-- Version 2.15.1.1, modified 2001-05-31 17:28:43-04 T1E1-OPT-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- Codex MIB Group definitions codex OBJECT IDENTIFIER ::= { enterprises 449 } cdxProductSpecific OBJECT IDENTIFIER ::= { codex 2 } cdx6500 OBJECT IDENTIFIER ::= { cdxProductSpecific 1 } cdx6500Configuration OBJECT IDENTIFIER ::= { cdx6500 2 } cdx6500CfgProtocolGroup OBJECT IDENTIFIER ::= { cdx6500Configuration 1 } cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER ::= { cdx6500CfgProtocolGroup 1 } cdx6500PCTT1E1PortTable OBJECT IDENTIFIER ::= { cdx6500PCTPortProtocolGroup 24 } cdx6500Statistics OBJECT IDENTIFIER ::= { cdx6500 3 } cdx6500StatProtocolGroup OBJECT IDENTIFIER ::= { cdx6500Statistics 1 } cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER ::= { cdx6500StatProtocolGroup 1 } cdx6500PSTT1E1PortTable OBJECT IDENTIFIER ::= { cdx6500PSTPortProtocolGroup 25 } -- Textual Conventions DisplayString ::= OCTET STRING PhysicalPortNumber ::= INTEGER (49..50) VirtualPortNumber ::= INTEGER (100..255) -- The T1E1 Virtual Port mapping Table cdx6500VPCTT1E1PortTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500VPCTT1E1PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the T1/E1 Virtual Port Mapping Table parameters." ::= { cdx6500PCTT1E1PortTable 3 } cdx6500VPCTT1E1PortEntry OBJECT-TYPE SYNTAX Cdx6500VPCTT1E1PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Virtual T1/E1 Port Mapping Table Entry.Each entry contains the configuration parameters for a single T1/E1 virtual port." INDEX { cdx6500VPCTT1E1CfgIndex } ::= { cdx6500VPCTT1E1PortTable 1 } Cdx6500VPCTT1E1PortEntry ::= SEQUENCE { cdx6500VPCTT1E1CfgPortNumber INTEGER, cdx6500VPCTT1E1CfgPortType INTEGER, cdx6500VPCTT1E1CfgPhyPortNumber INTEGER, cdx6500VPCTT1E1CfgTimeSlotNumber INTEGER, cdx6500VPCTT1E1CfgDS0Rate INTEGER, cdx6500VPCTT1E1CfgAggregateType INTEGER, cdx6500VPCTT1E1CfgSOPortNumber INTEGER, cdx6500VPCTT1E1CfgBChannel INTEGER, cdx6500VPCTT1E1CfgLocalSubscriberAddress DisplayString, cdx6500VPCTT1E1CfgNetSpecCall INTEGER, cdx6500VPCTT1E1CfgPartyNumberType INTEGER, cdx6500VPCTT1E1CfgPartyNumberPlan INTEGER, cdx6500VPCTT1E1CfgIndex INTEGER } cdx6500VPCTT1E1CfgPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a T1/E1 virtual port number this channel is associated with. A value of 0 implies that this parameter was skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 1 } cdx6500VPCTT1E1CfgPortType OBJECT-TYPE SYNTAX INTEGER { voice (1), data (2), switchedVoice (3), switchedData (4), bypassVoice (5), bypassData (6), nc (100) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the type of virtual port. voice : The virtual voice port operates on a configured DS0. data : The virtual data port operates on a configured DS0. switchedVoice : The virtual voice port operates on a DS0 determined by the ISDN/QSIG D Channel. switchedData : The virtual data port operates on a DS0 determined by the ISDN/QSIG D Channel. nc : Skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 2 } cdx6500VPCTT1E1CfgPhyPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the E1 or T1 port number this channel is associated with. A value of 0 implies that this parameter was skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 3 } cdx6500VPCTT1E1CfgTimeSlotNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time slot assignment for the logical channel. T1 ports have time slots in the range (1..24) while E1 ports have time slots in the range (1..31). In addition, Time Slot 16 is not allowed (invalid) for E1 ports. A value of 0 implies that this parameter was skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 4 } cdx6500VPCTT1E1CfgDS0Rate OBJECT-TYPE SYNTAX INTEGER { ds056k (1), ds064k (2), nc (100) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the