SYS-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue FROM SNMPv2-TC OBJECT-TYPE FROM RFC-1212 Gauge, IpAddress, TimeTicks, Counter, enterprises FROM RFC1155-SMI DisplayString FROM RFC1213-MIB rs232PortIndex FROM RS232-MIB TRAP-TYPE FROM RFC-1215 Gauge32 FROM SNMPv2-SMI; -- sysMIB MODULE-IDENTITY -- LAST-UPDATED "9812230000Z" -- ORGANIZATION "Northrop Grumman-Canada, Ltd." -- CONTACT-INFO -- " Fulko K. Hew -- -- Postal: Northrop Grumman-Canada, Ltd. -- 777 Walkers Line -- Burlington, Ontario -- Canada -- L7N 2G1 -- -- Tel: +1 905 333 6000 -- Fax: +1 905 333 6050 -- -- E-mail: fulko@ngcan.com" -- DESCRIPTION -- "The MIB module to describe generic MIB II like objects. -- Although this is derived from the original MIB II definition -- as per RFC 1213, it has been updated to make it more useful -- especially with respect to TIGER operation." ngcan OBJECT IDENTIFIER ::= { enterprises 1978 } -- Northrop Grumman-Canada, Ltd. tiger OBJECT IDENTIFIER ::= { ngcan 2 } -- Tiger (Network Access Device) sysMIB OBJECT IDENTIFIER ::= { tiger 18 } system OBJECT IDENTIFIER ::= { sysMIB 1 } interfaces OBJECT IDENTIFIER ::= { sysMIB 2 } ip OBJECT IDENTIFIER ::= { sysMIB 3 } icmp OBJECT IDENTIFIER ::= { sysMIB 4 } tcp OBJECT IDENTIFIER ::= { sysMIB 5 } udp OBJECT IDENTIFIER ::= { sysMIB 6 } snmp OBJECT IDENTIFIER ::= { sysMIB 7 } sysTraps OBJECT IDENTIFIER ::= { sysMIB 8 } partyMIB OBJECT IDENTIFIER ::= { sysMIB 9 } -- textual conventions -- -- !! NOTE !! -- -- When trying to compile this MIB under HP Openview or a derivative, -- you may find that it complains about the following two lines. -- You may safely comment these out by placing a two dashes in front of them. -- --Gauge32 ::= INTEGER (0..2147483647) --defaultOID OBJECT IDENTIFIER ::= { 0 0 } PhysAddress ::= OCTET STRING -- This data type is used to model media addresses. For many -- types of media, this will be in a binary representation. -- For example, an ethernet address would be represented as -- a string of 6 octets. -- the System group -- Implementation of the System group is current for all -- systems. If an agent is not configured to have a value -- for any of these variables, a string of length 0 is -- returned. sysDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "A textual description of the Tiger. This value corresponds to the description of the unit obtained from the configuration tool. This object should only contain printable ASCII characters." ::= { system 1 } sysObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. Tiger is identified by the subtree (1.3.6.1.4.1.1978.2.18.1.2.0)" ::= { system 2 } sysUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the system was last re-initialized." ::= { system 3 } sysContact OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The textual identification of the contact person for this managed node, together with information on how to contact this person. This will normally be filled in via the .cfg file as generated by the configuration tool." ::= { system 4 } sysName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this managed node as identified from the .cfg file that was filled in by the configuration tool. By convention, this is the node's fully-qualified domain name. This parameter is also used as the prompt for TELNET sessions to help identify the Tiger." ::= { system 5 } sysLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The physical location of this node as identified from the .cfg file that was filled in by the configuration tool. (e.g., `telephone closet, 3rd floor')." ::= { system 6 } sysServices OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted." ::= { system 7 } -- the Interfaces group -- Implementation of the Interfaces group is current for -- all systems. ifNumber OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-only STATUS mandatory DESCRIPTION "The number of network interfaces (regardless of their current state) present on this system." ::= { interfaces 1 } -- the Interfaces table -- The Interfaces table contains information on the entity's -- interfaces. Each interface is thought of as being -- attached to a `subnetwork'. Note that this term should -- not be confused with `subnet' which refers to an -- addressing partitioning scheme used in the Internet suite -- of protocols. ifTable OBJECT-TYPE SYNTAX SEQUENCE OF IfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface entries. The number of entries is given by the value of ifNumber." ::= { interfaces 2 } ifEntry OBJECT-TYPE SYNTAX IfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifIndex } ::= { ifTable 1 } IfEntry ::= SEQUENCE { ifIndex INTEGER, ifDescr DisplayString, ifType INTEGER, ifMtu INTEGER, ifSpeed Gauge32, ifPhysAddress PhysAddress, ifAdminStatus INTEGER, ifOperStatus INTEGER, ifLastChange TimeTicks, ifInOctets Counter, ifInUcastPkts Counter, ifInNUcastPkts Counter, ifInDiscards Counter, ifInErrors Counter, ifInUnknownProtos Counter, ifOutOctets Counter, ifOutUcastPkts Counter, ifOutNUcastPkts Counter, ifOutDiscards Counter, ifOutErrors Counter, ifOutQLen Gauge32, ifSpecific OBJECT IDENTIFIER, ifInMulticastPkts Counter, ifInBroadcastPkts Counter, ifOutMulticastPkts Counter, ifOutBroadcastPkts Counter, ifStateChangeTrapEnable INTEGER, ifConnectorPresent TruthValue, ifClearStats INTEGER, ifClearStatsTime TimeTicks, ifErrorRateTrapEnable INTEGER, ifErrorRateInterval INTEGER, ifErrorInLowThreshold INTEGER, ifErrorInHighThreshold INTEGER, ifErrorOutLowThreshold INTEGER, ifErrorOutHighThreshold INTEGER, ifErrType INTEGER } ifIndex OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { ifEntry 1 } ifDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface." ::= { ifEntry 2 } ifType OBJECT-TYPE SYNTAX INTEGER { other (1), -- none of the following regular1822 (2), hdh1822 (3), ddn-x25 (4), rfc877-x25 (5), ethernet-csmacd (6), iso88023-csmacd (7), iso88024-tokenBus (8), iso88025-tokenRing (9), iso88026-man (10), starLan (11), proteon-10Mbit (12), proteon-80Mbit (13), hyperchannel (14), fddi (15), lapb (16), sdlc (17), ds1 (18), -- T-1 e1 (19), -- european equiv. of T-1 basicISDN (20), primaryISDN (21), -- proprietary serial propPointToPointSerial (22), ppp (23), softwareLoopback (24), eon (25), -- CLNP over IP [11] ethernet-3Mbit (26), nsip (27), -- XNS over IP slip (28), -- generic SLIP ultra (29), -- ULTRA technologies ds3 (30), -- T-3 sip (31), -- SMDS frame-relay (32), rs232 (33), para (34), -- parallel-port arcnet (35), -- arcnet arcnetPlus (36), -- arcnet plus atm (37), -- ATM cells miox25 (38), sonet (39), -- SONET or SDH x25ple (40), iso88022llc (41), localTalk (42), smdsDxi (43), frameRelayService (44), -- Frame relay DCE v35 (45), hssi (46), hippi (47), modem (48), -- Generic modem aal5 (49), -- AAL5 over ATM sonetPath (50), sonetVT (51), smdsIcip (52), -- SMDS InterCarrier Interface propVirtual (53), -- proprietary virtual/internal propMultiplexor (54), -- proprietary multiplexing alc (55), -- the ALC protocol cap (56), -- Simple CAP application frip (57), -- Frame Relay to IP glue logic autif (58), -- ALC to TCP/UDP glue logic u100 (59), -- the U100 protocol console (60), -- TIGER console application x2x (61), -- X.25 to X.25 transparent application mux (62), -- Tiger internal multiplexors apath (63), -- Type A path module pad (64), -- X.25 PAD (IATA, QLLC, IP) dlswCircuit (65), -- DLSw (circuit side) dlswSession (66), -- DLSw (session side) matipUser (67), -- MATIP (user side) matipSession (68), -- MATIP (session side) pcNic (69) -- PCI Tiger to PC IP-DPM channel } ACCESS read-write STATUS mandatory DESCRIPTION "The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack." ::= { ifEntry 3 } ifMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { ifEntry 4 } ifSpeed OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth." ::= { ifEntry 5 } ifPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "This information is required for configuration only when BOOTP support is enabled in the TIGER configuration tool in order to properly create a bootptab record. The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. Although it is defined as a writable variable, TIGER may silently discard that information. If the physical address given does not match the actual address, an error message may be shown. For Ethernet interfaces on TIGER, the leading 3 bytes should be: 004003. For Token Ring Interfaces, the leading 3 bytes should be: 0000F6. If you enter only the last 3 bytes of the MAC address, the configuration tool will automatically add the leading 3 bytes." ::= { ifEntry 6 } ifAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), -- ready to pass packets down (2), testing (3) -- in some test mode } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The testing(3) state indicates that no operational packets can be passed." ::= { ifEntry 7 } ifOperStatus OBJECT-TYPE SYNTAX INTEGER { testing (1), up (2), down-L2 (3), down-modem (4), down-other (5), up-blocktx (6), up-preventrx (7), up-bothflow (8), cts-failure (9), dcd-failure (10), hardware-failure (11), up-isolated (12) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the interface. testing - indicates that no operational packets can be passed. up - normal operation down-L2 - down due to a level 2 failure dowm-modem - down due to modem control signals - (Token Ring - transmitting beacon frames or rx beaconing, signal loss) down-other - down for some other reason - (Token Ring - no status yet received, i.e. unknown status) up-blocktx - normal; but Tiger received a flow control signal preventing it from sending data up-preventrx - normal; but Tiger sent a flow control signal to stop the other end from sending data up-bothflow - normal; but Tiger received a flow control signal preventing it from sending data AND sent a flow control signal to stop the other end from sending data cts-failure - RTS was requested, but CTS never came (probably detected via poll timeout) dcd-failure - DCD dropped while receiving data, OR - unable to poll because other ends is still transmitting (polled protocols only). hardware-failure - missing FPGA (Token Ring: PCMCIA card missing) up-isolated - (Token Ring: Single station on the ring)" ::= { ifEntry 8 } ifLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { ifEntry 9 } ifInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { ifEntry 10 } ifInUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of subnetwork-unicast packets delivered to a higher-layer protocol." ::= { ifEntry 11 } ifInNUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol." ::= { ifEntry 12 } ifInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { ifEntry 13 } ifInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { ifEntry 14 } ifInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received via the interface which were discarded because of an unknown or unsupported protocol." ::= { ifEntry 15 } ifOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { ifEntry 16 } ifOutUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::= { ifEntry 17 } ifOutNUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::= { ifEntry 18 } ifOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::= { ifEntry 19 } ifOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { ifEntry 20 } ifOutQLen OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The length of the output packet queue (in packets)." ::= { ifEntry 21 } ifSpecific OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value." DEFVAL { defaultOID } ::= { ifEntry 22 } ifInMulticastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { ifEntry 23 } ifInBroadcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer." ::= { ifEntry 24 } ifOutMulticastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { ifEntry 25 } ifOutBroadcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent." ::= { ifEntry 26 } ifStateChangeTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether ifStateChange traps should be generated for this interface. By default, this object should have the value enabled for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled otherwise." DEFVAL { enabled } ::= { ifEntry 27 } ifConnectorPresent OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise." ::= { ifEntry 28 } ifClearStats OBJECT-TYPE SYNTAX INTEGER { clear (1), cleared (2), cleared-confirmed (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to 'clear' all of the interface statistics are cleared to zero. It will also force a clearing of all protocol, and 'user' statistics that are related to this interface. Normally, this object will be adjusted if it is associated with physical ports (i.e. 1 - 8) When read, this object should always return 'cleared' indicating that the clear operation took place. Should the operation be defered, the value will remain as 'clear' until such time as: 1/ all of the statistics have actually been zeroed, and 2/ ifClearStatsTime has been updated with the correct time. Should an NMS read the object and receive a 'cleared' indication, the SNMP agent will set this object to 'cleared-confirmed'. This aids the NMS in determining whether or not the agent successfully received subsequent clear request. Normal operation would be: NMS Agent set 'clear' --> set to 'clear,' perform clearing . read --> . 'clear' <-- . clearing complete, set to 'cleared' . read --> . 'cleared' <-- set to 'cleared-confirmed' . read --> . 'cleared-confirmed' <-- . Rules: 1/ NMS must read 'cleared-confirmed' BEFORE attempting to set 'clear'. 2/ After setting 'clear' the NMS must read 'cleared'. then the NMS must read 'cleared-confirmed'. In this manner, if a 'clear' command was missed by the agent, the variable will still be set to either 'cleared' or 'cleared-confirmed'." DEFVAL { cleared } ::= { ifEntry 29 } ifClearStatsTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The number of ticks when the Tiger last received a ifClearStats command." ::= { ifEntry 30 } ifErrorRateTrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether ifErrorRate traps should be generated for this interface. In addition to enabling the trap via this object, thresholds must also be set." DEFVAL { enabled } ::= { ifEntry 31 } ifErrorRateInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The amount of time over which any error rate is calculated." DEFVAL { 10 } ::= { ifEntry 32 } ifErrorInLowThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If the number of input errors drops below the low water mark (threshold) over the interval defined by 'ifErrorRateInterval' then a trap may be generated if enabled by 'ifErrorRateTrapEnable'. What errors constitute as input errors is dependant on the interface being monitored." DEFVAL { 0 } ::= { ifEntry 33 } ifErrorInHighThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If the Low water mark (threshold) has been reached, this defines the other end of the hysterisis curve, when more than 'ifErrorInHighThreshold' number of errors have occured over the measurement interval of 'ifErrorRateInterval' If this value is reached, then a trap may be generated if enabled by 'ifErrorRateTrapEnable'. ifErrorInLowThreshold <= ifErrorInHighThreshold What errors constitute as input errors is dependant on the interface being monitored." DEFVAL { 20 } ::= { ifEntry 34 } ifErrorOutLowThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If the number of output errors drops below the low water mark (threshold) over the interval defined by 'ifErrorRateInterval' then a trap may be generated if enabled by 'ifErrorRateTrapEnable'. ifErrorOutLowThreshold <= ifErrorOutHighThreshold What errors constitute as output errors is dependant on the interface being monitored." DEFVAL { 0 } ::= { ifEntry 35 } ifErrorOutHighThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "If the Low water mark (threshold) has been reached, this defines the other end of the hysterisis curve, when more than 'ifErrorOutHighThreshold' number of errors have occured over the measurement interval of 'ifErrorRateInterval' If this value is reached, then a trap may be generated if enabled by 'ifErrorRateTrapEnable'. ifErrorOutLowThreshold <= ifErrorOutHighThreshold What errors constitute as output errors is dependant on the interface being monitored." DEFVAL { 20 } ::= { ifEntry 36 } ifErrType OBJECT-TYPE SYNTAX INTEGER { in-alarm (1), in-recovery (2), out-alarm (3), out-recovery (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Informs the NMS of the reason for the ifErrorRate trap that was received. When read asynchronously, it also indicates the last known state of this interface entry." ::= { ifEntry 37 } -- the IP group -- Implementation of the IP group is current for all -- systems. ipForwarding OBJECT-TYPE SYNTAX INTEGER { forwarding (1), -- acting as a gateway not-forwarding (2) -- NOT acting as a gateway } ACCESS read-write STATUS mandatory DESCRIPTION "The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value." ::= { ip 1 } ipDefaultTTL OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol." ::= { ip 2 } ipInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error." ::= { ip 3 } ipInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc." ::= { ip 4 } ipInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address." ::= { ip 5 } ipForwDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful." ::= { ip 6 } ipInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol." ::= { ip 7 } ipInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly." ::= { ip 8 } ipInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams successfully delivered to IP user-protocols (including ICMP)." ::= { ip 9 } ipOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams." ::= { ip 10 } ipOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion." ::= { ip 11 } ipOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down." ::= { ip 12 } ipReasmTimeout OBJECT-TYPE SYNTAX INTEGER (0..