-- -- SYMMCOMMONPTP.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Thursday, July 28, 2011 at 14:47:19 -- -- SYMMCOMMONPTP.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Friday, July 01, 2011 at 14:07:15 -- -- SYMMCOMMONPTP.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Wednesday, March 23, 2011 at 13:51:35 -- SYMMCOMMONPTP DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex FROM ENTITY-MIB ifNumber, ifIndex FROM IF-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC symmPacketService, EnableValue FROM SYMM-COMMON-SMI; -- 1.3.6.1.4.1.9070.1.2.5.1.1 -- February 24, 2011 at 17:46 GMT -- February 24, 2011 at 17:47 GMT -- 1.3.6.1.4.1.9070.1.2.5.1.1 -- February 24, 2011 at 17:46 GMT -- February 24, 2011 at 17:47 GMT -- 1.3.6.1.4.1.9070.1.2.5.1.1 symmPTPv2 MODULE-IDENTITY LAST-UPDATED "201807310620Z" -- July 31, 2018 at 06:20 GMT ORGANIZATION "Symmetricom" CONTACT-INFO "Symmetricom Technical Support 1-888-367-7966 toll free USA 1-408-428-7907 worldwide Support@symmetricom.com" DESCRIPTION "This is the Symmetricom PTPv2 MIB. It has two main nodes: PTPv2 status and PTPv2 configuration." REVISION "201807310620Z" -- July 31, 2018 at 06:20 GMT DESCRIPTION "Symmetricom common PTP v2 packet service MIB" ::= { symmPacketService 1 } -- -- Type definitions -- -- Type definitions -- -- Type definitions -- PTPPROFILEVALUE ::= INTEGER { profileTelecom2008(1), profileDefault(2), profileHybrid(3), profileITU8265one(4), profileEthernetDefault(5), profileITU8275one(6), profileITU8275two(7) } PTPTIMESCALETYPE ::= INTEGER { auto(1), arb(2), ptp(3) } PTPMGMTADDRTYPE ::= INTEGER { unicast(0), multicast(1) } PTPTRANSPORTTYPE ::= INTEGER { ethernet(1), ipv4(2) } PTPADDRMODETYPE ::= INTEGER { unicast(0), multicast(1), multicasthybrid(2) } PORTSTATEVALUE ::= INTEGER { enable(1), disable(2) } G82751McAddrValue ::= INTEGER { mac011b19000000(1), mac0180c200000e(2) } VLANID ::= INTEGER { none(1) } -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- DateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" STATUS current DESCRIPTION "A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present." SYNTAX OCTET STRING (SIZE (8 | 11)) TLatAndLon ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d:1d.1d" STATUS current DESCRIPTION "antenna latitude and longitude specification. field octets contents range ----- ------ -------- ----- 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss " SYNTAX OCTET STRING (SIZE (5)) TAntHeight ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a2d.1d" STATUS current DESCRIPTION "antenna height specification. field octets contents range ----- ------ -------- ----- 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh " SYNTAX OCTET STRING (SIZE (4)) TLocalTimeOffset ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d" STATUS current DESCRIPTION "A local time offset specification. field octets contents range ----- ------ -------- ----- 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours range is 0..13 For example, the -6 local time offset would be displayed as: -6:0 " SYNTAX OCTET STRING (SIZE (3)) TSsm ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "The ssm hex code" SYNTAX INTEGER (0..255) -- -- Node definitions -- -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.9070.1.2.5.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1 ptpv2Status OBJECT IDENTIFIER ::= { symmPTPv2 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1 ptpv2StatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Ptpv2StatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PTP status table. This table provides status for the PTP grandmaster operation." ::= { ptpv2Status 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1 ptpv2StatusEntry OBJECT-TYPE SYNTAX Ptpv2StatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the PTPv2 status table. Table index is ifIndex (port and interface index)." INDEX { ifIndex, ptpv2StatusIndex } ::= { ptpv2StatusTable 1 } Ptpv2StatusEntry ::= SEQUENCE { ptpv2StatusIndex Integer32, ptpv2StatusPortEnable EnableValue, ptpv2StatusClockID DisplayString, ptpv2StatusProfile PTPPROFILEVALUE, ptpv2StatusClockClass DisplayString, ptpv2StatusClockAccuracy DisplayString, ptpv2StatusTimescale PTPTIMESCALETYPE, ptpv2StatusNumClient INTEGER, ptpv2StatusClientLoad DisplayString } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.1 ptpv2StatusIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a local index that is not accessible. Range is 1 - 1000." ::= { ptpv2StatusEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.2 ptpv2StatusPortEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-only STATUS current DESCRIPTION "PTP port state control used to enable or disable PTP service. Values can be Enable (1) or Disable (2). " ::= { ptpv2StatusEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.3 ptpv2StatusClockID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Clock ID uniquely identifies a PTP clock at a PTP port. It is a 64-bit identifier. In TP5K system each physical PTP port supports one PTP clock. " ::= { ptpv2StatusEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.4 ptpv2StatusProfile OBJECT-TYPE SYNTAX PTPPROFILEVALUE MAX-ACCESS read-only STATUS current DESCRIPTION "PTP profile supported by the specified PTP port. TP5K system supports the following profiles: (1)Telecom-2008, (2)Default, (3)Hybrid, (4)ITU G.8265.1, (5)Ethernet-default, (6)ITU G.8275.1. (7) ITU G.8275.2 The user guide has descriptions of different profiles and the values of the PTP attributes for each profile. " ::= { ptpv2StatusEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.5 ptpv2StatusClockClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PTP clock class is a quality level indication for a PTP clock. Table 5 in IEEE 1588 v2 defines clock classes for general use. ITU G.8265.1 provides a mapping between PTP clock class and synchronization clock quality level for the ITU telecom profile. " ::= { ptpv2StatusEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.6 ptpv2StatusClockAccuracy OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PTP clock accuracy is the expected clock accuracy when the PTP clock is used as a grandmaster. It is used as a selection criterion in the best master clock (BMC) algorithm. " ::= { ptpv2StatusEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.7 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.7 ptpv2StatusTimescale OBJECT-TYPE SYNTAX PTPTIMESCALETYPE MAX-ACCESS read-only STATUS current DESCRIPTION "PTP timescale used by the PTP clock. It can be ARB (2) or PTP (3). If timescale is PTP, the epoch is 1 January 1970 00:00:00 TAI, which is 31 December 1969 23:59:51.999918 UTC. " ::= { ptpv2StatusEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.7 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.8 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.8 ptpv2StatusNumClient OBJECT-TYPE SYNTAX INTEGER (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PTP clients connected to a PTP port. It value is 0 - 1000. " ::= { ptpv2StatusEntry 8 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.8 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.9 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.9 ptpv2StatusClientLoad OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of PTP client load on a PTP port. This is the percentage of connected client relative to the maximum number of clients that the port can support. " ::= { ptpv2StatusEntry 9 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2 ptpv2ClientDataTable OBJECT-TYPE SYNTAX SEQUENCE OF Ptpv2ClientDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP client data table contains raw data for PTP clients. " ::= { ptpv2Status 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1 ptpv2ClientDataEntry OBJECT-TYPE SYNTAX Ptpv2ClientDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry to the client data table. Table index is the local index." INDEX { ptpv2ClientDataIndex } ::= { ptpv2ClientDataTable 1 } Ptpv2ClientDataEntry ::= SEQUENCE { ptpv2ClientDataIndex Integer32, ptpv2ClientData DisplayString } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1.1 ptpv2ClientDataIndex OBJECT-TYPE SYNTAX Integer32 (1..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Client data index is a local index. This local index is also called client number. " ::= { ptpv2ClientDataEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1.2 ptpv2ClientData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Sync interval Client Data is a string of raw data for the entry. It contains the following PTP client information: 1.Module ID (where the client is physically connected) 2.Port ID (where the client is physically connected) 3.Client IP address 4.VLAN ID 5.VLAN priority 6.Client Clock ID 7.Client mode (Clients in TP5K client list are either dynamic or static. Dynamic clients are regular clients that negotiate with GM, and they can come and go from the client list. TP5K also support 10 or 16 static clients that are always on the client list and the GM will always send PTP packets to them whether they respond or not.) 8.Announce interval 9.Sync Interval 10.Delay response interval " ::= { ptpv2ClientDataEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2 ptpv2Config OBJECT IDENTIFIER ::= { symmPTPv2 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1 ptpv2CommonTable OBJECT-TYPE SYNTAX SEQUENCE OF Ptpv2CommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PTP common parameter table has PTP