntry 17 } telProdNpMonInterfLLCListSessNw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of acknowledgements to initialize Ww." ::={ telProdNpMonInterfLLCListSessEntry 18 } telProdNpMonInterfLLCListSessVs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Send state variable (Ns value for the next I-frame to be transferred)." ::={ telProdNpMonInterfLLCListSessEntry 19 } telProdNpMonInterfLLCListSessVr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Receive state variable (next in-sequence Ns to be accepted)." ::={ telProdNpMonInterfLLCListSessEntry 20 } telProdNpMonInterfLLCListSessVa OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Acknowledged state variable (last valid Nr received)." ::={ telProdNpMonInterfLLCListSessEntry 21 } telProdNpMonInterfLLCListSessACKpend OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Transmited I-frames waiting for acknowledgment." ::={ telProdNpMonInterfLLCListSessEntry 22 } telProdNpMonInterfLLCListSessTXpend OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames waiting to be transmited." ::={ telProdNpMonInterfLLCListSessEntry 23 } telProdNpMonInterfLLCListSessLocalBusy OBJECT-TYPE SYNTAX INTEGER{ no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The router local LLC connection is sending RNRs. YES(1), NO(0)." ::={ telProdNpMonInterfLLCListSessEntry 24 } telProdNpMonInterfLLCListSessRemoteBusy OBJECT-TYPE SYNTAX INTEGER{ no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The router remote LLC is receiving RNRs. YES(1), NO(0)." ::={ telProdNpMonInterfLLCListSessEntry 25 } telProdNpMonInterfLLCListSessRetryCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of the retry of the counter in the LLC protocol." ::={ telProdNpMonInterfLLCListSessEntry 26 } telProdNpMonInterfLLCListSessApOuFlStop OBJECT-TYPE SYNTAX INTEGER{ no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "LLC has told the application to stop giving it outgoing data frames. YES(1), NO(0)." ::={ telProdNpMonInterfLLCListSessEntry 27 } telProdNpMonInterfLLCListSessSeProRunning OBJECT-TYPE SYNTAX INTEGER{ no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This process runs concurrently with all other frame actions and takes I-frames in the transmit queue and sends them. YES(1), NO(0)." ::={ telProdNpMonInterfLLCListSessEntry 28 } telProdNpMonInterfLLCListSessXmtI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type I transmitted." ::={ telProdNpMonInterfLLCListSessEntry 29 } telProdNpMonInterfLLCListSessRcvdI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type I received." ::={ telProdNpMonInterfLLCListSessEntry 30 } telProdNpMonInterfLLCListSessXmtRR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type RR transmitted." ::={ telProdNpMonInterfLLCListSessEntry 31 } telProdNpMonInterfLLCListSessRcvdRR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type RR received." ::={ telProdNpMonInterfLLCListSessEntry 32 } telProdNpMonInterfLLCListSessXmtRNR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type RNR transmitted." ::={ telProdNpMonInterfLLCListSessEntry 33 } telProdNpMonInterfLLCListSessRcvdRNR OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type RNR received." ::={ telProdNpMonInterfLLCListSessEntry 34 } telProdNpMonInterfLLCListSessXmtREJ OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type REJ transmitted." ::={ telProdNpMonInterfLLCListSessEntry 35 } telProdNpMonInterfLLCListSessRcvdREJ OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Frames type REJ received." ::={ telProdNpMonInterfLLCListSessEntry 36 } telProdNpMonInterfLLCListSessDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "I-frames discarded by the LLC, usually because the sequence number is wrong." ::={ telProdNpMonInterfLLCListSessEntry 37 } telProdNpMonInterfLLCListSessRefused OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "I-frames discarded by the software above the LLC.For example, LNM (LAN Network Manager) and DLSw (Data Link Switching)." ::={ telProdNpMonInterfLLCListSessEntry 38 } -- Tabla de set de parametros para protocolo LLC telProdNpMonInterfLLCSetTable OBJECT-TYPE SYNTAX SEQUENCE OF TelProdNpMonInterfLLCSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dynamically configures the LLC parameters on a current LLC session. Changes