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity." ::= { ip 13 } ipReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP fragments received which needed to be reassembled at this entity." ::= { ip 14 } ipReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams successfully re-assembled." ::= { ip 15 } ipReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received." ::= { ip 16 } ipFragOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been successfully fragmented at this entity." ::= { ip 17 } ipFragFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set." ::= { ip 18 } ipFragCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagram fragments that have been generated as a result of fragmentation at this entity." ::= { ip 19 } -- the IP address table -- The IP address table contains this entity's IP addressing -- information. ipAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of addressing information relevant to this entity's IP addresses." ::= { ip 20 } ipAddrEntry OBJECT-TYPE SYNTAX IpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The addressing information for one of this entity's IP addresses." INDEX { ipAdEntAddr } ::= { ipAddrTable 1 } IpAddrEntry ::= SEQUENCE { ipAdEntAddr IpAddress, ipAdEntIfIndex INTEGER, ipAdEntNetMask IpAddress, ipAdEntBcastAddr INTEGER, ipAdEntReasmMaxSize INTEGER } ipAdEntAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address to which this entry's addressing information pertains. If this is a PPP port, an IP address of 0.0.0.0 signifies that IP address negotiation will occur on this link. If negotiation is enabled, the net mask will be forced to a correct value that is appropriate for that class of address." ::= { ipAddrEntry 1 } ipAdEntIfIndex OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { ipAddrEntry 2 } ipAdEntNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { ipAddrEntry 3 } ipAdEntBcastAddr OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface." ::= { ipAddrEntry 4 } ipAdEntReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { ipAddrEntry 5 } -- the IP Address Translation table -- The IP address translation table contain the IpAddress to -- `physical' address equivalences. Some interfaces do not -- use translation tables for determining address -- equivalences (e.g., DDN-X.25 has an algorithmic method); -- if all interfaces are of this type, then the Address -- Translation table is empty, i.e., has zero entries. ipNetToMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IP Address Translation table used for mapping from IP addresses to physical addresses." ::= { ip 22 } ipNetToMediaEntry OBJECT-TYPE SYNTAX IpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains one IpAddress to `physical' address equivalence." INDEX { ipNetToMediaIfIndex, ipNetToMediaNetAddress } ::= { ipNetToMediaTable 1 } IpNetToMediaEntry ::= SEQUENCE { ipNetToMediaIfIndex INTEGER, ipNetToMediaPhysAddress PhysAddress, ipNetToMediaNetAddress IpAddress, ipNetToMediaType INTEGER } ipNetToMediaIfIndex OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { ipNetToMediaEntry 1 } ipNetToMediaPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The media-dependent `physical' address." ::= { ipNetToMediaEntry 2 } ipNetToMediaNetAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IpAddress corresponding to the media-dependent `physical' address." ::= { ipNetToMediaEntry 3 } ipNetToMediaType OBJECT-TYPE SYNTAX INTEGER { other (1), -- none of the following invalid (2), -- an invalidated mapping dynamic (3), static (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object." ::= { ipNetToMediaEntry 4 } -- additional IP objects ipRoutingDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries." ::= { ip 23 } ipClearStats OBJECT-TYPE SYNTAX INTEGER { clear (1), cleared (2), cleared-confirmed (3) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to 'clear' all of the ip/icmp/tcp/udp/ppp/snmp statistics are cleared to zero. When read, this object should always return 'cleared' indicating that the clear operation took place. Should the operation be defered, the value will remain as 'clear' until such time as: 1/ all of the statistics have actually been zeroed, and 2/ ipClearStatsTime has been updated with the correct time. Should an NMS read the object and receive a 'cleared' indication, the SNMP agent will set this object to 'cleared-confirmed'. This aids the NMS in determining whether or not the agent successfully received subsequent clear request. Normal operation would be: NMS Agent set 'clear' --> set to 'clear,' perform clearing . read --> . 'clear' <-- . clearing complete, set to 'cleared' . read --> . 'cleared' <-- set to 'cleared-confirmed' . read --> . 'cleared-confirmed' <-- . Rules: 1/ NMS must read 'cleared-confirmed' BEFORE attempting to set 'clear'. 2/ After setting 'clear' the NMS must read 'cleared'. then the NMS must read 'cleared-confirmed'. In this manner, if a 'clear' command was missed by the agent, the variable will still be set to either 'cleared' or 'cleared-confirmed'." DEFVAL { cleared } ::= { ip 24 } ipClearStatsTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The number of ticks when the Tiger last received a ipClearStats command." ::= { ip 25 } ipForward OBJECT IDENTIFIER ::= { ip 26 } ipForwardNumber OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of current ipForwardTable entries that are not invalid." ::= { ipForward 1 } -- IP Forwarding Table -- The IP Forwarding Table obsoletes and replaces the ipRoute -- Table current in MIB-I and MIB-II. It adds knowledge of -- the autonomous system of the next hop, multiple next hop -- support, and policy routing support. ipForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF IpForwardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entity's IP Routing table." REFERENCE "RFC 1213 Section 6.6, The IP Group" ::= { ipForward 2 } ipForwardEntry OBJECT-TYPE SYNTAX IpForwardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A particular route to a particular destination, under a particular policy." INDEX { ipForwardDest, -- ipForwardProto, -- ipForwardPolicy, ipForwardNextHop } ::= { ipForwardTable 1 } IpForwardEntry ::= SEQUENCE { ipForwardDest IpAddress, ipForwardMask