parameters that are not specific to the unicast or multicast addressing mode. " ::= { ptpv2Config 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1 ptpv2CommonEntry OBJECT-TYPE SYNTAX Ptpv2CommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the PTP common parameter table. Table index is ifIndex (port and interface index). " INDEX { ifIndex, ptpv2CommonIndex } ::= { ptpv2CommonTable 1 } Ptpv2CommonEntry ::= SEQUENCE { ptpv2CommonIndex Integer32, ptpv2Profile PTPPROFILEVALUE, ptpv2ClockID DisplayString, ptpv2Priority1 Unsigned32, ptpv2Priority2 Unsigned32, ptpv2Domain Unsigned32, ptpv2DSCPState EnableValue, ptpv2DSCPValue Unsigned32, ptpv2State EnableValue, ptpv2MaxClient Integer32, ptpv2AnnounceLimit INTEGER, ptpv2SyncLimit INTEGER, ptpv2DelayLimit INTEGER, ptpv2TwoStep EnableValue, ptpv2MgmtAddrMode PTPMGMTADDRTYPE, ptpv2TTL Unsigned32, ptpv2AlternateGM EnableValue, ptpv2TimeScale PTPTIMESCALETYPE, ptpv2Dither EnableValue, ptpv2ServiceLoadAlarmThreshold Integer32 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.1 ptpv2CommonIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a local index of the PTP common parameter table. " ::= { ptpv2CommonEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.2 ptpv2Profile OBJECT-TYPE SYNTAX PTPPROFILEVALUE MAX-ACCESS read-write STATUS current DESCRIPTION "Select a PTP profile for the specified PTP port. TP5K system supports five IPv4 'profiles': (1) Telecom2008, (2) Default, (3) Hybrid, (4) ITU8265one, (5) Ethernet-default (6) ITU8275one,(7) ITU G.8275.2 The user guide has descriptions, different profiles, and the values of the PTP attributes for each profile. " ::= { ptpv2CommonEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.3 ptpv2ClockID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Clock ID uniquely identifies a PTP clock at a PTP port. It is a 64-bit identifier, and its format is xx:xx:xx:xx:xx:xx:xx:xx. In TP5K system, each physical PTP port supports one PTP clock. " ::= { ptpv2CommonEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.4 ptpv2Priority1 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Attribute Priority1 for the specified PTP port. It is used in BMC algorithm as a selection criterion. Its range is 0-255, unless restricted by a PTP profile. Default value is 128. " ::= { ptpv2CommonEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.5 ptpv2Priority2 OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Attribute Priority2 for the specified PTP port. It is used in BMC algorithm as a selection criterion. Its range is 0-255, unless restricted by a PTP profile. Default value is 128. " ::= { ptpv2CommonEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.6 ptpv2Domain OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The PTP domain of the specified PTP port. PTP domain is a logical grouping of PTP clocks. All the PTP clocks in the same domain are synchronized to each other using the PTP protocol. The range of the PTP domain is 0-255. Default value is 0. For ITU telecom profile, range is 4-23 and default is 4. " ::= { ptpv2CommonEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.7 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.7 ptpv2DSCPState OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Differentiated service code point (DSCP) state for the specified PTP port. It can be either Enable (1) or Disable (2). Default value is disable. If DSCP state is Enable, the QoS field will have a configured DSCP value. " ::= { ptpv2CommonEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.7 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.8 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.8 ptpv2DSCPValue OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "DSCP value for PTP packets leaving this port. Value range is 0-63, and default value is 0. " ::= { ptpv2CommonEntry 8 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.8 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.9 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.9 ptpv2State OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "PTP packet service state for the specified PTP port. It can be either Enable (1) or Disable (2). Default value is Enable. When PTP is disabled at a port, it does not transmit or respond to PTP packets, and all alarms associated with PTP for this port are cleared. " ::= { ptpv2CommonEntry 9 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.9 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.10 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.10 ptpv2MaxClient OBJECT-TYPE SYNTAX Integer32 (1..