number of valid data bits within each DS0 for this port. ds056k : 7 bits of the DS0 contains data information, the 8th bit is used for 1's density. ds064k : All 8 bits of the DS0 contain data information. DS0 Rate for ports configured with port type `voice' is always 64K, while for ports configured with port type `data', it is 56K or 64K, the default being 56K. nc : Skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 5 } cdx6500VPCTT1E1CfgAggregateType OBJECT-TYPE SYNTAX INTEGER { t1e1 (1), so (2), nc (100) } ACCESS read-only STATUS mandatory DESCRIPTION "Selects the type of physical interface for the Virtual Port. t1e1 : The physical interface is a T1 or E1 card. so : The physical interface is a SO card. nc : Skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 6 } cdx6500VPCTT1E1CfgSOPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the port number of the SO interface this virtual port is associated with. A value of 0 implies that this parameter was skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 7 } cdx6500VPCTT1E1CfgBChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the B-channel on the SO interface this virtual port is associated with. A value of 0 implies that this parameter was skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 8 } cdx6500VPCTT1E1CfgLocalSubscriberAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the Local Subscriber Address for this virtual port. For Incoming Call: The Called Party number received by the aggregate interface is compared to this parameter. For Outgoing Call: This will be passed as the outgoing Calling Party number. Enter a trailing asterisk(*) as a wild-card. Use the space bar to blank the parameter. 1 to 20 characters (valid characters are 0 through 9, '-', ',', '/', '(', ')', and '*'). The characters '-', ',', '(', ')', and '/' are allowed only for ease of reading." ::= { cdx6500VPCTT1E1PortEntry 9 } cdx6500VPCTT1E1CfgNetSpecCall OBJECT-TYPE SYNTAX INTEGER { none (1), attSdn (2), attMc800 (3), attMc (4), ntFx (5), ntTieTrunk (6), attAccunet (7), attInt800 (9), attMq (17), nc (100) } ACCESS read-only STATUS mandatory DESCRIPTION "Select the network specific call-by-call feature. none : No network-specific facility. attSdn : AT&T Software Defined Network or Northern Tel Private Net. attMc800 : AT&T Megacom800 or Northern Tel InWats. attMc : AT&T Megcom or Northern Tel OutWats. ntFx : Northern Tel Foreign Exchange. ntTieTrunk : Northern Tel Tie Trunk. attAccunet : AT&T Accunet. attInt800 : AT&T International 800 Service. attMq : AT&T MultiQuest or NT TRO call. nc : Skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 10 } cdx6500VPCTT1E1CfgPartyNumberType OBJECT-TYPE SYNTAX INTEGER { unknown (1), international (2), national (3), subscriber (5), abbreviated (7), nc (100) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the Calling/Called party Number Type as defined by ITU-T. unknown : Unknown number type. international : International number. national : National number. subscriber : Subscriber number. abbreviated : Abbreviated number. nc : Skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 11 } cdx6500VPCTT1E1CfgPartyNumberPlan OBJECT-TYPE SYNTAX INTEGER { unknown (1), isdn (2), telephony (3), private (10), nc (100) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the Calling/Called party Numbering Plan as defined by ITU-T. unknown : Unknown numbering plan. isdn : Recommendation E.164/E.163. telephony : Telephony numbering plan. private : Private numbering plan. nc : Skipped during configuration." ::= { cdx6500VPCTT1E1PortEntry 12 } cdx6500VPCTT1E1CfgIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the entry number in the Virtual Port Mapping Table." ::= { cdx6500VPCTT1E1PortEntry 13 } END