-- -- SYMMNTP.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Monday, July 18, 2011 at 11:25:27 -- -- SYMMNTP.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Tuesday, May 24, 2011 at 13:15:12 -- SYMMNTP DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex FROM ENTITY-MIB ifNumber, ifIndex FROM IF-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC symmPacketService, EnableValue FROM SYMM-COMMON-SMI; -- 1.3.6.1.4.1.9070.1.2.4.8 -- November 01, 2010 at 00:00 GMT -- 1.3.6.1.4.1.9070.1.2.4.6.1 -- November 01, 2010 at 00:00 GMT -- 1.3.6.1.4.1.9070.1.2.4.6.1 -- November 01, 2010 at 00:00 GMT -- 1.3.6.1.4.1.9070.1.2.5.1.2 -- February 01, 2011 at 00:00 GMT -- 1.3.6.1.4.1.9070.1.2.5.1.2 symmNTP MODULE-IDENTITY LAST-UPDATED "201512111510Z" -- December 11, 2015 at 15:10 GMT ORGANIZATION "Symmetricom" CONTACT-INFO "Symmetricom Technical Support 1-888-367-7966 toll free USA 1-408-428-7907 worldwide Support@symmetricom.com " DESCRIPTION "This is the Symmetricom NTP MIB. It has two main nodes: NTP status and NTP configuration." ::= { symmPacketService 2 } -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- DateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" STATUS current DESCRIPTION "A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present." SYNTAX OCTET STRING (SIZE (8 | 11)) TLatAndLon ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d:1d.1d" STATUS current DESCRIPTION "antenna latitude and longitude specification. field octets contents range ----- ------ -------- ----- 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss " SYNTAX OCTET STRING (SIZE (5)) TAntHeight ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a2d.1d" STATUS current DESCRIPTION "antenna height specification. field octets contents range ----- ------ -------- ----- 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh " SYNTAX OCTET STRING (SIZE (4)) TLocalTimeOffset ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d" STATUS current DESCRIPTION "A local time offset specification. field octets contents range ----- ------ -------- ----- 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours range is 0..13 For example, the -6 local time offset would be displayed as: -6:0 " SYNTAX OCTET STRING (SIZE (3)) TSsm ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "The ssm hex code" SYNTAX INTEGER (0..255) -- -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.9070.1.2.5.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1 ntpStatus OBJECT IDENTIFIER ::= { symmNTP 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1 ntpCommonStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpCommonStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NTP status table. It provides status for the NTP server operation. There are 7 status parameters." ::= { ntpStatus 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1 ntpCommonStatusEntry OBJECT-TYPE SYNTAX NtpCommonStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the NTP status table. Table index is ifIndex (port and interface index)." INDEX { ifIndex, ntpStatusIndex } ::= { ntpCommonStatusTable 1 } NtpCommonStatusEntry ::= SEQUENCE { ntpStatusIndex Integer32, ntpStatusEnable EnableValue, ntpStatusMode DisplayString, ntpStatusLeapStatus DisplayString, ntpStatusStratumLevel DisplayString, ntpStatusRootDispersion DisplayString, ntpStatusPacketLoad DisplayString, ntpStatusVersion DisplayString } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.1 ntpStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the NTP common status table." ::= { ntpCommonStatusEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.2 ntpStatusEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP enable status for the specified NTP port. It can be Enable (1) or Disable (2). When NTP is disabled at a port, it does not transmit or respond to NTP packets, and all alarms associated with NTP for this port are cleared." ::= { ntpCommonStatusEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.3 ntpStatusMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP operational mode. It can act as server or client. Currently only the server mode is supported." ::= { ntpCommonStatusEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.4 ntpStatusLeapStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP leap second status. Possible values are : No warning, Leap insertion, Leap deletion, Not in sync." ::= { ntpCommonStatusEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.5 ntpStatusStratumLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The stratum level of the reference for the NTP clock at the specified port. Its range is 1-4. Only stratum level 1(PRC/PRS) is supported." ::= { ntpCommonStatusEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.6 ntpStatusRootDispersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Root dispersion. Hardcoded to be 0." ::= { ntpCommonStatusEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.7 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.7 ntpStatusPacketLoad OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "NTP