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of PTP clients that are allowed to be connected to this PTP port. Max number of clients (1000 is available in Extended mode only and 1000/1500 is available on ptp client license, otherwise 500). " DEFVAL { 500 } ::= { ptpv2CommonEntry 10 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.10 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.11 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.11 ptpv2AnnounceLimit OBJECT-TYPE SYNTAX INTEGER (-4..4) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum PTP Announce message transmission interval (inverse of the maximum PTP Announce message transmission rate) that the port will accept. This is the exponent of 2, and the value range is -4 to +4. Default is -3. For telecom profile, the range is -3 to +4 and default is 1. If AnnounceLimit = -4, the minimum Announce message transmission interval is = 2^(-4) = 0.0625 seconds, or the maximum message transmission rate is 16 messages per second. " DEFVAL { -3 } ::= { ptpv2CommonEntry 11 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.11 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.12 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.12 ptpv2SyncLimit OBJECT-TYPE SYNTAX INTEGER (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum PTP Sync message interval (inverse of the maximum PTP Sync message transmission rate) that the port will accept. This is the exponent of 2, and the value range is -7 to +7 and default is -7. For telecom profile the range is -7 to +4. If SyncLimit = -4, the minimum Sync message transmission interval is = 2^(-4) = 0.0625 seconds, or the maximum message transmission rate is 16 messages per second. " DEFVAL { -7 } ::= { ptpv2CommonEntry 12 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.12 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.13 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.13 ptpv2DelayLimit OBJECT-TYPE SYNTAX INTEGER (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum PTP Delay_Req message transmission interval that the port will accept (inverse of the maximum PTP Delay_Req message transmission rate). This is the exponent of 2, and the value range is -7 to +7 and default is -7. For telecom profile the range is -7 to +4. If SyncLimit = -4, the minimum Delay_Req message transmission interval is = 2^(-4) = 0.0625 seconds, or the maximum message transmission rate is 16 messages per second. " DEFVAL { -7 } ::= { ptpv2CommonEntry 13 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.13 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.14 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.14 ptpv2TwoStep OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "PTP two-step clock enable. Its value can be Enable (1) or Disable (2). Default value is Disable. If it is disabled, the system will use PTP one-step clock. " ::= { ptpv2CommonEntry 14 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.14 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.15 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.15 ptpv2MgmtAddrMode OBJECT-TYPE SYNTAX PTPMGMTADDRTYPE MAX-ACCESS read-write STATUS current DESCRIPTION "The addressing mode for the PTP management communication between a PTP grandmaster port and PTP clients. It can be either unicast (1) or multicast (2). Default is unicast. " ::= { ptpv2CommonEntry 15 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.16 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.16 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.16 ptpv2TTL OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "IP header time-to-live (TTL) field for the PTP packets. Range is 1-255. Default value is 64. " ::= { ptpv2CommonEntry 16 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.17 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.17 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.17 ptpv2AlternateGM OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "PTP alternate master enable state for the specified PTP port. It can be Enable (1) or Disable (2). Default is Disable. When it is disabled, the port is always a master and does not use BMC. " ::= { ptpv2CommonEntry 17 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.19 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.18 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.18 ptpv2TimeScale OBJECT-TYPE SYNTAX PTPTIMESCALETYPE MAX-ACCESS read-write STATUS current DESCRIPTION "PTP timescale to be used by the PTP clock. It can be Auto (1), ARB (2), or PTP (3). Auto means selecting PTP or ARB depending on the reference mode. If timescale is PTP, the epoch is 1 January 1970 00:00:00 TAI, which is 31 December 1969 23:59:51.999918 UTC. " ::= { ptpv2CommonEntry 18 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.20 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.19 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.19 