-- -- SYMMOUTGEN.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Monday, July 18, 2011 at 12:48:39 -- -- SYMMOUTGEN.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Tuesday, June 21, 2011 at 08:56:52 -- SYMMOUTGEN DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex FROM ENTITY-MIB ifNumber, ifIndex FROM IF-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC symmPhysicalSignal FROM SYMM-COMMON-SMI; -- 1.3.6.1.4.1.9070.1.2.5.2.6 -- -- 1.3.6.1.4.1.9070.1.2.5.2.6 symmOutGen MODULE-IDENTITY LAST-UPDATED "201107181121Z" -- July 18, 2011 at 11:21 GMT ORGANIZATION "Symmetricom" CONTACT-INFO "Symmetricom Technical Support 1-888-367-7966 toll free USA 1-408-428-7907 worldwide Support@symmetricom.com " DESCRIPTION "This is the Symmetricom Common MIB for output generation. It specifies output port behavior (on | squelch | AIS) when the system clock state is not Normal Tracking. TP5K defines five clock states: warm-up, free-run, fast track, normal track, and holdover. " REVISION "201107181121Z" -- July 18, 2011 at 11:21 GMT DESCRIPTION "New" ::= { symmPhysicalSignal 6 } -- -- Type definitions -- -- Type definitions -- GENERALOUTGENTYPE ::= INTEGER { squelch(1), on(2), ais(3) } -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- DateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" STATUS current DESCRIPTION "A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present." SYNTAX OCTET STRING (SIZE (8 | 11)) TLatAndLon ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d:1d.1d" STATUS current DESCRIPTION "antenna latitude and longitude specification. field octets contents range ----- ------ -------- ----- 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss " SYNTAX OCTET STRING (SIZE (5)) TAntHeight ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a2d.1d" STATUS current DESCRIPTION "antenna height specification. field octets contents range ----- ------ -------- ----- 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh " SYNTAX OCTET STRING (SIZE (4)) TLocalTimeOffset ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d" STATUS current DESCRIPTION "A local time offset specification. field octets contents range ----- ------ -------- ----- 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours range is 0..13 For example, the -6 local time offset would be displayed as: -6:0 " SYNTAX OCTET STRING (SIZE (3)) TSsm ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "The ssm hex code" SYNTAX INTEGER (0..255) -- -- Node definitions -- -- Node definitions -- -- Output generation status sub-tree -- 1.3.6.1.4.1.9070.1.2.5.2.6.1 -- 1.3.6.1.4.1.9070.1.2.5.2.6.1 outGenStatus OBJECT IDENTIFIER ::= { symmOutGen 1 } -- Output generation configuration sub-tree -- 1.3.6.1.4.1.9070.1.2.5.2.6.2 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2 outGenConfig OBJECT IDENTIFIER ::= { symmOutGen 2 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1 outGenConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OutGenConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Output generation configuration table. Each table entry specifies port behavior for each of the four clock states. Only ports with the following physical signals are affected by this output generation table: E1/T1, 1PPS+TOD, 1PPS, and 10 MHz. Ethernet port signals (PTP, NTP, SyncE) use quality level parameters to indicate usability." ::= { outGenConfig 1 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1 outGenConfigEntry OBJECT-TYPE SYNTAX OutGenConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the output generation configuration table. Table index is ifIndex." INDEX { ifIndex, outGenConfigIndex } ::= { outGenConfigTable 1 } OutGenConfigEntry ::= SEQUENCE { outGenConfigIndex Integer32, outGenConfigWarmup GENERALOUTGENTYPE, outGenConfigFreerun GENERALOUTGENTYPE, outGenConfigHoldover GENERALOUTGENTYPE, outGenConfigFasttrack GENERALOUTGENTYPE } -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.1 outGenConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the output generation configuration table." ::= { outGenConfigEntry 1 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.6.3.1.3 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.3 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.3 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.2 outGenConfigWarmup OBJECT-TYPE SYNTAX GENERALOUTGENTYPE MAX-ACCESS read-write STATUS current DESCRIPTION "Output behavior during clock warm-up state for the specified port. Values can be on (1), squelch (2), or AIS (3)." ::= { outGenConfigEntry 2 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.4 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.4 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.3 outGenConfigFreerun OBJECT-TYPE SYNTAX GENERALOUTGENTYPE MAX-ACCESS read-write STATUS current DESCRIPTION "Output behavior during clock free-run state for the specified port. Values can be on (1), squelch (2), or AIS (3)." ::= { outGenConfigEntry 3 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.9 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.5 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.5 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.4 outGenConfigHoldover OBJECT-TYPE SYNTAX GENERALOUTGENTYPE MAX-ACCESS read-write STATUS current DESCRIPTION "Output behavior during clock holdover state for the specified port. Values can be on (1), squelch (2), or AIS (3)." ::= { outGenConfigEntry 4 } -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.9 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.5 -- 1.3.6.1.4.1.9070.1.2.4.6.3.5.3.1.5 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.5 outGenConfigFasttrack OBJECT-TYPE SYNTAX GENERALOUTGENTYPE MAX-ACCESS read-write STATUS current DESCRIPTION "Output behavior during clock fast-track state for the specified port. Values can be on (1), squelch (2), or AIS (3)." ::= { outGenConfigEntry 5 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.2.6.3 -- 1.3.6.1.4.1.9070.1.2.5.2.6.3 outGenConformance OBJECT-IDENTITY STATUS current DESCRIPTION "This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. " ::= { symmOutGen 3 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6.1 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.1 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.1 -- 1.3.6.1.4.1.9070.1.2.5.2.6.3.1 -- 1.3.6.1.4.1.9070.1.2.5.2.6.3.1 outGenCompliances OBJECT IDENTIFIER ::= { outGenConformance 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.6.3.1.1 -- this module -- 1.3.6.1.4.1.9070.1.2.5.2.6.3.1.1 outGenBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which have output generation." MODULE -- this module MANDATORY-GROUPS { outGenGroup } ::= { outGenCompliances 1 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6.2 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.2 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.2 -- 1.3.6.1.4.1.9070.1.2.5.2.6.3.2 -- 1.3.6.1.4.1.9070.1.2.5.2.6.3.2 outGenUocGroups OBJECT IDENTIFIER ::= { outGenConformance 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.6.3.2.1 -- 1.3.6.1.4.1.9070.1.2.5.2.6.3.2.1 outGenGroup OBJECT-GROUP OBJECTS { outGenConfigWarmup, outGenConfigFreerun, outGenConfigHoldover, outGenConfigFasttrack } STATUS current DESCRIPTION "A collection of objects providing information applicable to common output generation group." ::= { outGenUocGroups 1 } END -- -- SYMMOUTGEN.my --