-- |**********************************************************************| -- | Copyright 1998 - Sonoma Systems, Inc. Marina del Rey, CA 90292 | -- | Unpublished software - All rights reserved. | -- | | -- | The information in this software is subject to change without notice | -- | and should not be construed as a commitment by Sonoma Systems, Inc. | -- | | -- | Sonoma Systems, Inc. assumes no responsibility for the use or | -- | reliability of its software on equipment which is not supplied by | -- | Sonoma Systems, Inc. | -- | | -- | This software is furnished under a license and may be copied only | -- | under the terms of that license and with the inclusion of this | -- | notice. This software, or any other copies thereof, may not be | -- | provided or otherwise made available to any other person except to | -- | one who agrees to these license terms. Title to and ownership of the | -- | software shall at all times remain with Sonoma Systems, Inc. | -- |**********************************************************************| -- -- Sonoma Systems Inc., -- 4640 Admiralty Way, Suite #600, -- Marina Del Rey, -- California 90292-6695. -- -- Web : www.sonoma-systems.com -- Phone: 310.827.8000 -- -- NAME : e1mib.def -- -- DESCRIPTION : This is the MIB for the Sonoma ATM/E1 interface. -- -- ARCHIVE : $Archive: M:\pvcs\pvcsproj\sonoma3\src\mib\e1mib.dev $ -- REVISION: $Revision: 1.4 $ -- AUTHOR : $Author: FREEVE $ -- DATE : $Date: Nov 13 1998 10:33:26 $ SONOMASYSTEMS-SONOMA-ATM-E1-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 sonomaATM FROM SONOMASYSTEMS-SONOMA-MIB; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [14]; -- -- Hierarchy for these groups -- enterprises OBJECT IDENTIFIER ::= { private 4 } -- sonomaSystems OBJECT IDENTIFIER ::= { enterprises 2926 } -- sonomaSeries OBJECT IDENTIFIER ::= { sonomaSystems 25 } -- sonomaATM OBJECT IDENTIFIER ::= { sonomaSeries 7 } sonomaE1ATMAdapterGroup OBJECT IDENTIFIER ::= { sonomaATM 6 } -- Sonoma E1 ATM Adapter Specific Group MIB groups atmE1ConfGroup OBJECT IDENTIFIER ::= { sonomaE1ATMAdapterGroup 1 } atmE1StatsGroup OBJECT IDENTIFIER ::= { sonomaE1ATMAdapterGroup 2 } -- Sonoma E1 ATM Adapter Specific Group MIB groups -- This group contains all informat specificly for -- Sonoma Systems E1 adapter. It includes the configuration and -- some statistics information -- atmE1ConfGroup atmE1ConfPhyTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmE1ConfPhyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of physical layer configuration for the E1 interface" ::= { atmE1ConfGroup 1 } atmE1ConfPhyEntry OBJECT-TYPE SYNTAX AtmE1ConfPhyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A entry in the table, containing information about the physical layer of a E1 interface" INDEX { atmE1ConfPhysIndex } ::= { atmE1ConfPhyTable 1 } AtmE1ConfPhyEntry ::= SEQUENCE { atmE1ConfPhysIndex INTEGER, atmE1ConfLoopback INTEGER, atmE1ConfTxClockSelect INTEGER, atmE1ConfFillerCells INTEGER } atmE1ConfPhysIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical interface index." ::= { atmE1ConfPhyEntry 1 } atmE1ConfLoopback OBJECT-TYPE SYNTAX INTEGER { disabled(1), internal(2), external(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to modify the state of internal loopback...." DEFVAL { disabled } ::= { atmE1ConfPhyEntry 2 } atmE1ConfTxClockSelect OBJECT-TYPE SYNTAX INTEGER { internal(1), recovered(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configure the transmit clock." DEFVAL { internal } ::= { atmE1ConfPhyEntry 3 } atmE1ConfFillerCells OBJECT-TYPE SYNTAX INTEGER { unassigned(1), idle(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the type of filler cells to send when there are no data cells." DEFVAL { unassigned } ::= { atmE1ConfPhyEntry 4 } -- atmE1StatsGroup atmE1StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmE1StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of physical layer statistics information for the E1 interface" ::= { atmE1StatsGroup 1 } atmE1StatsEntry OBJECT-TYPE SYNTAX AtmE1StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A entry in the table, containing information about the physical layer of a E1 interface" INDEX { atmE1StatsPhysIndex } ::= { atmE1StatsTable 1 } AtmE1StatsEntry ::= SEQUENCE { atmE1StatsPhysIndex INTEGER, atmE1StatsNoSignals Counter, atmE1StatsRAIDetects Counter, atmE1StatsFASErrors Counter, atmE1StatsCVErrors Counter, atmE1StatsCRCErrors Counter, atmE1StatsEBitErrors Counter, atmE1StatsSyncLossCount Counter, atmE1StatsHECErrors Counter, atmE1StatsSignalLoss INTEGER, atmE1StatsRAIDetect INTEGER, atmE1StatsSyncLoss INTEGER, atmE1StatsTxClockLoss INTEGER, atmE1StatsClearCounters INTEGER } atmE1StatsPhysIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical interface index." ::= { atmE1StatsEntry 1 } atmE1StatsNoSignals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No signal error counter." ::= { atmE1StatsEntry 2 } atmE1StatsRAIDetects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "RAI Detect counter." ::= {atmE1StatsEntry 3 } atmE1StatsFASErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "FAS (Frame Alignment Signal) error counter." ::= { atmE1StatsEntry 4 } atmE1StatsCVErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CV (Code Violation) error counter." ::= { atmE1StatsEntry 5 } atmE1StatsCRCErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "CRC4 error counter." ::= { atmE1StatsEntry 6 } atmE1StatsEBitErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "E-Bit (FEBE) error counter." ::= { atmE1StatsEntry 7 } atmE1StatsSyncLossCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sync Loss counter." ::= { atmE1StatsEntry 8 } atmE1StatsHECErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "HEC error counter." ::= { atmE1StatsEntry 9 } atmE1StatsSignalLoss OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Signal loss indication." ::= { atmE1StatsEntry 10 } atmE1StatsRAIDetect OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "RAI indication." ::= { atmE1StatsEntry 11 } atmE1StatsSyncLoss OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss of sync indication." ::= { atmE1StatsEntry 12 } atmE1StatsTxClockLoss OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Loss of transmit clock indication." ::= { atmE1StatsEntry 13 } atmE1StatsClearCounters OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear all counters in this group ONLY." DEFVAL { false } ::= { atmE1StatsEntry 14 } END