ptpv2Dither OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "PTP dither state. It can either be Enable (1) or Disable (2). Default is Disable. Dithering is used to randomize packet transmission time to improve performance. " ::= { ptpv2CommonEntry 19 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.20 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.20 ptpv2ServiceLoadAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (10..100) MAX-ACCESS read-write STATUS current DESCRIPTION "It shows percentage (%) of PTP service load alarm threshold" ::= { ptpv2CommonEntry 20 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2 ptpv2UnicastTable OBJECT-TYPE SYNTAX SEQUENCE OF Ptpv2UnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PTP unicast configuration table for PTP attributes that are specific to unicast. In TP5K 2.0, only the main shelf supports unicast. " ::= { ptpv2Config 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1 ptpv2UnicastEntry OBJECT-TYPE SYNTAX Ptpv2UnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry to the PTP unicast configuration table. Table index is ifIndex. The unicast table has two attributes: unicast negotiation state and unicast lease duration limit. " INDEX { ifIndex, ptpv2UnicastIndex } ::= { ptpv2UnicastTable 1 } Ptpv2UnicastEntry ::= SEQUENCE { ptpv2UnicastIndex Integer32, ptpv2UnicastNeg EnableValue, ptpv2UnicastLeaseDurLimit Integer32, ptpv2UnicastInterfaceRateTLV EnableValue, ptpv2UnicastLeaseExtension Integer32 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.1 ptpv2UnicastIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the PTP unicast configuration table." ::= { ptpv2UnicastEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.2 ptpv2UnicastNeg OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Unicast negotiation state for the specified port. Its value can be Enable (1) or Disable (2). " ::= { ptpv2UnicastEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.3 ptpv2UnicastLeaseDurLimit OBJECT-TYPE SYNTAX Integer32 (10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Unicast least duration limit (in seconds) is the maximum unicast lease duration request that the grandmaster will accept. Its range is 10 to 1000 seconds. Default value is 300 seconds. " ::= { ptpv2UnicastEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.4 ptpv2UnicastInterfaceRateTLV OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setup PTP interface rate TLV state." ::= { ptpv2UnicastEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.5 ptpv2UnicastLeaseExtension OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Setup PTP Lease Extension. Default value 0. Range 0-1000" DEFVAL { 0 } ::= { ptpv2UnicastEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3 ptpv2MulticastTable OBJECT-TYPE SYNTAX SEQUENCE OF Ptpv2MulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PTP multicast table for PTP attributes that are specific to multicast. In TP5K 2.0, main shelf and expansion shelves all support multicast. " ::= { ptpv2Config 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1 ptpv2MulticastEntry OBJECT-TYPE SYNTAX Ptpv2MulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry to the PTP multicast configuration table. Table index is ifIndex. The multicast table has 6 multicast attributes. " INDEX { ifIndex, ptpv2MulticastIndex } ::= { ptpv2MulticastTable 1 } Ptpv2MulticastEntry ::= SEQUENCE { ptpv2MulticastIndex Integer32, ptpv2MulticastAnnounceInt INTEGER, ptpv2MulticastSyncInt INTEGER, ptpv2MulticastDelayInt INTEGER, ptpv2MulticastAnnoTimeout INTEGER, ptpv2MulticastVlanId INTEGER, ptpv2MulticastClientTimeout INTEGER } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.1 ptpv2MulticastIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the PTP multicast configuration table." ::= { ptpv2MulticastEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.2 ptpv2MulticastAnnounceInt OBJECT-TYPE SYNTAX INTEGER (-4..4) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP multicast Announce message transmission interval (inverse of the maximum PTP multicast Announce message transmission rate). This is the exponent of 2, and the value range is -4 to +4. Default value is 1 (which means 2 seconds). If the value of the multicast Announce transmission interval is -4, the message transmission interval is = 2^(-4) = 0.0625 seconds, or the message transmission rate is 16 messages per second. " ::= { ptpv2MulticastEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.3 ptpv2MulticastSyncInt OBJECT-TYPE SYNTAX INTEGER (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP multicast Sync message transmission interval (inverse of the maximum PTP multicast Sync message transmission rate). This is the exponent of 