IpAddress, -- ipForwardPolicy INTEGER, ipForwardNextHop IpAddress, ipForwardIfIndex INTEGER, -- ipForwardType INTEGER, -- ipForwardProto INTEGER, -- ipForwardAge INTEGER, -- ipForwardInfo OBJECT IDENTIFIER, -- ipForwardNextHopAS INTEGER, ipForwardMetric1 INTEGER, ipForwardMetric2 INTEGER, ipForwardMetric3 INTEGER, ipForwardMetric4 INTEGER, ipForwardMetric5 INTEGER } ipForwardDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipForwardMask object is not equal to x." ::= { ipForwardEntry 1 } ipForwardMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipForwardDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipForwardMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipForwardDest object is not equal to ipForwardDest." DEFVAL { '00000000'h } -- 0.0.0.0 ::= { ipForwardEntry 2 } -- The following convention is included for specification -- of TOS Field contents. At this time, the Host Requirements -- and the Router Requirements documents disagree on the width -- of the TOS field. This mapping describes the Router -- Requirements mapping, and leaves room to widen the TOS field -- without impact to fielded systems. -- ipForwardPolicy OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The general set of conditions that would cause the selection of -- one multipath route (set of next hops for a given destination) -- is referred to as 'policy'. -- -- Unless the mechanism indicated by ipForwardProto specifies -- otherwise, the policy specifier is the IP TOS Field. The -- encoding of IP TOS is as specified by the following convention. -- Zero indicates the default path if no more specific policy applies. -- -- +-----+-----+-----+-----+-----+-----+-----+-----+ -- | | | | -- | PRECEDENCE | TYPE OF SERVICE | 0 | -- | | | | -- +-----+-----+-----+-----+-----+-----+-----+-----+ -- -- IP TOS IP TOS -- Field Policy Field Policy -- Contents Code Contents Code -- 0 0 0 0 ==> 0 0 0 0 1 ==> 2 -- 0 0 1 0 ==> 4 0 0 1 1 ==> 6 -- 0 1 0 0 ==> 8 0 1 0 1 ==> 10 -- 0 1 1 0 ==> 12 0 1 1 1 ==> 14 -- 1 0 0 0 ==> 16 1 0 0 1 ==> 18 -- 1 0 1 0 ==> 20 1 0 1 1 ==> 22 -- 1 1 0 0 ==> 24 1 1 0 1 ==> 26 -- 1 1 1 0 ==> 28 1 1 1 1 ==> 30 -- -- Protocols defining 'policy' otherwise must either define a set of -- values which are valid for this object or must implement an integer- -- instanced policy table for which this object's value acts as an index." -- ::= { ipForwardEntry 3 } -- ipForwardNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "On remote routes, the address of the next system en route; Otherwise, 0.0.0.0." ::= { ipForwardEntry 4 } ipForwardIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex value which identifies the local interface through which the next hop of this route should be reached." DEFVAL { 0 } ::= { ipForwardEntry 5 } -- ipForwardType OBJECT-TYPE -- SYNTAX INTEGER { -- other (1), ;; not specified by this MIB -- invalid (2), ;; logically deleted -- local (3), ;; local interface -- remote (4) ;; remote destination -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The type of route. Note that local(3) refers to a route -- for which the next hop is the final destination; remote(4) -- refers to a route for which the next hop is not the final -- destination. -- -- Setting this object to the value invalid(2) has the effect -- of invalidating the corresponding entry in the ipForwardTable -- object. That is, it effectively disassociates the destination -- identified with said entry from the route identified with said -- entry. It is an implementation-specific matter as to whether -- the agent removes an invalidated entry from the table. -- Accordingly, management stations must be prepared to receive -- tabular information from agents that corresponds to entries -- not currently in use. Proper interpretation of such entries -- requires examination of the relevant ipForwardType object." -- DEFVAL { invalid } -- ::= { ipForwardEntry 6 } -- -- ipForwardProto OBJECT-TYPE -- SYNTAX INTEGER { -- other (1), ;; not specified -- local (2), ;; local interface -- netmgmt (3), ;; static route -- icmp (4), ;; result of ICMP Redirect -- -- ;; the following are all dynamic routing protocols -- -- egp (5), ;; Exterior Gateway Protocol -- ggp (6), ;; Gateway-Gateway Protocol -- hello (7), ;; FuzzBall HelloSpeak -- rip (8), ;; Berkeley RIP or RIP-II -- is-is (9), ;; Dual IS-IS -- es-is (10), ;; ISO 9542 -- ciscoIgrp (11), ;; Cisco IGRP -- bbnSpfIgp (12), ;; BBN SPF IGP -- ospf (13), ;; Open Shortest Path First -- bgp (14), ;; Border Gateway Protocol -- idpr (15) ;; InterDomain Policy Routing -- } -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The routing mechanism via which this route was learned. -- Inclusion of values for gateway routing protocols is not -- intended to imply that hosts should support those protocols." -- ::= { ipForwardEntry 7 } -- -- ipForwardAge OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "The number of seconds since this route was last updated or -- otherwise determined to be correct. Note that no semantics -- of `too old' can be implied except through knowledge of the -- routing protocol by which the route was learned." -- DEFVAL { 0 } -- ::= { ipForwardEntry 8 } -- -- ipForwardInfo OBJECT-TYPE -- SYNTAX OBJECT IDENTIFIER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "A reference to MIB definitions specific to the particular routing -- protocol which is responsible for this route, as determined by the -- value specified in the route's ipForwardProto value. If this -- information is not present, its value should be set to the OBJECT -- IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, -- and any implementation conforming to ASN.1 and the Basic Encoding -- Rules must be able to generate and recognize this value." -- DEFVAL { { 0 0 } } ;; 0.0 -- ::= { ipForwardEntry 9 } -- -- ipForwardNextHopAS OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The Autonomous System Number of the Next Hop. When this is unknown -- or not relevant to the protocol indicated by ipForwardProto, zero." -- DEFVAL { 0 } -- ::= { ipForwardEntry 10 } ipForwardMetric1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. For static routing tables, Metric1 is the default 'cost' (1-15) of the route when it is in the up condition. This is compared to other possible routes for the same destination, to state the preferred path. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 11 } ipForwardMetric2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. For static routing tables, Metric1 is the default 'cost' (1-15) of the route when it is in the up condition. This is compared to other possible routes for the same destination, to state the preferred path. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 12 } ipForwardMetric3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. For static routing tables, Metric1 is the default 'cost' (1-15) of the route when it is in the up condition. This is compared to other possible routes for the same destination, to state the preferred path. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 13 } ipForwardMetric4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. For static routing tables, Metric1 is the default 'cost' (1-15) of the route when it is in the up condition. This is compared to other possible routes for the same destination, to state the preferred path. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 14 } ipForwardMetric5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipForwardProto value. For static routing tables, Metric1 is the default 'cost' (1-15) of the route when it is in the up condition. This is compared to other possible routes for the same destination, to state the preferred path. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { ipForwardEntry 15 } ipForwardTrapControl OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "If enabled, it allows the system to generate ipForward traps, when the routing table changes." DEFVAL { enabled } ::= { ipForward 3 } ipForwardTrapReason OBJECT-TYPE SYNTAX INTEGER { none (1), add (2), delete (3), modify (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The reason that the ipRouteChange trap was generated. add - the entry was added. delete - the entry was removed. modified - the entry was modified. The metric probably changed value due to a link going up or down)." DEFVAL { none } ::= { ipForward 4 } -- the ICMP group -- Implementation of the ICMP group is current for all -- systems. icmpInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors." ::= { icmp 1 } icmpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { icmp 2 } icmpInDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages received." ::= { icmp 3 } icmpInTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages received." ::= { icmp 4 } icmpInParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages received." ::= { icmp 5 } icmpInSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages received." ::= { icmp 6 } icmpInRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages received." ::= { icmp 7 } icmpInEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages received." ::= { icmp 8 } icmpInEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages received." ::= { icmp 9 } icmpInTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages received." ::= { icmp 10 } icmpInTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages received." ::= { icmp 11 } icmpInAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages received." ::= { icmp 12 } icmpInAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages received." ::= { icmp 13 } icmpOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { icmp 14 } icmpOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { icmp 15 } icmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages sent." ::= { icmp 16 } icmpOutTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages sent." ::= { icmp 17 } icmpOutParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages sent." ::= { icmp 18 } icmpOutSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages sent." ::= { icmp 19 } icmpOutRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects." ::= { icmp 20 } icmpOutEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages sent." ::= { icmp 21 } icmpOutEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages sent." ::= { icmp 22 } icmpOutTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages sent." ::= { icmp 23 } icmpOutTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages sent." ::= { icmp 24 } icmpOutAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages sent." ::= { icmp 25 } icmpOutAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { icmp 26 } -- the TCP group -- Implementation of the TCP group is current for all -- systems that implement the TCP. -- Note that instances of object types that represent -- information about a particular TCP connection are -- transient; they persist only as long as the connection -- in question. tcpRtoAlgorithm OBJECT-TYPE SYNTAX INTEGER { other (1), -- none of the following constant (2), -- a constant rto rsre (3), -- MIL-STD-1778, Appendix B vanj (4) -- Van Jacobson's algorithm [10] } ACCESS read-only STATUS mandatory DESCRIPTION "The algorithm used to determine the timeout value used for retransmitting unacknowledged octets." ::= { tcp 1 } tcpRtoMin OBJECT-TYPE SYNTAX INTEGER (0..360000) ACCESS read-only STATUS mandatory DESCRIPTION "The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793. UNITS: milliseconds" ::= { tcp 2 } tcpRtoMax OBJECT-TYPE SYNTAX INTEGER (0..360000) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793. UNITS: milliseconds" ::= { tcp 3 } tcpMaxConn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1." ::= { tcp 4 } tcpActiveOpens OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state." ::= { tcp 5 } tcpPassiveOpens OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state." ::= { tcp 6 } tcpAttemptFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state." ::= { tcp 7 } tcpEstabResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state." ::= { tcp 8 } tcpCurrEstab OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT." ::= { tcp 9 } tcpInSegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of segments received, including those received in error. This count includes segments received on currently established connections." ::= { tcp 10 } tcpOutSegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets." ::= { tcp 11 } tcpRetransSegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets." ::= { tcp 12 } -- the TCP Connection table -- The TCP connection table contains information about this -- entity's existing TCP connections. tcpConnTable OBJECT-TYPE SYNTAX SEQUENCE OF TcpConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing TCP connection-specific information." ::= { tcp 13 } tcpConnEntry OBJECT-TYPE SYNTAX TcpConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state." INDEX { tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, tcpConnRemPort } ::= { tcpConnTable 1 } TcpConnEntry ::= SEQUENCE { tcpConnState INTEGER, tcpConnLocalAddress IpAddress, tcpConnLocalPort INTEGER, tcpConnRemAddress IpAddress, tcpConnRemPort INTEGER } tcpConnState OBJECT-TYPE SYNTAX INTEGER { closed (1), listen (2), synSent (3), synReceived (4), established (5), finWait1 (6), finWait2 (7), closeWait (8), lastAck (9), closing (10), timeWait (11), deleteTCB (12) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this TCP connection. NOTE: The following paragraphs are from rfc1213 and Tiger does not currently support this. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably)." ::= { tcpConnEntry 1 } tcpConnLocalAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used." ::= { tcpConnEntry 2 } tcpConnLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this TCP connection." ::= { tcpConnEntry 3 } tcpConnRemAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote IP address for this TCP connection." ::= { tcpConnEntry 4 } tcpConnRemPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The remote port number for this TCP connection." ::= { tcpConnEntry 5 } -- additional TCP objects tcpInErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of segments received in error (e.g., bad TCP checksums)." ::= { tcp 14 } tcpOutRsts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP segments sent containing the RST flag." ::= { tcp 15 } tcpRetransAttempts OBJECT-TYPE SYNTAX INTEGER (0..600) ACCESS read-write STATUS mandatory DESCRIPTION "The number of TCP retransmision attempts before the socket connection is declared down. The interval between attempts is fixed at approximately 7 seconds. This parameter is global for all TCP applications. (default=6)" ::= { tcp 16 } tcpKAInterval OBJECT-TYPE SYNTAX INTEGER (1..600) ACCESS read-write STATUS mandatory DESCRIPTION "The interval of time, expressed in seconds between keepalive packets. Keepalive packets are generated when there is no other socket traffic. Although the operation of keepalive is defined on a per socket basis (see autif.mib), this parameter is global for all TCP applications. (default=30)" ::= { tcp 17 } tcpKAAttempts OBJECT-TYPE SYNTAX INTEGER (0..600) ACCESS read-write STATUS mandatory DESCRIPTION "The number of successive TCP keepalive packets sent with no reply at tcpKAIntervals before the socket connection is declared down. Although the operation of keepalive is defined on a per socket basis (see autif.mib), this parameter is global for all TCP applications. (default=3)" ::= { tcp 18 } -- the UDP group -- Implementation of the UDP group is current for all -- systems which implement the UDP. udpInDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP datagrams delivered to UDP users." ::= { udp 1 } udpNoPorts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received UDP datagrams for which there was no application at the destination port." ::= { udp 2 } udpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port." ::= { udp 3 } udpOutDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP datagrams sent from this entity." ::= { udp 4 } -- the UDP Listener table -- The UDP listener table contains information about this -- entity's UDP end-points on which a local application is -- currently accepting datagrams. udpTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing UDP listener information." ::= { udp 5 } udpEntry OBJECT-TYPE SYNTAX UdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current UDP listener." INDEX { udpLocalAddress, udpLocalPort } ::= { udpTable 1 } UdpEntry ::= SEQUENCE { udpLocalAddress IpAddress, udpLocalPort INTEGER } udpLocalAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used." ::= { udpEntry 1 } udpLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this UDP listener." ::= { udpEntry 2 } -- the SNMP group -- Implementation of the SNMP group is current for all -- systems which support an SNMP protocol entity. Some of -- the objects defined below will be zero-valued in those -- SNMP implementations that are optimized to support only -- those functions specific to either a management agent or -- a management station. In particular, it should be -- observed that the objects below refer to an SNMP entity, -- and there may be several SNMP entities residing on a -- managed node (e.g., if the node is hosting acting as -- a management station). snmpInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of Messages delivered to the SNMP entity from the transport service." ::= { snmp 1 } snmpOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service." ::= { snmp 2 } snmpInBadVersions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version." ::= { snmp 3 } snmpInBadCommunityNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity." ::= { snmp 4 } snmpInBadCommunityUses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message." ::= { snmp 5 } snmpInASNParseErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages." ::= { snmp 6 } -- { snmp 7 } is not used snmpInTooBigs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'." ::= { snmp 