that you make to the parameters are effective for the life of session." ::={ telProdNpMonInterfLLC 5 } telProdNpMonInterfLLCSetEntry OBJECT-TYPE SYNTAX TelProdNpMonInterfLLCSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { telProdNpMonInterfLLCSetInd} ::={ telProdNpMonInterfLLCSetTable 1 } TelProdNpMonInterfLLCSetEntry ::= SEQUENCE { telProdNpMonInterfLLCSetInd INTEGER, telProdNpMonInterfLLCSetIdSess DisplayString, telProdNpMonInterfLLCSetN2 INTEGER, telProdNpMonInterfLLCSetN3 INTEGER, telProdNpMonInterfLLCSetNw INTEGER, telProdNpMonInterfLLCSetT1 INTEGER, telProdNpMonInterfLLCSetT2 INTEGER, telProdNpMonInterfLLCSetTi INTEGER, telProdNpMonInterfLLCSetTw INTEGER } telProdNpMonInterfLLCSetInd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry number. It is the index." ::={ telProdNpMonInterfLLCSetEntry 1 } telProdNpMonInterfLLCSetIdSess OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "Session identifier." ::={ telProdNpMonInterfLLCSetEntry 2 } telProdNpMonInterfLLCSetN2 OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of times the LLC protocol transmits an RR without receiving an acknowledgment when the inactivity timer expires. The range is 1 to 127. Default is 8." DEFVAL { 8 } ::={ telProdNpMonInterfLLCSetEntry 3 } telProdNpMonInterfLLCSetN3 OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This value is used with the T2 timer to reduce acknowledgment traffic for received I-frames. Set this counter to a specified value. Each time an I-frame is received, this value is decremented. When this counter reaches 0, or the T2 timer expires, an acknowledgment is sent. The range is 1 to 255. Default is 1." DEFVAL { 1 } ::={ telProdNpMonInterfLLCSetEntry 4 } telProdNpMonInterfLLCSetNw OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "When the ability to send I-frames is not working, the LLC protocol goes into a mode where the working window (Ww) is set back to 1, and is then slowly increased back to its normal size (Tw). This is known as the dynamic window algorithm. This value is the number of I-frames that the LLC must receive before incrementing Ww by 1. The range is 1 to 127. Default is 1." DEFVAL { 1 } ::={ telProdNpMonInterfLLCSetEntry 5 } telProdNpMonInterfLLCSetT1 OBJECT-TYPE SYNTAX INTEGER(1..256) ACCESS read-write STATUS mandatory DESCRIPTION "This timer expires when the LLC fails to receive a required acknowledgment or response from the other LLC station. When this timer expires, an RR is sent with the poll bit set and T1 is started again. If the LLC receives no response after the configured maximum number of retries (N2), the link underneath is declared inoperative. The range is 1 to 256. Default is 1." DEFVAL { 1 } ::={ telProdNpMonInterfLLCSetEntry 6 } telProdNpMonInterfLLCSetT2 OBJECT-TYPE SYNTAX INTEGER(1..2560) ACCESS read-write STATUS mandatory DESCRIPTION "This timer is used to delay sending of an acknowledgment for a received I-format frame. This timer is started when an I-frame is received and reset when an acknowledgment is sent. If this timer expires, LLC2 sends an acknowledgment as soon as possible. Set this value so that it is less than that of T1. This insures that the remote LLC2 peer receives the delayed acknowledgment before the T1 timer expires. The range is 1 to 2,560. Default is 1 (100 ms)." DEFVAL { 1 } ::={ telProdNpMonInterfLLCSetEntry 7 } telProdNpMonInterfLLCSetTi OBJECT-TYPE SYNTAX INTEGER(1..256) ACCESS read-write STATUS mandatory DESCRIPTION "This timer expires when the LLC does not receive a frame for a specified time period. When this timer expires the LLC transmits an RR until the other LLC responds or the N2 timer expires. The range is 1 to 256. Default is 30 seconds." DEFVAL { 30 } ::={ telProdNpMonInterfLLCSetEntry 8 } telProdNpMonInterfLLCSetTw OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "Sets the maximum number of I-frames that can be sent before receiving an RR. Assuming that the other end of the LLC session can actually receive this many consecutive I-frames, and the router has enough heap memory to keep copies of these frames until an acknowledgment is received, increasing this value may increase the throughput. The range is 1 to 127. Default is 2." DEFVAL { 2 } ::={ telProdNpMonInterfLLCSetEntry 9 } END