2, and the value range is -7 to +7. Default value is 0 (i.e. 1 second). If the value of the multicast Sync transmission interval is -4, the message transmission interval is = 2^(-4) = 0.0625 seconds, or the message transmission rate is 16 messages per second. " ::= { ptpv2MulticastEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.4 ptpv2MulticastDelayInt OBJECT-TYPE SYNTAX INTEGER (-7..7) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP multicast Delay_Req message transmission interval (inverse of the maximum PTP multicast Delay_Req message transmission rate). This is the exponent of 2, and the value range is -7 to +7.Default value is -7. If the value of the multicast Delay_Req transmission interval is -4, the message transmission interval is = 2^(-4) = 0.0625 seconds, or the message transmission rate is 16 messages per second. " ::= { ptpv2MulticastEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.5 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.5 ptpv2MulticastAnnoTimeout OBJECT-TYPE SYNTAX INTEGER (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast Announce Receipt Timeout. Its range is 2 to 10 and its unit is number of intervals. Default value is 3 (intervals). It is the number of Announce intervals that has to pass without receiving an Announce message before the PTP port declares Announce_Receipt_Timeout_Expires. If the timeout value is 2 and the multicast announce interval is 4 seconds, then the multicast announce receipt timeout value is 2*4 = 8 seconds. " DEFVAL { 2 } ::= { ptpv2MulticastEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.5 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.6 ptpv2MulticastVlanId OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast VLAN ID of the specified PTP port. Each multicast PTP port only supports one VLAN. Range is 0 to 4094. Default value is 0. " ::= { ptpv2MulticastEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.6 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.7 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.7 ptpv2MulticastClientTimeout OBJECT-TYPE SYNTAX INTEGER (10..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast client timeout. Range is 10 to 3600 seconds. Default value is 300 seconds. TP5000 maintains a list of active PTP clients. If the grandmaster does not receive Delay_Req message from a client for more than this timeout value, the client is removed from the TP5000 client list. " DEFVAL { 360 } ::= { ptpv2MulticastEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4 ptpv2G82751Table OBJECT-TYPE SYNTAX SEQUENCE OF Ptpv2G82751Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PTP itu-g8276-1 configuration table for PTP attributes that are specific to itu-g8276-1. In TP5K 2.2, only the main shelf supports itu-g8276-1. " ::= { ptpv2Config 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1 ptpv2G82751Entry OBJECT-TYPE SYNTAX Ptpv2G82751Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry to the PTP G82751 configuration table. Table index is ifIndex. The G82751 table has two attributes: multicast address and G82751 local priority. " INDEX { ifIndex, ptpv2G82751Index } ::= { ptpv2G82751Table 1 } Ptpv2G82751Entry ::= SEQUENCE { ptpv2G82751Index Integer32, ptpv2G82751MulticastAddr G82751McAddrValue, ptpv2G82751LocalPriority Integer32 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.1 ptpv2G82751Index OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the PTP G82751 configuration table." ::= { ptpv2G82751Entry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.2 ptpv2G82751MulticastAddr OBJECT-TYPE SYNTAX G82751McAddrValue MAX-ACCESS read-write STATUS current DESCRIPTION "G82751 multicast address for the specified port. The valid setting should be mac011b19000000 (1) or mac0180c200000e (2) " ::= { ptpv2G82751Entry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.3 ptpv2G82751LocalPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP G82751 local priority, the valid range is 1 to 255." ::= { ptpv2G82751Entry 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.5 --.1.3.6.1.4.1.9070.1.2.5.1.1.2.5 ptpv2ReflectorTable OBJECT-TYPE SYNTAX SEQUENCE OF Ptpv2ReflectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP Unicast Reflector Table" ::= { ptpv2Config 5 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1 ptpv2ReflectorEntry OBJECT-TYPE SYNTAX Ptpv2ReflectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry to the PTP Reflector configuration table. Table index is ifIndex. " INDEX { ifIndex, ptpv2ReflectorIndex } ::= { ptpv2ReflectorTable 1 } Ptpv2ReflectorEntry ::= SEQUENCE { ptpv2ReflectorIndex Integer32, ptpv2ReflectorAnnounceIntv INTEGER, ptpv2ReflectorSyncDelayIntv INTEGER, ptpv2ReflectorClientTimeout Integer32, ptpv2ReflectorVlanID Integer32 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.1 ptpv2ReflectorIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the PTP Reflector configuration table." ::= { ptpv2ReflectorEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.2 ptpv2ReflectorAnnounceIntv OBJECT-TYPE SYNTAX INTEGER (-3..0) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP unicast reflector announce interval. Valid range -3 to 0" ::= { ptpv2ReflectorEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.3 ptpv2ReflectorSyncDelayIntv OBJECT-TYPE SYNTAX INTEGER (-7..