8 } snmpInNoSuchNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'." ::= { snmp 9 } snmpInBadValues OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'." ::= { snmp 10 } snmpInReadOnlys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP." ::= { snmp 11 } snmpInGenErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'." ::= { snmp 12 } snmpInTotalReqVars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs." ::= { snmp 13 } snmpInTotalSetVars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs." ::= { snmp 14 } snmpInGetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 15 } snmpInGetNexts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 16 } snmpInSetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 17 } snmpInGetResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 18 } snmpInTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 19 } snmpOutTooBigs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'" ::= { snmp 20 } snmpOutNoSuchNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'." ::= { snmp 21 } snmpOutBadValues OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'." ::= { snmp 22 } -- { snmp 23 } is not used snmpOutGenErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'." ::= { snmp 24 } snmpOutGetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity." ::= { snmp 25 } snmpOutGetNexts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity." ::= { snmp 26 } snmpOutSetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity." ::= { snmp 27 } snmpOutGetResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity." ::= { snmp 28 } snmpOutTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity." ::= { snmp 29 } snmpEnableAuthenTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system." ::= { snmp 30 } -- Note that full access to the partyTable, contextTable, -- aclTable, and viewTable gives a manager the ability to -- configure any parties with any/all capabilities (the -- equivalent of "root" access). A lesser manager can be -- given access only to the partyTable so that it can -- maintain its own parties, but not increase/decrease -- their capabilities. Such a lesser manager can also -- create new parties but they are of no use to it. partyCommTable OBJECT-TYPE SYNTAX SEQUENCE OF PartyCommEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SNMP community database." ::= { partyMIB 1 } partyCommEntry OBJECT-TYPE SYNTAX PartyCommEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Locally held information about a particular SNMP community." INDEX { partyCommIndex } ::= { partyCommTable 1 } PartyCommEntry ::= SEQUENCE { partyCommIndex INTEGER, partyCommunity DisplayString, partyAccess INTEGER } partyCommIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "A unique value for each SNMPv2 party. The value for each SNMPv2 party must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { partyCommEntry 1 } partyCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The SNMP community associated with this entry." ::= { partyCommEntry 2 } partyAccess OBJECT-TYPE SYNTAX INTEGER { read-only (1), write-only (2), read-write (3), no-access (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the access rights of this community." DEFVAL { read-write } ::= { partyCommEntry 3 } -- partyTrapTable OBJECT-TYPE SYNTAX SEQUENCE OF PartyTrapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SNMP trap destination database." ::= { partyMIB 2 } partyTrapEntry OBJECT-TYPE SYNTAX PartyTrapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Locally held information about a particular SNMP trap destination." INDEX { partyTrapIndex } ::= { partyTrapTable 1 } PartyTrapEntry ::= SEQUENCE { partyTrapIndex INTEGER, partyTAddress IpAddress, partyTPort INTEGER, partyTDomain INTEGER, partyTCommunity DisplayString } partyTrapIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "A unique value for each SNMP trap destination entry." ::= { partyTrapEntry 1 } partyTAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address by which the party receives network management traffic." ::= { partyTrapEntry 2 } partyTPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port address by which the party receives network management traffic." ::= { partyTrapEntry 3 } partyTDomain OBJECT-TYPE SYNTAX INTEGER { udp (1), tcp (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the kind of transport service by which the party receives network management traffic." DEFVAL { udp } ::= { partyTrapEntry 4 } partyTCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The SNMP community used in the trap response to this entries address." ::= { partyTrapEntry 5 } -- -- Traps -- -- This section defines the well-known notifications sent by Tiger agents. -- These are sent when the corresponding threshold is exceeded ifStateChange TRAP-TYPE ENTERPRISE sysTraps VARIABLES { ifIndex, ifType, ifOperStatus, rs232PortIndex } DESCRIPTION "A linkStateChange trap signifies that the sending protocol entity recognizes a change in one of the communication links represented in the agent's configuration. Currently this trap is only applicable to: lapb frame_relay sdlc token ring u100 ethernet alc ppp Other interfaces that may be supported in the future are: apath pad x2x cap mux frip autif" ::= 1 ifErrorRate TRAP-TYPE ENTERPRISE sysTraps VARIABLES { ifIndex, ifType, ifErrType, rs232PortIndex } DESCRIPTION "A linkErrorRate trap signifies that the sending protocol entity discovered an error rate that in one of the communication links represented in the agent's configuration. Currently this trap is only applicable to: lapb frame_relay sdlc token ring u100 ethernet alc ppp Other interfaces that may be supported in the future are: apath pad x2x cap mux frip autif" ::= 2 ipRouteChange TRAP-TYPE ENTERPRISE sysTraps VARIABLES { ipForwardDest, ipForwardNextHop, ipForwardMetric1, ipForwardTrapReason } DESCRIPTION "An ipRouteChange trap signifies that the IP Forwarding table has been changed. An entry was added, deleted or modified." ::= 3 END