packet response load. Its range is 1-100 in unit of %." ::= { ntpCommonStatusEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.8 -- 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.8 ntpStatusVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "NTP protocol version. Only version 4 is supported." ::= { ntpCommonStatusEntry 8 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2 ntpConfig OBJECT IDENTIFIER ::= { symmNTP 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1 ntpCommonConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpCommonConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NTP server configuration table." ::= { ntpConfig 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1 ntpCommonConfigEntry OBJECT-TYPE SYNTAX NtpCommonConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the NTP server configuration table. Table index is ifIndex (port and interface index)." INDEX { ifIndex, ntpCommonIndex } ::= { ntpCommonConfigTable 1 } NtpCommonConfigEntry ::= SEQUENCE { ntpCommonIndex Integer32, ntpCommonState EnableValue, ntpCommonTTL Unsigned32, ntpCommonDSCP EnableValue, ntpCommonDSCPValue Unsigned32, ntpCommonVlanId INTEGER, ntpCommonServiceLoadAlarmThreshold Integer32 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.1 ntpCommonIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the NTP common parameter configuration table." ::= { ntpCommonConfigEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.2 ntpCommonState OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP service enable state for the specified port. It can be Enable (1) or Disable (2). Default value is Enable. When NTP is disabled at a port, it does not transmit or respond to NTP packets, and all alarms associated with NTP for this port are cleared." ::= { ntpCommonConfigEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.3 ntpCommonTTL OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "IP header time-to-live (TTL) field for the NTP packets. Range is 1-255. Default value is 64." ::= { ntpCommonConfigEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.4 ntpCommonDSCP OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Differentiated service code point (DSCP) state for the specified NTP port. It can be either Enable (1) or Disable (2). Default value is Disable. If DSCP state is Enable, the QoS field will have a configured DSCP value." ::= { ntpCommonConfigEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.5 ntpCommonDSCPValue OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "DSCP value for PTP packets leaving this port. Range is 0-63, and default value is 0." ::= { ntpCommonConfigEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.6 ntpCommonVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID associated with the NTP service at this port. Each port only supports one NTP VLAN." ::= { ntpCommonConfigEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.7 ntpCommonServiceLoadAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (10..100) MAX-ACCESS read-write STATUS current DESCRIPTION "It shows percentage (%) of NTP service load alarm threshold" ::= { ntpCommonConfigEntry 7 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.2.3 -- 1.3.6.1.4.1.9070.1.2.5.1.2.3 ntpConformance OBJECT-IDENTITY STATUS current DESCRIPTION "This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. " ::= { symmNTP 3 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6.1 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.1 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.1 ntpCompliances OBJECT IDENTIFIER ::= { ntpConformance 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.1.1 -- this module -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.1.1 ntpBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which have NTP packet service." MODULE -- this module MANDATORY-GROUPS { ntpStatusGroup, ntpConfigGroup } ::= { ntpCompliances 1 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6.2 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.2 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.2 -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.2 -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.2 ntpUocGroups OBJECT IDENTIFIER ::= { ntpConformance 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.2.1 ntpStatusGroup OBJECT-GROUP OBJECTS { ntpStatusEnable, ntpStatusMode, ntpStatusLeapStatus, ntpStatusStratumLevel, ntpStatusRootDispersion, ntpStatusPacketLoad, ntpStatusVersion } STATUS current DESCRIPTION "A collection of objects providing information applicable to NTP status group." ::= { ntpUocGroups 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.2.2 -- 1.3.6.1.4.1.9070.1.2.5.1.2.3.2.2 ntpConfigGroup OBJECT-GROUP OBJECTS { ntpCommonState, ntpCommonTTL, ntpCommonDSCP, ntpCommonDSCPValue, ntpCommonVlanId, ntpCommonServiceLoadAlarmThreshold } STATUS current DESCRIPTION "A collection of objects providing information applicable to NTP configuration group." ::= { ntpUocGroups 2 } END -- -- SYMMNTP.my --