-4) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP unicast reflector sync-delay interval. Valid range -7 to -4" ::= { ptpv2ReflectorEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.4 ptpv2ReflectorClientTimeout OBJECT-TYPE SYNTAX Integer32 (60..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP unicast reflector Client timeout. Valid range 60 to 1000" ::= { ptpv2ReflectorEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.5 ptpv2ReflectorVlanID OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "PTP unicast reflector Vlan-ID. Valid range 2 to 4096. Enter 0 for NONE, 1 denotes Invalid" ::= { ptpv2ReflectorEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3 ptpv2Conformance OBJECT-IDENTITY STATUS current DESCRIPTION "This subtree contains conformance statements for the SYMMCOMMONPTP MIB module. " ::= { symmPTPv2 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.1 ptpv2Compliances OBJECT IDENTIFIER ::= { ptpv2Conformance 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.1.1 -- this module -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.1.1 -- this module -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.1.1 ptpv2BasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which have PTP packet service." MODULE -- this module MANDATORY-GROUPS { ptpv2StatusGroup, ptpv2ClientDataGroup, ptpv2CommonGroup, ptpv2UnicastGroup, ptpv2MulticastGroup, ptpv2G82751Group } ::= { ptpv2Compliances 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2 ptpv2UocGroups OBJECT IDENTIFIER ::= { ptpv2Conformance 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.1 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.1 ptpv2StatusGroup OBJECT-GROUP OBJECTS { ptpv2StatusPortEnable, ptpv2StatusClockID, ptpv2StatusProfile, ptpv2StatusClockClass, ptpv2StatusClockAccuracy, ptpv2StatusTimescale, ptpv2StatusNumClient, ptpv2StatusClientLoad } STATUS current DESCRIPTION "A collection of objects providing information applicable to PTP status group." ::= { ptpv2UocGroups 1 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.2 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.2 ptpv2ClientDataGroup OBJECT-GROUP OBJECTS { ptpv2ClientDataIndex, ptpv2ClientData } STATUS current DESCRIPTION "A collection of objects providing information applicable to PTP client group." ::= { ptpv2UocGroups 2 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.3 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.3 ptpv2CommonGroup OBJECT-GROUP OBJECTS { ptpv2Profile, ptpv2ClockID, ptpv2Priority1, ptpv2Priority2, ptpv2Domain, ptpv2DSCPState, ptpv2DSCPValue, ptpv2State, ptpv2MaxClient, ptpv2AnnounceLimit, ptpv2SyncLimit, ptpv2DelayLimit, ptpv2TwoStep, ptpv2MgmtAddrMode, ptpv2TTL, ptpv2AlternateGM, ptpv2TimeScale, ptpv2Dither } STATUS current DESCRIPTION "A collection of objects providing information applicable to PTP common group." ::= { ptpv2UocGroups 3 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.4 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.4 ptpv2UnicastGroup OBJECT-GROUP OBJECTS { ptpv2UnicastNeg, ptpv2UnicastLeaseDurLimit, ptpv2UnicastInterfaceRateTLV, ptpv2UnicastLeaseExtension} STATUS current DESCRIPTION "A collection of objects providing information applicable to PTP unicast group." ::= { ptpv2UocGroups 4 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.5 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.5 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.5 ptpv2MulticastGroup OBJECT-GROUP OBJECTS { ptpv2MulticastAnnounceInt, ptpv2MulticastSyncInt, ptpv2MulticastDelayInt, ptpv2MulticastAnnoTimeout, ptpv2MulticastVlanId, ptpv2MulticastClientTimeout } STATUS current DESCRIPTION "A collection of objects providing information applicable to PTP multicast group." ::= { ptpv2UocGroups 5 } -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.6 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.6 -- 1.3.6.1.4.1.9070.1.2.5.1.1.3.2.6 ptpv2G82751Group OBJECT-GROUP OBJECTS { ptpv2G82751MulticastAddr, ptpv2G82751LocalPriority} STATUS current DESCRIPTION "A collection of objects providing information applicable to PTP G82751 group." ::= { ptpv2UocGroups 6 } END -- -- SYMMCOMMONPTP.my --